Re: [PATCH 7/9] drm/bridge: tc358767: Introduce tc_set_syspllparam()

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Andrey,

Thank you for the patch.

On Tue, Feb 26, 2019 at 11:36:07AM -0800, Andrey Smirnov wrote:
> Move common code converting clock rate to an appropriate constant and
> configuring SYS_PLLPARAM register into a separate routine and convert
> the rest of the code to use it. No functional change intended.
> 
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> Cc: Archit Taneja <architt@codeaurora.org>
> Cc: Andrzej Hajda <a.hajda@samsung.com>
> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
> Cc: Chris Healy <cphealy@gmail.com>
> Cc: Lucas Stach <l.stach@pengutronix.de>
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-kernel@vger.kernel.org

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  drivers/gpu/drm/bridge/tc358767.c | 50 +++++++++++++------------------
>  1 file changed, 20 insertions(+), 30 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
> index 54ff95f66e30..227f14cd2d3d 100644
> --- a/drivers/gpu/drm/bridge/tc358767.c
> +++ b/drivers/gpu/drm/bridge/tc358767.c
> @@ -522,35 +522,42 @@ static int tc_stream_clock_calc(struct tc_data *tc)
>  	return regmap_write(tc->regmap, DP0_VIDMNGEN1, 32768);
>  }
>  
> -static int tc_aux_link_setup(struct tc_data *tc)
> +static int tc_set_syspllparam(struct tc_data *tc)
>  {
>  	unsigned long rate;
> -	u32 value;
> -	int ret;
> -	u32 dp_phy_ctrl;
> +	u32 pllparam = SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
>  
>  	rate = clk_get_rate(tc->refclk);
>  	switch (rate) {
>  	case 38400000:
> -		value = REF_FREQ_38M4;
> +		pllparam |= REF_FREQ_38M4;
>  		break;
>  	case 26000000:
> -		value = REF_FREQ_26M;
> +		pllparam |= REF_FREQ_26M;
>  		break;
>  	case 19200000:
> -		value = REF_FREQ_19M2;
> +		pllparam |= REF_FREQ_19M2;
>  		break;
>  	case 13000000:
> -		value = REF_FREQ_13M;
> +		pllparam |= REF_FREQ_13M;
>  		break;
>  	default:
>  		dev_err(tc->dev, "Invalid refclk rate: %lu Hz\n", rate);
>  		return -EINVAL;
>  	}
>  
> +	return regmap_write(tc->regmap, SYS_PLLPARAM, pllparam);
> +}
> +
> +static int tc_aux_link_setup(struct tc_data *tc)
> +{
> +	int ret;
> +	u32 dp_phy_ctrl;
> +
>  	/* Setup DP-PHY / PLL */
> -	value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
> -	tc_write(SYS_PLLPARAM, value);
> +	ret = tc_set_syspllparam(tc);
> +	if (ret)
> +		return ret;
>  
>  	dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_A0_EN;
>  	if (tc->link.base.num_lanes == 2)
> @@ -811,7 +818,6 @@ static int tc_main_link_setup(struct tc_data *tc)
>  {
>  	struct drm_dp_aux *aux = &tc->aux;
>  	struct device *dev = tc->dev;
> -	unsigned int rate;
>  	u32 dp_phy_ctrl;
>  	int timeout;
>  	u32 value;
> @@ -828,25 +834,9 @@ static int tc_main_link_setup(struct tc_data *tc)
>  		 (tc->link.spread ? DP0_SRCCTRL_SSCG : 0) |
>  		 ((tc->link.base.rate != 162000) ? DP0_SRCCTRL_BW27 : 0));
>  
> -	rate = clk_get_rate(tc->refclk);
> -	switch (rate) {
> -	case 38400000:
> -		value = REF_FREQ_38M4;
> -		break;
> -	case 26000000:
> -		value = REF_FREQ_26M;
> -		break;
> -	case 19200000:
> -		value = REF_FREQ_19M2;
> -		break;
> -	case 13000000:
> -		value = REF_FREQ_13M;
> -		break;
> -	default:
> -		return -EINVAL;
> -	}
> -	value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
> -	tc_write(SYS_PLLPARAM, value);
> +	ret = tc_set_syspllparam(tc);
> +	if (ret)
> +		return ret;
>  
>  	/* Setup Main Link */
>  	dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_A0_EN | PHY_M0_EN;
> -- 
> 2.20.1
> 

-- 
Regards,

Laurent Pinchart