From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Russell King <rmk+kernel@armlinux.org.uk>,
Tony Lindgren <tony@atomide.com>, Sasha Levin <sashal@kernel.org>,
linux-omap@vger.kernel.org
Subject: [PATCH AUTOSEL 4.14 12/27] ARM: OMAP2+: fix lack of timer interrupts on CPU1 after hotplug
Date: Mon, 11 Mar 2019 15:58:09 -0400 [thread overview]
Message-ID: <20190311195824.139043-12-sashal@kernel.org> (raw)
In-Reply-To: <20190311195824.139043-1-sashal@kernel.org>
From: Russell King <rmk+kernel@armlinux.org.uk>
[ Upstream commit 50d6b3cf9403879911e06d69c7ef41e43f8f7b4b ]
If we have a kernel configured for periodic timer interrupts, and we
have cpuidle enabled, then we end up with CPU1 losing timer interupts
after a hotplug.
This can manifest itself in RCU stall warnings, or userspace becoming
unresponsive.
The problem is that the kernel initially wants to use the TWD timer
for interrupts, but the TWD loses context when we enter the C3 cpuidle
state. Nothing reprograms the TWD after idle.
We have solved this in the past by switching to broadcast timer ticks,
and cpuidle44xx switches to that mode at boot time. However, there is
nothing to switch from periodic mode local timers after a hotplug
operation.
We call tick_broadcast_enter() in omap_enter_idle_coupled(), which one
would expect would take care of the issue, but internally this only
deals with one-shot local timers - tick_broadcast_enable() on the other
hand only deals with periodic local timers. So, we need to call both.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
[tony@atomide.com: just standardized the subject line]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/mach-omap2/cpuidle44xx.c | 16 ++++------------
1 file changed, 4 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index a8b291f00109..dae514c8276a 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -152,6 +152,10 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
mpuss_can_lose_context = (cx->mpu_state == PWRDM_POWER_RET) &&
(cx->mpu_logic_state == PWRDM_POWER_OFF);
+ /* Enter broadcast mode for periodic timers */
+ tick_broadcast_enable();
+
+ /* Enter broadcast mode for one-shot timers */
tick_broadcast_enter();
/*
@@ -218,15 +222,6 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
return index;
}
-/*
- * For each cpu, setup the broadcast timer because local timers
- * stops for the states above C1.
- */
-static void omap_setup_broadcast_timer(void *arg)
-{
- tick_broadcast_enable();
-}
-
static struct cpuidle_driver omap4_idle_driver = {
.name = "omap4_idle",
.owner = THIS_MODULE,
@@ -319,8 +314,5 @@ int __init omap4_idle_init(void)
if (!cpu_clkdm[0] || !cpu_clkdm[1])
return -ENODEV;
- /* Configure the broadcast timer on each cpu */
- on_each_cpu(omap_setup_broadcast_timer, NULL, 1);
-
return cpuidle_register(idle_driver, cpu_online_mask);
}
--
2.19.1
next prev parent reply other threads:[~2019-03-11 20:03 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-11 19:57 [PATCH AUTOSEL 4.14 01/27] drm/imx: ignore plane updates on disabled crtcs Sasha Levin
2019-03-11 19:57 ` [PATCH AUTOSEL 4.14 02/27] gpu: ipu-v3: Fix i.MX51 CSI control registers offset Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 03/27] drm/imx: imx-ldb: add missing of_node_puts Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 04/27] gpu: ipu-v3: Fix CSI offsets for imx53 Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 05/27] s390/dasd: fix using offset into zero size array error Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 06/27] Input: pwm-vibra - prevent unbalanced regulator Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 07/27] Input: pwm-vibra - stop regulator after disabling pwm, not before Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 08/27] ARM: OMAP2+: Variable "reg" in function omap4_dsi_mux_pads() could be uninitialized Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 09/27] ASoC: dapm: fix out-of-bounds accesses to DAPM lookup tables Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 10/27] ASoC: rsnd: fixup rsnd_ssi_master_clk_start() user count check Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 11/27] KVM: arm/arm64: Reset the VCPU without preemption and vcpu state loaded Sasha Levin
2019-03-11 19:58 ` Sasha Levin [this message]
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 13/27] Input: cap11xx - switch to using set_brightness_blocking() Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 14/27] Input: ps2-gpio - flush TX work when closing port Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 15/27] Input: matrix_keypad - use flush_delayed_work() Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 16/27] mac80211: Fix Tx aggregation session tear down with ITXQs Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 17/27] ipvs: fix dependency on nf_defrag_ipv6 Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 18/27] floppy: check_events callback should not return a negative number Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 19/27] NFS: Don't use page_file_mapping after removing the page Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 20/27] mm/gup: fix gup_pmd_range() for dax Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 21/27] Revert "mm: use early_pfn_to_nid in page_ext_init" Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 22/27] mm: page_alloc: fix ref bias in page_frag_alloc() for 1-byte allocs Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 23/27] net: hns: Fix object reference leaks in hns_dsaf_roce_reset() Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 24/27] i2c: cadence: Fix the hold bit setting Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 25/27] i2c: bcm2835: Clear current buffer pointers and counts after a transfer Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 26/27] auxdisplay: ht16k33: fix potential user-after-free on module unload Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 27/27] Input: st-keyscan - fix potential zalloc NULL dereference Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190311195824.139043-12-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=rmk+kernel@armlinux.org.uk \
--cc=stable@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox