public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Xiaoyao Li <xiaoyao.li@linux.intel.com>
To: unlisted-recipients:; (no To-header on input)
Cc: "Xiaoyao Li" <xiaoyao.li@linux.intel.com>,
	"Kyle Huey" <khuey@kylehuey.com>, "Chao Gao" <chao.gao@intel.com>,
	"Paolo Bonzini" <pbonzini@redhat.com>,
	"Radim Krčmář" <rkrcmar@redhat.com>,
	"Thomas Gleixner" <tglx@linutronix.de>,
	"Ingo Molnar" <mingo@redhat.com>,
	"Borislav Petkov" <bp@alien8.de>,
	"H. Peter Anvin" <hpa@zytor.com>,
	x86@kernel.org, kvm@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] kvm/x86/vmx: switch MSR_MISC_FEATURES_ENABLES between host and guest
Date: Thu, 14 Mar 2019 14:38:58 +0800	[thread overview]
Message-ID: <20190314063858.18292-1-xiaoyao.li@linux.intel.com> (raw)

CPUID Faulting is a feature about CPUID instruction. When CPUID Faulting is
enabled, all execution of the CPUID instruction outside system-management
mode (SMM) cause a general-protection (#GP) if the CPL > 0.

About this feature, detailed information can be found at
https://www.intel.com/content/dam/www/public/us/en/documents/application-notes/virtualization-technology-flexmigration-application-note.pdf

There is an issue that current kvm doesn't switch the value of
MSR_MISC_FEATURES_ENABLES between host and guest. If MSR_MISC_FEATURES_ENABLES
exists on the hardware cpu, and host enables CPUID faulting (setting the bit 0
of MSR_MISC_FEATURES_ENABLES), it will impact the guest's behavior because
cpuid faulting is enabled by host and passed to guest.

From my tests, when host enables cpuid faulting, it causes guest boot failure
when guest uses *modprobe* to load modules. Below is the error log:

[    1.233556] traps: modprobe[71] general protection fault ip:7f0077f6495c sp:7ffda148d808 error:0 in ld-2.17.so[7f0077f4d000+22000]
[    1.237780] traps: modprobe[73] general protection fault ip:7fad5aba095c sp:7ffd36067378 error:0 in ld-2.17.so[7fad5ab89000+22000]
[    1.241930] traps: modprobe[75] general protection fault ip:7f3edb89495c sp:7fffa1a81308 error:0 in ld-2.17.so[7f3edb87d000+22000]
[    1.245998] traps: modprobe[77] general protection fault ip:7f91d670895c sp:7ffc25fa7f38 error:0 in ld-2.17.so[7f91d66f1000+22000]
[    1.250016] traps: modprobe[79] general protection fault ip:7f0ddbbdc95c sp:7ffe9c34f8d8 error:0 in ld-2.17.so[7f0ddbbc5000+22000]

*modprobe* calls CPUID instruction thus causing cpuid faulting in guest.
At the end, because guest cannot *modprobe* modules, it boots failure.

This patch switches MSR_MISC_FEATURES_ENABLES between host and guest when
hardware has this MSR.

This patch doesn't confict with the commit db2336a80489 ("KVM: x86: virtualize
cpuid faulting"), which provides a software emulation of cpuid faulting for
x86 arch. Below analysing how cpuid faulting will work after applying this patch:

1. If host cpu is AMD. It doesn't have MSR_MISC_FEATURES_ENABLES, so we can just
use the software emulation of cpuid faulting.

2. If host cpu is Intel and it doesn't have MSR_MISC_FEATURES_ENABLES. The same
as case 1, we can just use the software emulation of cpuid faulting.

3. If host cpu is Intel and it has MSR_MISC_FEATURES_ENABLES. With this patch,
it will write guest's value into MSR_MISC_FEATURES_ENABLES when vm entry.
If guest enables cpuid faulting and when guest calls CPUID instruction with
CPL > 0, it will cause #GP exception in guest instead of VM exit because of
CPUID, thus it doesn't go to the kvm emualtion path but ues the hardware
feature. Also it's a benefit that we needn't use VM exit to inject #GP to
emulate cpuid faulting feature.

Intel SDM vol3.25.1.1 specifies the priority between cpuid faulting
and CPUID instruction.

Signed-off-by: Xiaoyao Li <xiaoyao.li@linux.intel.com>
---
 arch/x86/kvm/vmx/vmx.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 30a6bcd735ec..90707fae688e 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -6321,6 +6321,23 @@ static void atomic_switch_perf_msrs(struct vcpu_vmx *vmx)
 					msrs[i].host, false);
 }
 
+static void atomic_switch_msr_misc_features_enables(struct kvm_vcpu *vcpu)
+{
+	u64 host_msr;
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+
+	/* if MSR MISC_FEATURES_ENABLES doesn't exist on the hardware, do nothing*/
+	if (rdmsrl_safe(MSR_MISC_FEATURES_ENABLES, &host_msr))
+		return;
+
+	if (host_msr == vcpu->arch.msr_misc_features_enables)
+		clear_atomic_switch_msr(vmx, MSR_MISC_FEATURES_ENABLES);
+	else
+		add_atomic_switch_msr(vmx, MSR_MISC_FEATURES_ENABLES,
+				      vcpu->arch.msr_misc_features_enables,
+				      host_msr, false);
+}
+
 static void vmx_arm_hv_timer(struct vcpu_vmx *vmx, u32 val)
 {
 	vmcs_write32(VMX_PREEMPTION_TIMER_VALUE, val);
@@ -6562,6 +6579,8 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu)
 
 	atomic_switch_perf_msrs(vmx);
 
+	atomic_switch_msr_misc_features_enables(vcpu);
+
 	vmx_update_hv_timer(vcpu);
 
 	/*
-- 
2.19.1


             reply	other threads:[~2019-03-14  6:50 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-14  6:38 Xiaoyao Li [this message]
2019-03-14  7:06 ` [PATCH] kvm/x86/vmx: switch MSR_MISC_FEATURES_ENABLES between host and guest Xiaoyao Li
2019-03-14  8:43 ` Kyle Huey
2019-03-14 10:43   ` Xiaoyao Li
2019-03-14 11:30     ` Paolo Bonzini
2019-03-14 11:28 ` Paolo Bonzini
2019-03-14 12:10   ` Xiaoyao Li
2019-03-14 12:37   ` Xiaoyao Li
2019-03-14 14:44     ` Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190314063858.18292-1-xiaoyao.li@linux.intel.com \
    --to=xiaoyao.li@linux.intel.com \
    --cc=bp@alien8.de \
    --cc=chao.gao@intel.com \
    --cc=hpa@zytor.com \
    --cc=khuey@kylehuey.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=rkrcmar@redhat.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox