From: Maxime Jourdan <mjourdan@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>
Cc: Maxime Jourdan <mjourdan@baylibre.com>,
linux-clk@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/2] clk: meson-g12a: add video decoder clocks
Date: Tue, 19 Mar 2019 11:11:38 +0100 [thread overview]
Message-ID: <20190319101138.27520-3-mjourdan@baylibre.com> (raw)
In-Reply-To: <20190319101138.27520-1-mjourdan@baylibre.com>
Add the necessary clock parts for:
- VDEC_1: used to feed VDEC_1
- VDEC_HEVC: the "back" part of the VDEC_HEVC block
- VDEC_HEVCF: the "front" part of the VDEC_HEVC block
In previous SoC generations (GXL, GXBB), there was only one VDEC_HEVC
clock, which got split in two parts for G12A.
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
---
drivers/clk/meson/g12a.c | 163 +++++++++++++++++++++++++++++++++++++++
drivers/clk/meson/g12a.h | 8 +-
2 files changed, 170 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index 3a3134976534..6c762a8b32b9 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -1495,6 +1495,151 @@ static struct clk_regmap g12a_vpu = {
},
};
+/* VDEC clocks */
+
+static const char * const g12a_vdec_parent_names[] = {
+ "fclk_div2p5", "fclk_div3", "fclk_div4", "fclk_div5", "fclk_div7",
+ "hifi_pll", "gp0_pll",
+};
+
+static struct clk_regmap g12a_vdec_1_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_VDEC_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 9,
+ .flags = CLK_MUX_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vdec_1_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_names = g12a_vdec_parent_names,
+ .num_parents = ARRAY_SIZE(g12a_vdec_parent_names),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap g12a_vdec_1_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_VDEC_CLK_CNTL,
+ .shift = 0,
+ .width = 7,
+ .flags = CLK_DIVIDER_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vdec_1_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_names = (const char *[]){ "vdec_1_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap g12a_vdec_1 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_VDEC_CLK_CNTL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vdec_1",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "vdec_1_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap g12a_vdec_hevcf_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_VDEC2_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 9,
+ .flags = CLK_MUX_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vdec_hevcf_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_names = g12a_vdec_parent_names,
+ .num_parents = ARRAY_SIZE(g12a_vdec_parent_names),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap g12a_vdec_hevcf_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_VDEC2_CLK_CNTL,
+ .shift = 0,
+ .width = 7,
+ .flags = CLK_DIVIDER_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vdec_hevcf_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_names = (const char *[]){ "vdec_hevcf_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap g12a_vdec_hevcf = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_VDEC2_CLK_CNTL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vdec_hevcf",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "vdec_hevcf_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap g12a_vdec_hevc_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_VDEC2_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 25,
+ .flags = CLK_MUX_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vdec_hevc_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_names = g12a_vdec_parent_names,
+ .num_parents = ARRAY_SIZE(g12a_vdec_parent_names),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap g12a_vdec_hevc_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_VDEC2_CLK_CNTL,
+ .shift = 16,
+ .width = 7,
+ .flags = CLK_DIVIDER_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vdec_hevc_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_names = (const char *[]){ "vdec_hevc_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap g12a_vdec_hevc = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_VDEC2_CLK_CNTL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vdec_hevc",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "vdec_hevc_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
/* VAPB Clock */
static const char * const g12a_vapb_parent_names[] = {
@@ -2615,6 +2760,15 @@ static struct clk_hw_onecell_data g12a_hw_onecell_data = {
[CLKID_PCIE_PLL_DCO_DIV2] = &g12a_pcie_pll_dco_div2.hw,
[CLKID_PCIE_PLL_OD] = &g12a_pcie_pll_od.hw,
[CLKID_PCIE_PLL] = &g12a_pcie_pll.hw,
+ [CLKID_VDEC_1_SEL] = &g12a_vdec_1_sel.hw,
+ [CLKID_VDEC_1_DIV] = &g12a_vdec_1_div.hw,
+ [CLKID_VDEC_1] = &g12a_vdec_1.hw,
+ [CLKID_VDEC_HEVC_SEL] = &g12a_vdec_hevc_sel.hw,
+ [CLKID_VDEC_HEVC_DIV] = &g12a_vdec_hevc_div.hw,
+ [CLKID_VDEC_HEVC] = &g12a_vdec_hevc.hw,
+ [CLKID_VDEC_HEVCF_SEL] = &g12a_vdec_hevcf_sel.hw,
+ [CLKID_VDEC_HEVCF_DIV] = &g12a_vdec_hevcf_div.hw,
+ [CLKID_VDEC_HEVCF] = &g12a_vdec_hevcf.hw,
[NR_CLKS] = NULL,
},
.num = NR_CLKS,
@@ -2803,6 +2957,15 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
&g12a_cpu_clk_trace,
&g12a_pcie_pll_od,
&g12a_pcie_pll_dco,
+ &g12a_vdec_1_sel,
+ &g12a_vdec_1_div,
+ &g12a_vdec_1,
+ &g12a_vdec_hevc_sel,
+ &g12a_vdec_hevc_div,
+ &g12a_vdec_hevc,
+ &g12a_vdec_hevcf_sel,
+ &g12a_vdec_hevcf_div,
+ &g12a_vdec_hevcf,
};
static const struct meson_eeclkc_data g12a_clkc_data = {
diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
index 1393a09730a6..39c41af70804 100644
--- a/drivers/clk/meson/g12a.h
+++ b/drivers/clk/meson/g12a.h
@@ -189,8 +189,14 @@
#define CLKID_PCIE_PLL_DCO 198
#define CLKID_PCIE_PLL_DCO_DIV2 199
#define CLKID_PCIE_PLL_OD 200
+#define CLKID_VDEC_1_SEL 202
+#define CLKID_VDEC_1_DIV 203
+#define CLKID_VDEC_HEVC_SEL 205
+#define CLKID_VDEC_HEVC_DIV 206
+#define CLKID_VDEC_HEVCF_SEL 208
+#define CLKID_VDEC_HEVCF_DIV 209
-#define NR_CLKS 202
+#define NR_CLKS 211
/* include the CLKIDs that have been made part of the DT binding */
#include <dt-bindings/clock/g12a-clkc.h>
--
2.21.0
next prev parent reply other threads:[~2019-03-19 10:12 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-19 10:11 [PATCH v2 0/2] clk: meson: add video decoder clocks for G12A Maxime Jourdan
2019-03-19 10:11 ` [PATCH v2 1/2] dt-bindings: clk: g12a-clkc: add VDEC clock IDs Maxime Jourdan
2019-03-31 6:40 ` Rob Herring
2019-03-19 10:11 ` Maxime Jourdan [this message]
2019-04-01 8:31 ` [PATCH v2 2/2] clk: meson-g12a: add video decoder clocks Neil Armstrong
2019-04-01 8:31 ` [PATCH v2 0/2] clk: meson: add video decoder clocks for G12A Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190319101138.27520-3-mjourdan@baylibre.com \
--to=mjourdan@baylibre.com \
--cc=jbrunet@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox