From: Tom Burkart <tom@aussec.com>
To: Linux kernel mailing list <linux-kernel@vger.kernel.org>,
Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Burkart <tom@aussec.com>,
Rodolfo Giometti <giometti@enneenne.com>,
Lukas Senger <lukas@fridolin.com>
Subject: [PATCH v18 3/3] pps: pps-gpio PPS ECHO implementation
Date: Sun, 24 Mar 2019 15:33:05 +1100 [thread overview]
Message-ID: <20190324043305.6627-4-tom@aussec.com> (raw)
In-Reply-To: <20190324043305.6627-3-tom@aussec.com>
This patch implements the PPS ECHO functionality for pps-gpio, that
sysfs claims is available already.
Configuration is done via device tree bindings.
No changes are made to userspace interfaces.
This patch was originally written by Lukas Senger as part of a masters
thesis project and modified for inclusion into the linux kernel by Tom
Burkart.
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Lukas Senger <lukas@fridolin.com>
Signed-off-by: Tom Burkart <tom@aussec.com>
---
drivers/pps/clients/pps-gpio.c | 88 ++++++++++++++++++++++++++++++++++++++++--
include/linux/pps-gpio.h | 2 +
2 files changed, 87 insertions(+), 3 deletions(-)
diff --git a/drivers/pps/clients/pps-gpio.c b/drivers/pps/clients/pps-gpio.c
index 4e5e9229814b..4b6418039387 100644
--- a/drivers/pps/clients/pps-gpio.c
+++ b/drivers/pps/clients/pps-gpio.c
@@ -35,6 +35,8 @@
#include <linux/list.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
/* Info for each registered platform device */
struct pps_gpio_device_data {
@@ -42,8 +44,12 @@ struct pps_gpio_device_data {
struct pps_device *pps; /* PPS source device */
struct pps_source_info info; /* PPS source information */
struct gpio_desc *gpio_pin; /* GPIO port descriptors */
+ struct gpio_desc *echo_pin;
+ struct timer_list echo_timer; /* timer to reset echo active state */
bool assert_falling_edge;
bool capture_clear;
+ unsigned int echo_active_ms; /* PPS echo active duration */
+ unsigned long echo_timeout; /* timer timeout value in jiffies */
};
/*
@@ -64,19 +70,56 @@ static irqreturn_t pps_gpio_irq_handler(int irq, void *data)
rising_edge = gpiod_get_value(info->gpio_pin);
if ((rising_edge && !info->assert_falling_edge) ||
(!rising_edge && info->assert_falling_edge))
- pps_event(info->pps, &ts, PPS_CAPTUREASSERT, NULL);
+ pps_event(info->pps, &ts, PPS_CAPTUREASSERT, data);
else if (info->capture_clear &&
((rising_edge && info->assert_falling_edge) ||
(!rising_edge && !info->assert_falling_edge)))
- pps_event(info->pps, &ts, PPS_CAPTURECLEAR, NULL);
+ pps_event(info->pps, &ts, PPS_CAPTURECLEAR, data);
return IRQ_HANDLED;
}
+/* This function will only be called when an ECHO GPIO is defined */
+static void pps_gpio_echo(struct pps_device *pps, int event, void *data)
+{
+ /* add_timer() needs to write into info->echo_timer */
+ struct pps_gpio_device_data *info = data;
+
+ switch (event) {
+ case PPS_CAPTUREASSERT:
+ if (pps->params.mode & PPS_ECHOASSERT)
+ gpiod_set_value(info->echo_pin, 1);
+ break;
+
+ case PPS_CAPTURECLEAR:
+ if (pps->params.mode & PPS_ECHOCLEAR)
+ gpiod_set_value(info->echo_pin, 1);
+ break;
+ }
+
+ /* fire the timer */
+ if (info->pps->params.mode & (PPS_ECHOASSERT | PPS_ECHOCLEAR)) {
+ info->echo_timer.expires = jiffies + info->echo_timeout;
+ add_timer(&info->echo_timer);
+ }
+}
+
+/* Timer callback to reset the echo pin to the inactive state */
+static void pps_gpio_echo_timer_callback(struct timer_list *t)
+{
+ const struct pps_gpio_device_data *info;
+
+ info = from_timer(info, t, echo_timer);
+
+ gpiod_set_value(info->echo_pin, 0);
+}
+
static int pps_gpio_setup(struct platform_device *pdev)
{
struct pps_gpio_device_data *data = platform_get_drvdata(pdev);
struct device_node *np = pdev->dev.of_node;
+ int ret;
+ u32 value;
data->gpio_pin = devm_gpiod_get(&pdev->dev,
NULL, /* request "gpios" */
@@ -87,6 +130,33 @@ static int pps_gpio_setup(struct platform_device *pdev)
return PTR_ERR(data->gpio_pin);
}
+ data->echo_pin = devm_gpiod_get_optional(&pdev->dev,
+ "echo",
+ GPIOD_OUT_LOW);
+ if (data->echo_pin) {
+ if (IS_ERR(data->echo_pin)) {
+ dev_err(&pdev->dev, "failed to request ECHO GPIO\n");
+ return PTR_ERR(data->echo_pin);
+ }
+
+ ret = of_property_read_u32(np,
+ "echo-active-ms",
+ &value);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed to get echo-active-ms from OF\n");
+ return ret;
+ }
+ data->echo_active_ms = value;
+ /* sanity check on echo_active_ms */
+ if (!data->echo_active_ms || data->echo_active_ms > 999) {
+ dev_err(&pdev->dev,
+ "echo-active-ms: %u - bad value from OF\n",
+ data->echo_active_ms);
+ return -EINVAL;
+ }
+ }
+
if (of_property_read_bool(np, "assert-falling-edge"))
data->assert_falling_edge = true;
return 0;
@@ -122,9 +192,11 @@ static int pps_gpio_probe(struct platform_device *pdev)
/* GPIO setup */
if (pdata) {
data->gpio_pin = pdata->gpio_pin;
+ data->echo_pin = pdata->echo_pin;
data->assert_falling_edge = pdata->assert_falling_edge;
data->capture_clear = pdata->capture_clear;
+ data->echo_active_ms = pdata->echo_active_ms;
} else {
ret = pps_gpio_setup(pdev);
if (ret)
@@ -148,6 +220,11 @@ static int pps_gpio_probe(struct platform_device *pdev)
data->info.owner = THIS_MODULE;
snprintf(data->info.name, PPS_MAX_NAME_LEN - 1, "%s.%d",
pdev->name, pdev->id);
+ if (data->echo_pin) {
+ data->info.echo = pps_gpio_echo;
+ data->echo_timeout = msecs_to_jiffies(data->echo_active_ms);
+ timer_setup(&data->echo_timer, pps_gpio_echo_timer_callback, 0);
+ }
/* register PPS source */
pps_default_params = PPS_CAPTUREASSERT | PPS_OFFSETASSERT;
@@ -180,6 +257,11 @@ static int pps_gpio_remove(struct platform_device *pdev)
struct pps_gpio_device_data *data = platform_get_drvdata(pdev);
pps_unregister_source(data->pps);
+ if (data->echo_pin) {
+ del_timer_sync(&data->echo_timer);
+ /* reset echo pin in any case */
+ gpiod_set_value(data->echo_pin, 0);
+ }
dev_info(&pdev->dev, "removed IRQ %d as PPS source\n", data->irq);
return 0;
}
@@ -204,4 +286,4 @@ MODULE_AUTHOR("Ricardo Martins <rasm@fe.up.pt>");
MODULE_AUTHOR("James Nuss <jamesnuss@nanometrics.ca>");
MODULE_DESCRIPTION("Use GPIO pin as PPS source");
MODULE_LICENSE("GPL");
-MODULE_VERSION("1.1.0");
+MODULE_VERSION("1.2.0");
diff --git a/include/linux/pps-gpio.h b/include/linux/pps-gpio.h
index f028d2cda6f5..44171e6b7197 100644
--- a/include/linux/pps-gpio.h
+++ b/include/linux/pps-gpio.h
@@ -24,8 +24,10 @@
struct pps_gpio_platform_data {
struct gpio_desc *gpio_pin;
+ struct gpio_desc *echo_pin;
bool assert_falling_edge;
bool capture_clear;
+ unsigned int echo_active_ms;
};
#endif /* _PPS_GPIO_H */
--
2.12.3
prev parent reply other threads:[~2019-03-24 4:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20190321154633.b9d1a356a100a4a14fa219f7@linux-foundation.org>
2019-03-24 4:33 ` [PATCH v18 0/3] PPS: pps-gpio PPS ECHO implementation Tom Burkart
2019-03-24 4:33 ` [PATCH v18 1/3] pps: descriptor-based gpio Tom Burkart
2019-03-24 4:33 ` [PATCH v18 2/3] dt-bindings: pps: pps-gpio PPS ECHO implementation Tom Burkart
2019-03-24 4:33 ` Tom Burkart [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190324043305.6627-4-tom@aussec.com \
--to=tom@aussec.com \
--cc=akpm@linux-foundation.org \
--cc=giometti@enneenne.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lukas@fridolin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox