The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Daniel Vetter <daniel@ffwll.ch>
To: Benoit Parrot <bparrot@ti.com>
Cc: Rob Clark <robdclark@gmail.com>,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	Boris Brezillon <boris.brezillon@bootlin.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Tomi Valkeinen <tomi.valkeinen@ti.com>,
	Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Jyri Sarha <jsarha@ti.com>
Subject: Re: [Patch 1/1] drm/atomic: integrate private objects with suspend/resume helpers
Date: Mon, 25 Mar 2019 10:06:41 +0100	[thread overview]
Message-ID: <20190325090641.GF2665@phenom.ffwll.local> (raw)
In-Reply-To: <20190315115607.v4avbfbp3hyytsl6@ti.com>

On Fri, Mar 15, 2019 at 06:56:07AM -0500, Benoit Parrot wrote:
> Daniel Vetter <daniel@ffwll.ch> wrote on Fri [2019-Mar-15 11:50:57 +0100]:
> > On Thu, Mar 14, 2019 at 08:44:45AM -0500, Benoit Parrot wrote:
> > > During a suspend cycle the atomic state is saved to be used during the
> > > restore cycle.
> > > 
> > > However the current state duplication logic does not duplicate private
> > > objects. This leads to state inconsistencies at resume time.
> > > 
> > > With private objects modeset lock now integrated, we can make sure that
> > > private object state are properly saved and restored.
> > > 
> > > Signed-off-by: Benoit Parrot <bparrot@ti.com>
> > 
> > Why do you need this? We're doing a full atomic_check, and your
> > atomic_check should be pulling in any private state objects and
> > recomputing their states. This smells like papering over a driver bug.
> 
> I have not seen any atomic_check called during the suspend duplicate
> helper. And you are correct normally the private_object state in my case
> would get pulled in during a plane atomic_check but that does not happen
> here in this step.

Yeah duplicating in suspend won't call atomic_check. Restoring the
duplicated state on resume will (or there's going to be lots of broken
drivers).

> Why wouldn't we save all the "state" artifacts so that the whole atomic
> state is consistent?

It's not needed, and might possible paper over driver bugs ...

> > The duplicate helpers should only need to duplicate the uapi-relevant
> > states, i.e. connector/crtc/planes.

... because of this reason. If your driver can't recompute the private
state from just the duplicated uapi-relevant states it's broken. Because
essentially the exact same thing might happen through the atomic ioctl
from userspace.

Hence my question: Why do you need this?
-Daniel

> > -Daniel
> > 
> > > ---
> > >  drivers/gpu/drm/drm_atomic_helper.c | 16 ++++++++++++++++
> > >  1 file changed, 16 insertions(+)
> > > 
> > > diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
> > > index 540a77a2ade9..b108021cc092 100644
> > > --- a/drivers/gpu/drm/drm_atomic_helper.c
> > > +++ b/drivers/gpu/drm/drm_atomic_helper.c
> > > @@ -3189,6 +3189,7 @@ drm_atomic_helper_duplicate_state(struct drm_device *dev,
> > >  	struct drm_connector_list_iter conn_iter;
> > >  	struct drm_plane *plane;
> > >  	struct drm_crtc *crtc;
> > > +	struct drm_private_obj *privobj;
> > >  	int err = 0;
> > >  
> > >  	state = drm_atomic_state_alloc(dev);
> > > @@ -3218,6 +3219,16 @@ drm_atomic_helper_duplicate_state(struct drm_device *dev,
> > >  		}
> > >  	}
> > >  
> > > +	drm_for_each_privobj(privobj, dev) {
> > > +		struct drm_private_state *priv_state;
> > > +
> > > +		priv_state = drm_atomic_get_private_obj_state(state, privobj);
> > > +		if (IS_ERR(priv_state)) {
> > > +			err = PTR_ERR(priv_state);
> > > +			goto free;
> > > +		}
> > > +	}
> > > +
> > >  	drm_connector_list_iter_begin(dev, &conn_iter);
> > >  	drm_for_each_connector_iter(conn, &conn_iter) {
> > >  		struct drm_connector_state *conn_state;
> > > @@ -3325,12 +3336,17 @@ int drm_atomic_helper_commit_duplicated_state(struct drm_atomic_state *state,
> > >  	struct drm_connector_state *new_conn_state;
> > >  	struct drm_crtc *crtc;
> > >  	struct drm_crtc_state *new_crtc_state;
> > > +	struct drm_private_obj *privobj;
> > > +	struct drm_private_state *new_priv_state;
> > >  
> > >  	state->acquire_ctx = ctx;
> > >  
> > >  	for_each_new_plane_in_state(state, plane, new_plane_state, i)
> > >  		state->planes[i].old_state = plane->state;
> > >  
> > > +	for_each_new_private_obj_in_state(state, privobj, new_priv_state, i)
> > > +		state->private_objs[i].old_state = privobj->state;
> > > +
> > >  	for_each_new_crtc_in_state(state, crtc, new_crtc_state, i)
> > >  		state->crtcs[i].old_state = crtc->state;
> > >  
> > > -- 
> > > 2.17.1
> > > 
> > 
> > -- 
> > Daniel Vetter
> > Software Engineer, Intel Corporation
> > http://blog.ffwll.ch
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

      reply	other threads:[~2019-03-25  9:06 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-14 13:44 [Patch 1/1] drm/atomic: integrate private objects with suspend/resume helpers Benoit Parrot
2019-03-14 15:31 ` Ville Syrjälä
2019-03-14 15:54   ` Benoit Parrot
2019-03-14 18:19 ` Laurent Pinchart
2019-03-15 10:50 ` Daniel Vetter
2019-03-15 11:56   ` Benoit Parrot
2019-03-25  9:06     ` Daniel Vetter [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190325090641.GF2665@phenom.ffwll.local \
    --to=daniel@ffwll.ch \
    --cc=boris.brezillon@bootlin.com \
    --cc=bparrot@ti.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jsarha@ti.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peter.ujfalusi@ti.com \
    --cc=robdclark@gmail.com \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox