[PATCH AUTOSEL 3.18 09/41] dm thin: add sanity checks to thin-pool and external snapshot creation

[Sasha Levin <sashal@kernel.org>]

From: "Jason Cai (Xiang Feng)" <jason.cai.kern@gmail.com>

[ Upstream commit 70de2cbda8a5d788284469e755f8b097d339c240 ]

Invoking dm_get_device() twice on the same device path with different
modes is dangerous.  Because in that case, upgrade_mode() will alloc a
new 'dm_dev' and free the old one, which may be referenced by a previous
caller.  Dereferencing the dangling pointer will trigger kernel NULL
pointer dereference.

The following two cases can reproduce this issue.  Actually, they are
invalid setups that must be disallowed, e.g.:

1. Creating a thin-pool with read_only mode, and the same device as
both metadata and data.

dmsetup create thinp --table \
    "0 41943040 thin-pool /dev/vdb /dev/vdb 128 0 1 read_only"

BUG: unable to handle kernel NULL pointer dereference at 0000000000000080
...
Call Trace:
 new_read+0xfb/0x110 [dm_bufio]
 dm_bm_read_lock+0x43/0x190 [dm_persistent_data]
 ? kmem_cache_alloc_trace+0x15c/0x1e0
 __create_persistent_data_objects+0x65/0x3e0 [dm_thin_pool]
 dm_pool_metadata_open+0x8c/0xf0 [dm_thin_pool]
 pool_ctr.cold.79+0x213/0x913 [dm_thin_pool]
 ? realloc_argv+0x50/0x70 [dm_mod]
 dm_table_add_target+0x14e/0x330 [dm_mod]
 table_load+0x122/0x2e0 [dm_mod]
 ? dev_status+0x40/0x40 [dm_mod]
 ctl_ioctl+0x1aa/0x3e0 [dm_mod]
 dm_ctl_ioctl+0xa/0x10 [dm_mod]
 do_vfs_ioctl+0xa2/0x600
 ? handle_mm_fault+0xda/0x200
 ? __do_page_fault+0x26c/0x4f0
 ksys_ioctl+0x60/0x90
 __x64_sys_ioctl+0x16/0x20
 do_syscall_64+0x55/0x150
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

2. Creating a external snapshot using the same thin-pool device.

dmsetup create thinp --table \
    "0 41943040 thin-pool /dev/vdc /dev/vdb 128 0 2 ignore_discard"
dmsetup message /dev/mapper/thinp 0 "create_thin 0"
dmsetup create snap --table \
            "0 204800 thin /dev/mapper/thinp 0 /dev/mapper/thinp"

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
...
Call Trace:
? __alloc_pages_nodemask+0x13c/0x2e0
retrieve_status+0xa5/0x1f0 [dm_mod]
? dm_get_live_or_inactive_table.isra.7+0x20/0x20 [dm_mod]
 table_status+0x61/0xa0 [dm_mod]
 ctl_ioctl+0x1aa/0x3e0 [dm_mod]
 dm_ctl_ioctl+0xa/0x10 [dm_mod]
 do_vfs_ioctl+0xa2/0x600
 ksys_ioctl+0x60/0x90
 ? ksys_write+0x4f/0xb0
 __x64_sys_ioctl+0x16/0x20
 do_syscall_64+0x55/0x150
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Jason Cai (Xiang Feng) <jason.cai@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-thin.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c
index 936c57b57539..c50f144bdbcf 100644
--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -2560,6 +2560,13 @@ static int pool_ctr(struct dm_target *ti, unsigned argc, char **argv)
 	as.argc = argc;
 	as.argv = argv;
 
+	/* make sure metadata and data are different devices */
+	if (!strcmp(argv[0], argv[1])) {
+		ti->error = "Error setting metadata or data device";
+		r = -EINVAL;
+		goto out_unlock;
+	}
+
 	/*
 	 * Set default pool features.
 	 */
@@ -3386,6 +3393,12 @@ static int thin_ctr(struct dm_target *ti, unsigned argc, char **argv)
 	tc->sort_bio_list = RB_ROOT;
 
 	if (argc == 3) {
+		if (!strcmp(argv[0], argv[2])) {
+			ti->error = "Error setting origin device";
+			r = -EINVAL;
+			goto bad_origin_dev;
+		}
+
 		r = dm_get_device(ti, argv[2], FMODE_READ, &origin_dev);
 		if (r) {
 			ti->error = "Error opening origin device";
-- 
2.19.1