[PATCH v5 0/6]dt-bindings: Firmware node binding for ZynqMP core

Nava kishore Manne
2019-03-26T14:31:37Z

Base firmware node and clock child node binding are part of mainline kernel.
This patchset adds documentation to describe rest of the firmware child node bindings.

Complete firmware DT node example is shown below for ease of understanding:

firmware {
zynqmp_firmware: zynqmp-firmware {
compatible = "xlnx,zynqmp-firmware";
method = "smc";
#power-domain-cells = <1>;
#reset-cells = <1>;

zynqmp_clk: clock-controller {
#clock-cells = <1>;
compatible = "xlnx,zynqmp-clk";
clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <&gt_crx_ref_clk>;
clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk";
};

zynqmp_power: zynqmp-power {
compatible = "xlnx,zynqmp-power";
interrupts = <0 35 4>;
};

zynqmp_reset: reset-controller {
compatible = "xlnx,zynqmp-reset";
#reset-cells = <1>;
};

nvmem_firmware {
compatible = "xlnx,zynqmp-nvmem-fw";
#address-cells = <1>;
#size-cells = <1>;

/* Data cells */
soc_revision: soc_revision {
reg = <0x0 0x4>;
};
};

pinctrl0: pinctrl@ff180000 {
compatible = "xlnx,zynqmp-pinctrl";

pinctrl_uart1_default: uart1-default {
mux {
groups = "uart0_4_grp";
function = "uart0";
};

conf {
groups = "uart0_4_grp";
slew-rate = <SLEW_RATE_SLOW>;
io-standard = <IO_STANDARD_LVCMOS18>;
};

conf-rx {
pins = "MIO18";
bias-high-impedance;
};

conf-tx {
pins = "MIO19";
bias-disable;
schmitt-cmos = <PIN_INPUT_TYPE_CMOS>;
};
};
};

zynqmp_pcap: pcap {
compatible = "xlnx,zynqmp-pcap-fpga";
};
};
};

Nava kishore Manne (3):
dt-bindings: reset: Add bindings for ZynqMP reset driver
dt-bindings: nvmem: Add bindings for ZynqMP nvmem driver
dt-bindings: fpga: Add bindings for ZynqMP fpga driver

Rajan Vaja (3):
dt-bindings: power: Add ZynqMP power domain bindings
dt-bindings: soc: Add ZynqMP PM bindings
dt-bindings: pinctrl: Add ZynqMP pin controller bindings

.../bindings/fpga/xlnx,zynqmp-pcap-fpga.txt | 25 ++
.../bindings/nvmem/xlnx,zynqmp-nvmem.txt | 47 +++
.../bindings/pinctrl/xlnx,zynqmp-pinctrl.txt | 275 ++++++++++++++++++
.../power/reset/xlnx,zynqmp-power.txt | 25 ++
.../bindings/power/xlnx,zynqmp-genpd.txt | 34 +++
.../bindings/reset/xlnx,zynqmp-reset.txt | 52 ++++
include/dt-bindings/power/xlnx-zynqmp-power.h | 39 +++
.../dt-bindings/reset/xlnx-zynqmp-resets.h | 130 +++++++++
8 files changed, 627 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
create mode 100644 Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.txt
create mode 100644 Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
create mode 100644 Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt
create mode 100644 Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
create mode 100644 include/dt-bindings/power/xlnx-zynqmp-power.h
create mode 100644 include/dt-bindings/reset/xlnx-zynqmp-resets.h

--
2.18.0