From: Arnaldo Carvalho de Melo <acme@kernel.org>
To: Ingo Molnar <mingo@kernel.org>, Thomas Gleixner <tglx@linutronix.de>
Cc: Jiri Olsa <jolsa@kernel.org>, Namhyung Kim <namhyung@kernel.org>,
Clark Williams <williams@redhat.com>,
linux-kernel@vger.kernel.org, linux-perf-users@vger.kernel.org,
Andi Kleen <ak@linux.intel.com>, Kan Liang <kan.liang@intel.com>,
Arnaldo Carvalho de Melo <acme@redhat.com>
Subject: [PATCH 33/44] perf vendor events intel: Update BroadwellX events to v14
Date: Tue, 2 Apr 2019 13:05:38 -0300 [thread overview]
Message-ID: <20190402160549.13544-34-acme@kernel.org> (raw)
In-Reply-To: <20190402160549.13544-1-acme@kernel.org>
From: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lkml.kernel.org/r/20190315165219.GA21223@tassilo.jf.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
.../pmu-events/arch/x86/broadwellx/cache.json | 161 +++++++++---------
.../arch/x86/broadwellx/floating-point.json | 16 +-
.../arch/x86/broadwellx/memory.json | 148 ++++++++--------
.../arch/x86/broadwellx/pipeline.json | 50 +++---
4 files changed, 186 insertions(+), 189 deletions(-)
diff --git a/tools/perf/pmu-events/arch/x86/broadwellx/cache.json b/tools/perf/pmu-events/arch/x86/broadwellx/cache.json
index 141b1080429d..75a3098d5775 100644
--- a/tools/perf/pmu-events/arch/x86/broadwellx/cache.json
+++ b/tools/perf/pmu-events/arch/x86/broadwellx/cache.json
@@ -57,17 +57,17 @@
},
{
"EventCode": "0x24",
- "UMask": "0x41",
+ "UMask": "0xc1",
"BriefDescription": "Demand Data Read requests that hit L2 cache",
"Counter": "0,1,2,3",
"EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT",
- "PublicDescription": "This event counts the number of demand Data Read requests that hit L2 cache. Only not rejected loads are counted.",
+ "PublicDescription": "Counts the number of demand Data Read requests, initiated by load instructions, that hit L2 cache.",
"SampleAfterValue": "200003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x24",
- "UMask": "0x42",
+ "UMask": "0xc2",
"BriefDescription": "RFO requests that hit L2 cache.",
"Counter": "0,1,2,3",
"EventName": "L2_RQSTS.RFO_HIT",
@@ -76,7 +76,7 @@
},
{
"EventCode": "0x24",
- "UMask": "0x44",
+ "UMask": "0xc4",
"BriefDescription": "L2 cache hits when fetching instructions, code reads.",
"Counter": "0,1,2,3",
"EventName": "L2_RQSTS.CODE_RD_HIT",
@@ -85,7 +85,7 @@
},
{
"EventCode": "0x24",
- "UMask": "0x50",
+ "UMask": "0xd0",
"BriefDescription": "L2 prefetch requests that hit L2 cache",
"Counter": "0,1,2,3",
"EventName": "L2_RQSTS.L2_PF_HIT",
@@ -396,24 +396,24 @@
{
"EventCode": "0xD0",
"UMask": "0x11",
- "BriefDescription": "Retired load uops that miss the STLB. (Precise Event - PEBS)",
+ "BriefDescription": "Retired load uops that miss the STLB.",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_UOPS_RETIRED.STLB_MISS_LOADS",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts load uops with true STLB miss retired to the architected path. True STLB miss is an uop triggering page walk that gets completed without blocks, and later gets retired. This page walk can end up with or without a fault.",
+ "PublicDescription": "This event counts load uops with true STLB miss retired to the architected path. True STLB miss is an uop triggering page walk that gets completed without blocks, and later gets retired. This page walk can end up with or without a fault.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
{
"EventCode": "0xD0",
"UMask": "0x12",
- "BriefDescription": "Retired store uops that miss the STLB. (Precise Event - PEBS)",
+ "BriefDescription": "Retired store uops that miss the STLB.",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_UOPS_RETIRED.STLB_MISS_STORES",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts store uops true STLB miss retired to the architected path. True STLB miss is an uop triggering page walk that gets completed without blocks, and later gets retired. This page walk can end up with or without a fault.",
+ "PublicDescription": "This event counts store uops with true STLB miss retired to the architected path. True STLB miss is an uop triggering page walk that gets completed without blocks, and later gets retired. This page walk can end up with or without a fault.",
"SampleAfterValue": "100003",
"L1_Hit_Indication": "1",
"CounterHTOff": "0,1,2,3"
@@ -421,37 +421,37 @@
{
"EventCode": "0xD0",
"UMask": "0x21",
- "BriefDescription": "Retired load uops with locked access. (Precise Event - PEBS)",
+ "BriefDescription": "Retired load uops with locked access.",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_UOPS_RETIRED.LOCK_LOADS",
"Errata": "BDM35",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts load uops with locked access retired to the architected path.",
+ "PublicDescription": "This event counts load uops with locked access retired to the architected path.",
"SampleAfterValue": "100007",
"CounterHTOff": "0,1,2,3"
},
{
"EventCode": "0xD0",
"UMask": "0x41",
- "BriefDescription": "Retired load uops that split across a cacheline boundary.(Precise Event - PEBS)",
+ "BriefDescription": "Retired load uops that split across a cacheline boundary.",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_UOPS_RETIRED.SPLIT_LOADS",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts line-split load uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
+ "PublicDescription": "This event counts line-splitted load uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
{
"EventCode": "0xD0",
"UMask": "0x42",
- "BriefDescription": "Retired store uops that split across a cacheline boundary. (Precise Event - PEBS)",
+ "BriefDescription": "Retired store uops that split across a cacheline boundary.",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_UOPS_RETIRED.SPLIT_STORES",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts line-split store uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
+ "PublicDescription": "This event counts line-splitted store uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
"SampleAfterValue": "100003",
"L1_Hit_Indication": "1",
"CounterHTOff": "0,1,2,3"
@@ -459,24 +459,24 @@
{
"EventCode": "0xD0",
"UMask": "0x81",
- "BriefDescription": "All retired load uops. (Precise Event - PEBS)",
+ "BriefDescription": "All retired load uops.",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_UOPS_RETIRED.ALL_LOADS",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts load uops retired to the architected path with a filter on bits 0 and 1 applied.\nNote: This event ?ounts AVX-256bit load/store double-pump memory uops as a single uop at retirement. This event also counts SW prefetches.",
+ "PublicDescription": "This event counts load uops retired to the architected path with a filter on bits 0 and 1 applied.\nNote: This event counts AVX-256bit load/store double-pump memory uops as a single uop at retirement. This event also counts SW prefetches.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3"
},
{
"EventCode": "0xD0",
"UMask": "0x82",
- "BriefDescription": "Retired store uops that split across a cacheline boundary. (Precise Event - PEBS)",
+ "BriefDescription": "All retired store uops.",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_UOPS_RETIRED.ALL_STORES",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts store uops retired to the architected path with a filter on bits 0 and 1 applied.\nNote: This event ?ounts AVX-256bit load/store double-pump memory uops as a single uop at retirement.",
+ "PublicDescription": "This event counts store uops retired to the architected path with a filter on bits 0 and 1 applied.\nNote: This event counts AVX-256bit load/store double-pump memory uops as a single uop at retirement.",
"SampleAfterValue": "2000003",
"L1_Hit_Indication": "1",
"CounterHTOff": "0,1,2,3"
@@ -484,69 +484,69 @@
{
"EventCode": "0xD1",
"UMask": "0x1",
- "BriefDescription": "Retired load uops with L1 cache hits as data sources. (Precise Event - PEBS)",
+ "BriefDescription": "Retired load uops with L1 cache hits as data sources.",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_LOAD_UOPS_RETIRED.L1_HIT",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data source were hits in the nearest-level (L1) cache.\nNote: Only two data-sources of L1/FB are applicable for AVX-256bit even though the corresponding AVX load could be serviced by a deeper level in the memory hierarchy. Data source is reported for the Low-half load. This event also counts SW prefetches independent of the actual data source.",
+ "PublicDescription": "This event counts retired load uops which data sources were hits in the nearest-level (L1) cache.\nNote: Only two data-sources of L1/FB are applicable for AVX-256bit even though the corresponding AVX load could be serviced by a deeper level in the memory hierarchy. Data source is reported for the Low-half load. This event also counts SW prefetches independent of the actual data source.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3"
},
{
"EventCode": "0xD1",
"UMask": "0x2",
- "BriefDescription": "Retired load uops with L2 cache hits as data sources. (Precise Event - PEBS)",
+ "BriefDescription": "Retired load uops with L2 cache hits as data sources.",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_LOAD_UOPS_RETIRED.L2_HIT",
"Errata": "BDM35",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were hits in the mid-level (L2) cache.",
+ "PublicDescription": "This event counts retired load uops which data sources were hits in the mid-level (L2) cache.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
{
"EventCode": "0xD1",
"UMask": "0x4",
- "BriefDescription": "Hit in last-level (L3) cache. Excludes Unknown data-source. (Precise Event - PEBS)",
+ "BriefDescription": "Retired load uops which data sources were data hits in L3 without snoops required.",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_LOAD_UOPS_RETIRED.L3_HIT",
"Errata": "BDM100",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were data hits in the last-level (L3) cache without snoops required.",
+ "PublicDescription": "This event counts retired load uops which data sources were data hits in the last-level (L3) cache without snoops required.",
"SampleAfterValue": "50021",
"CounterHTOff": "0,1,2,3"
},
{
"EventCode": "0xD1",
"UMask": "0x8",
- "BriefDescription": "Retired load uops misses in L1 cache as data sources. Uses PEBS.",
+ "BriefDescription": "Retired load uops misses in L1 cache as data sources.",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_LOAD_UOPS_RETIRED.L1_MISS",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were misses in the nearest-level (L1) cache. Counting excludes unknown and UC data source.",
+ "PublicDescription": "This event counts retired load uops which data sources were misses in the nearest-level (L1) cache. Counting excludes unknown and UC data source.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
{
"EventCode": "0xD1",
"UMask": "0x10",
- "BriefDescription": "Retired load uops with L2 cache misses as data sources. Uses PEBS.",
+ "BriefDescription": "Miss in mid-level (L2) cache. Excludes Unknown data-source.",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_LOAD_UOPS_RETIRED.L2_MISS",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were misses in the mid-level (L2) cache. Counting excludes unknown and UC data source.",
+ "PublicDescription": "This event counts retired load uops which data sources were misses in the mid-level (L2) cache. Counting excludes unknown and UC data source.",
"SampleAfterValue": "50021",
"CounterHTOff": "0,1,2,3"
},
{
"EventCode": "0xD1",
"UMask": "0x20",
- "BriefDescription": "Miss in last-level (L3) cache. Excludes Unknown data-source. (Precise Event - PEBS).",
+ "BriefDescription": "Miss in last-level (L3) cache. Excludes Unknown data-source.",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
@@ -558,83 +558,84 @@
{
"EventCode": "0xD1",
"UMask": "0x40",
- "BriefDescription": "Retired load uops which data sources were load uops missed L1 but hit FB due to preceding miss to the same cache line with data not ready. (Precise Event - PEBS)",
+ "BriefDescription": "Retired load uops which data sources were load uops missed L1 but hit FB due to preceding miss to the same cache line with data not ready.",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_LOAD_UOPS_RETIRED.HIT_LFB",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were load uops missed L1 but hit a fill buffer due to a preceding miss to the same cache line with the data not ready.\nNote: Only two data-sources of L1/FB are applicable for AVX-256bit even though the corresponding AVX load could be serviced by a deeper level in the memory hierarchy. Data source is reported for the Low-half load.",
+ "PublicDescription": "This event counts retired load uops which data sources were load uops missed L1 but hit a fill buffer due to a preceding miss to the same cache line with the data not ready.\nNote: Only two data-sources of L1/FB are applicable for AVX-256bit even though the corresponding AVX load could be serviced by a deeper level in the memory hierarchy. Data source is reported for the Low-half load.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
{
"EventCode": "0xD2",
"UMask": "0x1",
- "BriefDescription": "Retired load uops which data sources were L3 hit and cross-core snoop missed in on-pkg core cache. (Precise Event - PEBS)",
+ "BriefDescription": "Retired load uops which data sources were L3 hit and cross-core snoop missed in on-pkg core cache.",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_MISS",
"Errata": "BDM100",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were L3 Hit and a cross-core snoop missed in the on-pkg core cache.",
+ "PublicDescription": "This event counts retired load uops which data sources were L3 Hit and a cross-core snoop missed in the on-pkg core cache.",
"SampleAfterValue": "20011",
"CounterHTOff": "0,1,2,3"
},
{
"EventCode": "0xD2",
"UMask": "0x2",
- "BriefDescription": "Retired load uops which data sources were L3 and cross-core snoop hits in on-pkg core cache. (Precise Event - PEBS)",
+ "BriefDescription": "Retired load uops which data sources were L3 and cross-core snoop hits in on-pkg core cache.",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_HIT",
"Errata": "BDM100",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were L3 hit and a cross-core snoop hit in the on-pkg core cache.",
+ "PublicDescription": "This event counts retired load uops which data sources were L3 hit and a cross-core snoop hit in the on-pkg core cache.",
"SampleAfterValue": "20011",
"CounterHTOff": "0,1,2,3"
},
{
"EventCode": "0xD2",
"UMask": "0x4",
- "BriefDescription": "Retired load uops which data sources were HitM responses from shared L3. (Precise Event - PEBS)",
+ "BriefDescription": "Retired load uops which data sources were HitM responses from shared L3.",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_HITM",
"Errata": "BDM100",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were HitM responses from a core on same socket (shared L3).",
+ "PublicDescription": "This event counts retired load uops which data sources were HitM responses from a core on same socket (shared L3).",
"SampleAfterValue": "20011",
"CounterHTOff": "0,1,2,3"
},
{
"EventCode": "0xD2",
"UMask": "0x8",
- "BriefDescription": "Retired load uops which data sources were hits in L3 without snoops required. (Precise Event - PEBS)",
+ "BriefDescription": "Retired load uops which data sources were hits in L3 without snoops required.",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_NONE",
"Errata": "BDM100",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were hits in the last-level (L3) cache without snoops required.",
+ "PublicDescription": "This event counts retired load uops which data sources were hits in the last-level (L3) cache without snoops required.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
{
"EventCode": "0xD3",
"UMask": "0x1",
+ "BriefDescription": "Data from local DRAM either Snoop not needed or Snoop Miss (RspI)",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_LOAD_UOPS_L3_MISS_RETIRED.LOCAL_DRAM",
"Errata": "BDE70, BDM100",
- "PublicDescription": "This event counts retired load uops where the data came from local DRAM. This does not include hardware prefetches. This is a precise event.",
+ "PublicDescription": "Retired load uop whose Data Source was: local DRAM either Snoop not needed or Snoop Miss (RspI).",
"SampleAfterValue": "100007",
"CounterHTOff": "0,1,2,3"
},
{
"EventCode": "0xD3",
"UMask": "0x4",
- "BriefDescription": "Retired load uop whose Data Source was: remote DRAM either Snoop not needed or Snoop Miss (RspI) (Precise Event)",
+ "BriefDescription": "Retired load uop whose Data Source was: remote DRAM either Snoop not needed or Snoop Miss (RspI)",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
@@ -646,7 +647,7 @@
{
"EventCode": "0xD3",
"UMask": "0x10",
- "BriefDescription": "Retired load uop whose Data Source was: Remote cache HITM (Precise Event)",
+ "BriefDescription": "Retired load uop whose Data Source was: Remote cache HITM",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
@@ -658,7 +659,7 @@
{
"EventCode": "0xD3",
"UMask": "0x20",
- "BriefDescription": "Retired load uop whose Data Source was: forwarded from remote cache (Precise Event)",
+ "BriefDescription": "Retired load uop whose Data Source was: forwarded from remote cache",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
@@ -810,12 +811,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all requests that hit in the L3",
- "MSRValue": "0x3f803c8fff",
+ "BriefDescription": "Counts all requests hit in the L3",
+ "MSRValue": "0x3F803C8FFF",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_REQUESTS.LLC_HIT.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all requests that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all requests hit in the L3",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -823,12 +824,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
- "MSRValue": "0x10003c07f7",
+ "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
+ "MSRValue": "0x10003C07F7",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_HIT.HITM_OTHER_CORE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -836,12 +837,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
- "MSRValue": "0x04003c07f7",
+ "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
+ "MSRValue": "0x04003C07F7",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -849,12 +850,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all demand & prefetch code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
- "MSRValue": "0x04003c0244",
+ "BriefDescription": "Counts all demand & prefetch code reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
+ "MSRValue": "0x04003C0244",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_CODE_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch code reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand & prefetch code reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -862,12 +863,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
- "MSRValue": "0x10003c0122",
+ "BriefDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
+ "MSRValue": "0x10003C0122",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.LLC_HIT.HITM_OTHER_CORE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -875,12 +876,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
- "MSRValue": "0x04003c0122",
+ "BriefDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
+ "MSRValue": "0x04003C0122",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.LLC_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -888,12 +889,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
- "MSRValue": "0x10003c0091",
+ "BriefDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
+ "MSRValue": "0x10003C0091",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_HIT.HITM_OTHER_CORE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -901,12 +902,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
- "MSRValue": "0x04003c0091",
+ "BriefDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
+ "MSRValue": "0x04003C0091",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -914,12 +915,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3",
- "MSRValue": "0x3f803c0200",
+ "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads hit in the L3",
+ "MSRValue": "0x3F803C0200",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_LLC_CODE_RD.LLC_HIT.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads hit in the L3",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -927,12 +928,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3",
- "MSRValue": "0x3f803c0100",
+ "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs hit in the L3",
+ "MSRValue": "0x3F803C0100",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_LLC_RFO.LLC_HIT.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs hit in the L3",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -940,12 +941,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
- "MSRValue": "0x10003c0002",
+ "BriefDescription": "Counts all demand data writes (RFOs) hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
+ "MSRValue": "0x10003C0002",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_HIT.HITM_OTHER_CORE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand data writes (RFOs) hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -953,12 +954,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3",
- "MSRValue": "0x3f803c0002",
+ "BriefDescription": "Counts all demand data writes (RFOs) hit in the L3",
+ "MSRValue": "0x3F803C0002",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_HIT.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand data writes (RFOs) hit in the L3",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
}
diff --git a/tools/perf/pmu-events/arch/x86/broadwellx/floating-point.json b/tools/perf/pmu-events/arch/x86/broadwellx/floating-point.json
index d7b9d9c9c518..ba0e0c4e74eb 100644
--- a/tools/perf/pmu-events/arch/x86/broadwellx/floating-point.json
+++ b/tools/perf/pmu-events/arch/x86/broadwellx/floating-point.json
@@ -42,7 +42,7 @@
{
"EventCode": "0xC7",
"UMask": "0x3",
- "BriefDescription": "Number of SSE/AVX computational scalar floating-point instructions retired. Applies to SSE* and AVX* scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RSQRT RCP SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
+ "BriefDescription": "Number of SSE/AVX computational scalar floating-point instructions retired. Applies to SSE* and AVX* scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RSQRT RCP SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element. (RSQRT for single precision?)",
"Counter": "0,1,2,3",
"EventName": "FP_ARITH_INST_RETIRED.SCALAR",
"SampleAfterValue": "2000003",
@@ -51,7 +51,7 @@
{
"EventCode": "0xC7",
"UMask": "0x4",
- "BriefDescription": "Number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired. Each count represents 2 computations. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
+ "BriefDescription": "Number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired. Each count represents 2 computations. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
"Counter": "0,1,2,3",
"EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE",
"SampleAfterValue": "2000003",
@@ -60,7 +60,7 @@
{
"EventCode": "0xC7",
"UMask": "0x8",
- "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired. Each count represents 4 computations. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
+ "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired. Each count represents 4 computations. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
"Counter": "0,1,2,3",
"EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE",
"SampleAfterValue": "2000003",
@@ -69,7 +69,7 @@
{
"EventCode": "0xC7",
"UMask": "0x10",
- "BriefDescription": "Number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired. Each count represents 4 computations. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
+ "BriefDescription": "Number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired. Each count represents 4 computations. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
"Counter": "0,1,2,3",
"EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE",
"SampleAfterValue": "2000003",
@@ -78,7 +78,7 @@
{
"EventCode": "0xC7",
"UMask": "0x15",
- "BriefDescription": "Number of SSE/AVX computational double precision floating-point instructions retired. Applies to SSE* and AVX*scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element. ?.",
+ "BriefDescription": "Number of SSE/AVX computational double precision floating-point instructions retired. Applies to SSE* and AVX*scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
"Counter": "0,1,2,3",
"EventName": "FP_ARITH_INST_RETIRED.DOUBLE",
"SampleAfterValue": "2000006",
@@ -87,7 +87,7 @@
{
"EventCode": "0xc7",
"UMask": "0x20",
- "BriefDescription": "Number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired. Each count represents 8 computations. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
+ "BriefDescription": "Number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired. Each count represents 8 computations. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
"Counter": "0,1,2,3",
"EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE",
"SampleAfterValue": "2000003",
@@ -96,7 +96,7 @@
{
"EventCode": "0xC7",
"UMask": "0x2a",
- "BriefDescription": "Number of SSE/AVX computational single precision floating-point instructions retired. Applies to SSE* and AVX*scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element. ?.",
+ "BriefDescription": "Number of SSE/AVX computational single precision floating-point instructions retired. Applies to SSE* and AVX*scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
"Counter": "0,1,2,3",
"EventName": "FP_ARITH_INST_RETIRED.SINGLE",
"SampleAfterValue": "2000005",
@@ -105,7 +105,7 @@
{
"EventCode": "0xC7",
"UMask": "0x3c",
- "BriefDescription": "Number of SSE/AVX computational packed floating-point instructions retired. Applies to SSE* and AVX*, packed, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RSQRT RCP SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
+ "BriefDescription": "Number of SSE/AVX computational packed floating-point instructions retired. Applies to SSE* and AVX*, packed, double and single precision floating-point: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element. (RSQRT for single-precision?)",
"Counter": "0,1,2,3",
"EventName": "FP_ARITH_INST_RETIRED.PACKED",
"SampleAfterValue": "2000004",
diff --git a/tools/perf/pmu-events/arch/x86/broadwellx/memory.json b/tools/perf/pmu-events/arch/x86/broadwellx/memory.json
index d79a5cfea44b..ecb413bb67ca 100644
--- a/tools/perf/pmu-events/arch/x86/broadwellx/memory.json
+++ b/tools/perf/pmu-events/arch/x86/broadwellx/memory.json
@@ -170,11 +170,11 @@
{
"EventCode": "0xc8",
"UMask": "0x4",
- "BriefDescription": "Number of times HLE abort was triggered (PEBS)",
+ "BriefDescription": "Number of times HLE abort was triggered",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "HLE_RETIRED.ABORTED",
- "PublicDescription": "Number of times HLE abort was triggered (PEBS).",
+ "PublicDescription": "Number of times HLE abort was triggered.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
@@ -251,11 +251,11 @@
{
"EventCode": "0xc9",
"UMask": "0x4",
- "BriefDescription": "Number of times RTM abort was triggered (PEBS)",
+ "BriefDescription": "Number of times RTM abort was triggered",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "RTM_RETIRED.ABORTED",
- "PublicDescription": "Number of times RTM abort was triggered (PEBS).",
+ "PublicDescription": "Number of times RTM abort was triggered .",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3"
},
@@ -312,14 +312,14 @@
{
"EventCode": "0xCD",
"UMask": "0x1",
- "BriefDescription": "Loads with latency value being above 4",
+ "BriefDescription": "Randomly selected loads with latency value being above 4",
"PEBS": "2",
"MSRValue": "0x4",
"Counter": "3",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_4",
"MSRIndex": "0x3F6",
"Errata": "BDM100, BDM35",
- "PublicDescription": "This event counts loads with latency value being above four.",
+ "PublicDescription": "Counts randomly selected loads with latency value being above four.",
"TakenAlone": "1",
"SampleAfterValue": "100003",
"CounterHTOff": "3"
@@ -327,14 +327,14 @@
{
"EventCode": "0xCD",
"UMask": "0x1",
- "BriefDescription": "Loads with latency value being above 8",
+ "BriefDescription": "Randomly selected loads with latency value being above 8",
"PEBS": "2",
"MSRValue": "0x8",
"Counter": "3",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_8",
"MSRIndex": "0x3F6",
"Errata": "BDM100, BDM35",
- "PublicDescription": "This event counts loads with latency value being above eight.",
+ "PublicDescription": "Counts randomly selected loads with latency value being above eight.",
"TakenAlone": "1",
"SampleAfterValue": "50021",
"CounterHTOff": "3"
@@ -342,14 +342,14 @@
{
"EventCode": "0xCD",
"UMask": "0x1",
- "BriefDescription": "Loads with latency value being above 16",
+ "BriefDescription": "Randomly selected loads with latency value being above 16",
"PEBS": "2",
"MSRValue": "0x10",
"Counter": "3",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_16",
"MSRIndex": "0x3F6",
"Errata": "BDM100, BDM35",
- "PublicDescription": "This event counts loads with latency value being above 16.",
+ "PublicDescription": "Counts randomly selected loads with latency value being above 16.",
"TakenAlone": "1",
"SampleAfterValue": "20011",
"CounterHTOff": "3"
@@ -357,14 +357,14 @@
{
"EventCode": "0xCD",
"UMask": "0x1",
- "BriefDescription": "Loads with latency value being above 32",
+ "BriefDescription": "Randomly selected loads with latency value being above 32",
"PEBS": "2",
"MSRValue": "0x20",
"Counter": "3",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_32",
"MSRIndex": "0x3F6",
"Errata": "BDM100, BDM35",
- "PublicDescription": "This event counts loads with latency value being above 32.",
+ "PublicDescription": "Counts randomly selected loads with latency value being above 32.",
"TakenAlone": "1",
"SampleAfterValue": "100007",
"CounterHTOff": "3"
@@ -372,14 +372,14 @@
{
"EventCode": "0xCD",
"UMask": "0x1",
- "BriefDescription": "Loads with latency value being above 64",
+ "BriefDescription": "Randomly selected loads with latency value being above 64",
"PEBS": "2",
"MSRValue": "0x40",
"Counter": "3",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_64",
"MSRIndex": "0x3F6",
"Errata": "BDM100, BDM35",
- "PublicDescription": "This event counts loads with latency value being above 64.",
+ "PublicDescription": "Counts randomly selected loads with latency value being above 64.",
"TakenAlone": "1",
"SampleAfterValue": "2003",
"CounterHTOff": "3"
@@ -387,14 +387,14 @@
{
"EventCode": "0xCD",
"UMask": "0x1",
- "BriefDescription": "Loads with latency value being above 128",
+ "BriefDescription": "Randomly selected loads with latency value being above 128",
"PEBS": "2",
"MSRValue": "0x80",
"Counter": "3",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_128",
"MSRIndex": "0x3F6",
"Errata": "BDM100, BDM35",
- "PublicDescription": "This event counts loads with latency value being above 128.",
+ "PublicDescription": "Counts randomly selected loads with latency value being above 128.",
"TakenAlone": "1",
"SampleAfterValue": "1009",
"CounterHTOff": "3"
@@ -402,14 +402,14 @@
{
"EventCode": "0xCD",
"UMask": "0x1",
- "BriefDescription": "Loads with latency value being above 256",
+ "BriefDescription": "Randomly selected loads with latency value being above 256",
"PEBS": "2",
"MSRValue": "0x100",
"Counter": "3",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_256",
"MSRIndex": "0x3F6",
"Errata": "BDM100, BDM35",
- "PublicDescription": "This event counts loads with latency value being above 256.",
+ "PublicDescription": "Counts randomly selected loads with latency value being above 256.",
"TakenAlone": "1",
"SampleAfterValue": "503",
"CounterHTOff": "3"
@@ -417,14 +417,14 @@
{
"EventCode": "0xCD",
"UMask": "0x1",
- "BriefDescription": "Loads with latency value being above 512",
+ "BriefDescription": "Randomly selected loads with latency value being above 512",
"PEBS": "2",
"MSRValue": "0x200",
"Counter": "3",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_512",
"MSRIndex": "0x3F6",
"Errata": "BDM100, BDM35",
- "PublicDescription": "This event counts loads with latency value being above 512.",
+ "PublicDescription": "Counts randomly selected loads with latency value being above 512.",
"TakenAlone": "1",
"SampleAfterValue": "101",
"CounterHTOff": "3"
@@ -433,12 +433,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all requests that miss in the L3",
- "MSRValue": "0x3fbfc08fff",
+ "BriefDescription": "Counts all requests miss in the L3",
+ "MSRValue": "0x3FBFC08FFF",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_REQUESTS.LLC_MISS.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all requests that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all requests miss in the L3",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -446,12 +446,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and clean or shared data is transferred from remote cache",
- "MSRValue": "0x087fc007f7",
+ "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) miss the L3 and clean or shared data is transferred from remote cache",
+ "MSRValue": "0x087FC007F7",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and clean or shared data is transferred from remote cache Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) miss the L3 and clean or shared data is transferred from remote cache",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -459,12 +459,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and the modified data is transferred from remote cache",
- "MSRValue": "0x103fc007f7",
+ "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) miss the L3 and the modified data is transferred from remote cache",
+ "MSRValue": "0x103FC007F7",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_MISS.REMOTE_HITM",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and the modified data is transferred from remote cache Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) miss the L3 and the modified data is transferred from remote cache",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -472,12 +472,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and the data is returned from remote dram",
- "MSRValue": "0x063bc007f7",
+ "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) miss the L3 and the data is returned from remote dram",
+ "MSRValue": "0x063BC007F7",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_MISS.REMOTE_DRAM",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and the data is returned from remote dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) miss the L3 and the data is returned from remote dram",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -485,12 +485,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and the data is returned from local dram",
- "MSRValue": "0x06040007f7",
+ "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) miss the L3 and the data is returned from local dram",
+ "MSRValue": "0x06040007F7",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_MISS.LOCAL_DRAM",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss the L3 and the data is returned from local dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) miss the L3 and the data is returned from local dram",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -498,12 +498,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss in the L3",
- "MSRValue": "0x3fbfc007f7",
+ "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) miss in the L3",
+ "MSRValue": "0x3FBFC007F7",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_MISS.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all data/code/rfo reads (demand & prefetch) miss in the L3",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -511,12 +511,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all demand & prefetch code reads that miss the L3 and the data is returned from local dram",
+ "BriefDescription": "Counts all demand & prefetch code reads miss the L3 and the data is returned from local dram",
"MSRValue": "0x0604000244",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_CODE_RD.LLC_MISS.LOCAL_DRAM",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch code reads that miss the L3 and the data is returned from local dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand & prefetch code reads miss the L3 and the data is returned from local dram",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -524,12 +524,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all demand & prefetch code reads that miss in the L3",
- "MSRValue": "0x3fbfc00244",
+ "BriefDescription": "Counts all demand & prefetch code reads miss in the L3",
+ "MSRValue": "0x3FBFC00244",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_CODE_RD.LLC_MISS.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch code reads that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand & prefetch code reads miss in the L3",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -537,12 +537,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from local dram",
+ "BriefDescription": "Counts all demand & prefetch RFOs miss the L3 and the data is returned from local dram",
"MSRValue": "0x0604000122",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.LLC_MISS.LOCAL_DRAM",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from local dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand & prefetch RFOs miss the L3 and the data is returned from local dram",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -550,12 +550,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all demand & prefetch RFOs that miss in the L3",
- "MSRValue": "0x3fbfc00122",
+ "BriefDescription": "Counts all demand & prefetch RFOs miss in the L3",
+ "MSRValue": "0x3FBFC00122",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.LLC_MISS.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch RFOs that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand & prefetch RFOs miss in the L3",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -563,12 +563,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and clean or shared data is transferred from remote cache",
- "MSRValue": "0x087fc00091",
+ "BriefDescription": "Counts all demand & prefetch data reads miss the L3 and clean or shared data is transferred from remote cache",
+ "MSRValue": "0x087FC00091",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and clean or shared data is transferred from remote cache Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand & prefetch data reads miss the L3 and clean or shared data is transferred from remote cache",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -576,12 +576,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and the modified data is transferred from remote cache",
- "MSRValue": "0x103fc00091",
+ "BriefDescription": "Counts all demand & prefetch data reads miss the L3 and the modified data is transferred from remote cache",
+ "MSRValue": "0x103FC00091",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_MISS.REMOTE_HITM",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and the modified data is transferred from remote cache Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand & prefetch data reads miss the L3 and the modified data is transferred from remote cache",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -589,12 +589,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from remote dram",
- "MSRValue": "0x063bc00091",
+ "BriefDescription": "Counts all demand & prefetch data reads miss the L3 and the data is returned from remote dram",
+ "MSRValue": "0x063BC00091",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_MISS.REMOTE_DRAM",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from remote dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand & prefetch data reads miss the L3 and the data is returned from remote dram",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -602,12 +602,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from local dram",
+ "BriefDescription": "Counts all demand & prefetch data reads miss the L3 and the data is returned from local dram",
"MSRValue": "0x0604000091",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_MISS.LOCAL_DRAM",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from local dram Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand & prefetch data reads miss the L3 and the data is returned from local dram",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -615,12 +615,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all demand & prefetch data reads that miss in the L3",
- "MSRValue": "0x3fbfc00091",
+ "BriefDescription": "Counts all demand & prefetch data reads miss in the L3",
+ "MSRValue": "0x3FBFC00091",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_MISS.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch data reads that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand & prefetch data reads miss in the L3",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -628,12 +628,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that miss in the L3",
- "MSRValue": "0x3fbfc00200",
+ "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads miss in the L3",
+ "MSRValue": "0x3FBFC00200",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_LLC_CODE_RD.LLC_MISS.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts prefetch (that bring data to LLC only) code reads miss in the L3",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -641,12 +641,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss in the L3",
- "MSRValue": "0x3fbfc00100",
+ "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs miss in the L3",
+ "MSRValue": "0x3FBFC00100",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_LLC_RFO.LLC_MISS.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs miss in the L3",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -654,12 +654,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all demand data writes (RFOs) that miss the L3 and the modified data is transferred from remote cache",
- "MSRValue": "0x103fc00002",
+ "BriefDescription": "Counts all demand data writes (RFOs) miss the L3 and the modified data is transferred from remote cache",
+ "MSRValue": "0x103FC00002",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_MISS.REMOTE_HITM",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand data writes (RFOs) that miss the L3 and the modified data is transferred from remote cache Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand data writes (RFOs) miss the L3 and the modified data is transferred from remote cache",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -667,12 +667,12 @@
"Offcore": "1",
"EventCode": "0xB7, 0xBB",
"UMask": "0x1",
- "BriefDescription": "Counts all demand data writes (RFOs) that miss in the L3",
- "MSRValue": "0x3fbfc00002",
+ "BriefDescription": "Counts all demand data writes (RFOs) miss in the L3",
+ "MSRValue": "0x3FBFC00002",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_MISS.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand data writes (RFOs) that miss in the L3 Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand data writes (RFOs) miss in the L3",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
}
diff --git a/tools/perf/pmu-events/arch/x86/broadwellx/pipeline.json b/tools/perf/pmu-events/arch/x86/broadwellx/pipeline.json
index 0d04bf9db000..c2f6932a5817 100644
--- a/tools/perf/pmu-events/arch/x86/broadwellx/pipeline.json
+++ b/tools/perf/pmu-events/arch/x86/broadwellx/pipeline.json
@@ -1,6 +1,5 @@
[
{
- "EventCode": "0x00",
"UMask": "0x1",
"BriefDescription": "Instructions retired from execution.",
"Counter": "Fixed counter 0",
@@ -10,7 +9,6 @@
"CounterHTOff": "Fixed counter 0"
},
{
- "EventCode": "0x00",
"UMask": "0x2",
"BriefDescription": "Core cycles when the thread is not in halt state",
"Counter": "Fixed counter 1",
@@ -20,7 +18,6 @@
"CounterHTOff": "Fixed counter 1"
},
{
- "EventCode": "0x00",
"UMask": "0x2",
"BriefDescription": "Core cycles when at least one thread on the physical core is not in halt state.",
"Counter": "Fixed counter 1",
@@ -30,7 +27,6 @@
"CounterHTOff": "Fixed counter 1"
},
{
- "EventCode": "0x00",
"UMask": "0x3",
"BriefDescription": "Reference cycles when the core is not in halt state.",
"Counter": "Fixed counter 2",
@@ -322,7 +318,7 @@
"BriefDescription": "Stalls caused by changing prefix length of the instruction.",
"Counter": "0,1,2,3",
"EventName": "ILD_STALL.LCP",
- "PublicDescription": "This event counts stalls occurred due to changing prefix length (66, 67 or REX.W when they change the length of the decoded instruction). Occurrences counting is proportional to the number of prefixes in a 16B-line. This may result in the following penalties: three-cycle penalty for each LCP in a 16-byte chunk.",
+ "PublicDescription": "This event counts stalls occured due to changing prefix length (66, 67 or REX.W when they change the length of the decoded instruction). Occurrences counting is proportional to the number of prefixes in a 16B-line. This may result in the following penalties: three-cycle penalty for each LCP in a 16-byte chunk.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
@@ -786,12 +782,12 @@
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
- "EventCode": "0xA2",
+ "EventCode": "0xa2",
"UMask": "0x1",
"BriefDescription": "Resource-related stall cycles",
"Counter": "0,1,2,3",
"EventName": "RESOURCE_STALLS.ANY",
- "PublicDescription": "This event counts resource-related stall cycles. Reasons for stalls can be as follows:\n - *any* u-arch structure got full (LB, SB, RS, ROB, BOB, LM, Physical Register Reclaim Table (PRRT), or Physical History Table (PHT) slots)\n - *any* u-arch structure got empty (like INT/SIMD FreeLists)\n - FPU control word (FPCW), MXCSR\nand others. This counts cycles that the pipeline backend blocked uop delivery from the front end.",
+ "PublicDescription": "This event counts resource-related stall cycles.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
@@ -1168,12 +1164,12 @@
{
"EventCode": "0xC2",
"UMask": "0x1",
- "BriefDescription": "Actually retired uops. (Precise Event - PEBS)",
+ "BriefDescription": "Actually retired uops.",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "UOPS_RETIRED.ALL",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts all actually retired uops. Counting increments by two for micro-fused uops, and by one for macro-fused and other uops. Maximal increment value for one cycle is eight.",
+ "PublicDescription": "This event counts all actually retired uops. Counting increments by two for micro-fused uops, and by one for macro-fused and other uops. Maximal increment value for one cycle is eight.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
@@ -1204,11 +1200,11 @@
{
"EventCode": "0xC2",
"UMask": "0x2",
- "BriefDescription": "Retirement slots used. (Precise Event - PEBS)",
+ "BriefDescription": "Retirement slots used.",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "UOPS_RETIRED.RETIRE_SLOTS",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts the number of retirement slots used.",
+ "PublicDescription": "This event counts the number of retirement slots used.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
@@ -1266,33 +1262,33 @@
{
"EventCode": "0xC4",
"UMask": "0x1",
- "BriefDescription": "Conditional branch instructions retired. (Precise Event - PEBS)",
+ "BriefDescription": "Conditional branch instructions retired.",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "BR_INST_RETIRED.CONDITIONAL",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts conditional branch instructions retired.",
+ "PublicDescription": "This event counts conditional branch instructions retired.",
"SampleAfterValue": "400009",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0xC4",
"UMask": "0x2",
- "BriefDescription": "Direct and indirect near call instructions retired. (Precise Event - PEBS)",
+ "BriefDescription": "Direct and indirect near call instructions retired.",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "BR_INST_RETIRED.NEAR_CALL",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts both direct and indirect near call instructions retired.",
+ "PublicDescription": "This event counts both direct and indirect near call instructions retired.",
"SampleAfterValue": "100007",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0xC4",
"UMask": "0x2",
- "BriefDescription": "Direct and indirect macro near call instructions retired (captured in ring 3). (Precise Event - PEBS)",
+ "BriefDescription": "Direct and indirect macro near call instructions retired (captured in ring 3).",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "BR_INST_RETIRED.NEAR_CALL_R3",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts both direct and indirect macro near call instructions retired (captured in ring 3).",
+ "PublicDescription": "This event counts both direct and indirect macro near call instructions retired (captured in ring 3).",
"SampleAfterValue": "100007",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
@@ -1311,11 +1307,11 @@
{
"EventCode": "0xC4",
"UMask": "0x8",
- "BriefDescription": "Return instructions retired. (Precise Event - PEBS)",
+ "BriefDescription": "Return instructions retired.",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "BR_INST_RETIRED.NEAR_RETURN",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts return instructions retired.",
+ "PublicDescription": "This event counts return instructions retired.",
"SampleAfterValue": "100007",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
@@ -1332,11 +1328,11 @@
{
"EventCode": "0xC4",
"UMask": "0x20",
- "BriefDescription": "Taken branch instructions retired. (Precise Event - PEBS)",
+ "BriefDescription": "Taken branch instructions retired.",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "BR_INST_RETIRED.NEAR_TAKEN",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts taken branch instructions retired.",
+ "PublicDescription": "This event counts taken branch instructions retired.",
"SampleAfterValue": "400009",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
@@ -1364,11 +1360,11 @@
{
"EventCode": "0xC5",
"UMask": "0x1",
- "BriefDescription": "Mispredicted conditional branch instructions retired. (Precise Event - PEBS)",
+ "BriefDescription": "Mispredicted conditional branch instructions retired.",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "BR_MISP_RETIRED.CONDITIONAL",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts mispredicted conditional branch instructions retired.",
+ "PublicDescription": "This event counts mispredicted conditional branch instructions retired.",
"SampleAfterValue": "400009",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
@@ -1386,22 +1382,22 @@
{
"EventCode": "0xC5",
"UMask": "0x8",
- "BriefDescription": "This event counts the number of mispredicted ret instructions retired.(Precise Event)",
+ "BriefDescription": "This event counts the number of mispredicted ret instructions retired. Non PEBS",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "BR_MISP_RETIRED.RET",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts mispredicted return instructions retired.",
+ "PublicDescription": "This event counts mispredicted return instructions retired.",
"SampleAfterValue": "100007",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0xC5",
"UMask": "0x20",
- "BriefDescription": "number of near branch instructions retired that were mispredicted and taken. (Precise Event - PEBS).",
+ "BriefDescription": "number of near branch instructions retired that were mispredicted and taken.",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "BR_MISP_RETIRED.NEAR_TAKEN",
- "PublicDescription": "Number of near branch instructions retired that were mispredicted and taken. (Precise Event - PEBS).",
+ "PublicDescription": "Number of near branch instructions retired that were mispredicted and taken.",
"SampleAfterValue": "400009",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
--
2.20.1
next prev parent reply other threads:[~2019-04-02 16:08 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-02 16:05 [GIT PULL 00/44] perf/core improvements and fixes for 5.2 Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 01/44] perf trace: Add 'string' event alias to select syscalls with string args Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 02/44] perf augmented_raw_syscalls: Copy strings from all syscalls with 1st or 2nd string arg Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 03/44] perf augmented_raw_syscalls: Use a PERCPU_ARRAY map to copy more string bytes Arnaldo Carvalho de Melo
2019-04-02 16:44 ` Andrii Nakryiko
2019-04-02 16:05 ` [PATCH 04/44] perf trace beauty renameat: No need to include linux/fs.h Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 05/44] perf tools: Add header defining used namespace struct to event.h Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 06/44] perf list: Fix s390 counter long description for L1D_RO_EXCL_WRITES Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 07/44] perf stat: Revert checks for duration_time Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 08/44] perf stat: Implement duration_time as a proper event Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 09/44] perf evsel: Support printing evsel name for 'duration_time' Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 10/44] perf list: Output tool events Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 11/44] tools lib traceevent: Handle trace_printk() "%px" Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 12/44] tools lib traceevent: Add mono clocks to be parsed in seconds Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 13/44] tools lib traceevent: Implement a new API, tep_list_events_copy() Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 14/44] tools lib traceevent: Add more debugging to see various internal ring buffer entries Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 15/44] tools lib traceevent: Change description of few APIs Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 16/44] tools lib traceevent: Coding style fixes Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 17/44] tools lib traceevent: Implement new traceevent APIs for accessing struct tep_handler fields Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 18/44] tools lib traceevent: Removed unneeded !! and return parenthesis Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 19/44] tools lib traceevent: Remove tep filter trivial APIs Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 20/44] tools lib traceevent: Remove call to exit() from tep_filter_add_filter_str() Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 21/44] tools tools, tools lib traceevent: Make traceevent APIs more consistent Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 22/44] tools lib traceevent: Rename input arguments of libtraceevent APIs from pevent to tep Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 23/44] perf tools, tools lib traceevent: Rename "pevent" member of struct tep_event to "tep" Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 24/44] perf tools, tools lib traceevent: Rename "pevent" member of struct tep_event_filter " Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 25/44] tools lib traceevent: Rename input arguments and local variables of libtraceevent from pevent to tep Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 26/44] tools build: Implement libzstd feature check, LIBZSTD_DIR and NO_LIBZSTD defines Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 27/44] perf record: Implement --mmap-flush=<number> option Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 28/44] perf vendor events intel: Update metrics from TMAM 3.5 Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 29/44] perf vendor events intel: Update Broadwell events to v23 Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 30/44] perf vendor events intel: Update Broadwell-DE events to v7 Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 31/44] perf vendor events intel: Update Skylake events to v42 Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 32/44] perf vendor events intel: Update SkylakeX events to v1.12 Arnaldo Carvalho de Melo
2019-04-02 16:05 ` Arnaldo Carvalho de Melo [this message]
2019-04-02 16:05 ` [PATCH 34/44] perf vendor events intel: Update HaswellX events to v20 Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 35/44] perf vendor events intel: Update IvyTown " Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 36/44] perf vendor events intel: Update JakeTown " Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 37/44] perf vendor events intel: Update SandyBridge events to v16 Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 38/44] perf vendor events intel: Update IvyBridge events to v21 Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 39/44] perf vendor events intel: Update Haswell events to v28 Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 40/44] perf vendor events intel: Update KnightsLanding events to v9 Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 41/44] perf vendor events intel: Update Bonnell to V4 Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 42/44] perf vendor events intel: Update Goldmont to v13 Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 43/44] perf vendor events intel: Update GoldmontPlus to v1.01 Arnaldo Carvalho de Melo
2019-04-02 16:05 ` [PATCH 44/44] perf vendor events intel: Update Silvermont to v14 Arnaldo Carvalho de Melo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190402160549.13544-34-acme@kernel.org \
--to=acme@kernel.org \
--cc=acme@redhat.com \
--cc=ak@linux.intel.com \
--cc=jolsa@kernel.org \
--cc=kan.liang@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-perf-users@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=namhyung@kernel.org \
--cc=tglx@linutronix.de \
--cc=williams@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox