From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Binbin Wu <binbin.wu@intel.com>
Cc: mika.westerberg@linux.intel.com, linux-kernel@vger.kernel.org,
linux-gpio@vger.kernel.org
Subject: Re: [PATCH] pinctrl: pinctrl-intel: move gpio suspend/resume to noirq phase
Date: Mon, 8 Apr 2019 15:43:48 +0300 [thread overview]
Message-ID: <20190408124348.GQ9224@smile.fi.intel.com> (raw)
In-Reply-To: <1554720566-29103-1-git-send-email-binbin.wu@intel.com>
On Mon, Apr 08, 2019 at 06:49:26PM +0800, Binbin Wu wrote:
> In current driver, SET_LATE_SYSTEM_SLEEP_PM_OPS is used to install the
> callbacks for suspend/resume.
> GPIO pin may be used as the interrupt pin by some device. However, using
> SET_LATE_SYSTEM_SLEEP_PM_OPS() to install the callbacks, the resume
> callback is called after resume_device_irqs(). Unintended interrupts may
> arrive due to resuming device irqs first, but the GPIO controller is not
> properly restored.
>
> Normally, for a SMP system, there are multiple cores, so even when there are
> unintended interrupts, BSP gets the chance to init the gpio chip soon.
gpio -> GPIO.
(If Mika is okay with patch content, I may fix this when applying)
> But when there is only 1 core is active (other cores are offlined or
> single core) during resume, it is more easily to observe the unintended
> interrupts.
>
> This patch renames the suspend/resume function by adding suffix "_noirq",
> and installs the callbacks using SET_NOIRQ_SYSTEM_SLEEP_PM_OPS().
>
> Signed-off-by: Binbin Wu <binbin.wu@intel.com>
> ---
> drivers/pinctrl/intel/pinctrl-intel.c | 8 ++++----
> drivers/pinctrl/intel/pinctrl-intel.h | 11 ++++++-----
> 2 files changed, 10 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c
> index 3b18181..70638b7 100644
> --- a/drivers/pinctrl/intel/pinctrl-intel.c
> +++ b/drivers/pinctrl/intel/pinctrl-intel.c
> @@ -1466,7 +1466,7 @@ static bool intel_pinctrl_should_save(struct intel_pinctrl *pctrl, unsigned int
> return false;
> }
>
> -int intel_pinctrl_suspend(struct device *dev)
> +int intel_pinctrl_suspend_noirq(struct device *dev)
> {
> struct intel_pinctrl *pctrl = dev_get_drvdata(dev);
> struct intel_community_context *communities;
> @@ -1505,7 +1505,7 @@ int intel_pinctrl_suspend(struct device *dev)
>
> return 0;
> }
> -EXPORT_SYMBOL_GPL(intel_pinctrl_suspend);
> +EXPORT_SYMBOL_GPL(intel_pinctrl_suspend_noirq);
>
> static void intel_gpio_irq_init(struct intel_pinctrl *pctrl)
> {
> @@ -1527,7 +1527,7 @@ static void intel_gpio_irq_init(struct intel_pinctrl *pctrl)
> }
> }
>
> -int intel_pinctrl_resume(struct device *dev)
> +int intel_pinctrl_resume_noirq(struct device *dev)
> {
> struct intel_pinctrl *pctrl = dev_get_drvdata(dev);
> const struct intel_community_context *communities;
> @@ -1589,7 +1589,7 @@ int intel_pinctrl_resume(struct device *dev)
>
> return 0;
> }
> -EXPORT_SYMBOL_GPL(intel_pinctrl_resume);
> +EXPORT_SYMBOL_GPL(intel_pinctrl_resume_noirq);
> #endif
>
> MODULE_AUTHOR("Mathias Nyman <mathias.nyman@linux.intel.com>");
> diff --git a/drivers/pinctrl/intel/pinctrl-intel.h b/drivers/pinctrl/intel/pinctrl-intel.h
> index b8a07d37..a8e958f 100644
> --- a/drivers/pinctrl/intel/pinctrl-intel.h
> +++ b/drivers/pinctrl/intel/pinctrl-intel.h
> @@ -177,13 +177,14 @@ int intel_pinctrl_probe_by_hid(struct platform_device *pdev);
> int intel_pinctrl_probe_by_uid(struct platform_device *pdev);
>
> #ifdef CONFIG_PM_SLEEP
> -int intel_pinctrl_suspend(struct device *dev);
> -int intel_pinctrl_resume(struct device *dev);
> +int intel_pinctrl_suspend_noirq(struct device *dev);
> +int intel_pinctrl_resume_noirq(struct device *dev);
> #endif
>
> -#define INTEL_PINCTRL_PM_OPS(_name) \
> -const struct dev_pm_ops _name = { \
> - SET_LATE_SYSTEM_SLEEP_PM_OPS(intel_pinctrl_suspend, intel_pinctrl_resume) \
> +#define INTEL_PINCTRL_PM_OPS(_name) \
> +const struct dev_pm_ops _name = { \
> + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(intel_pinctrl_suspend_noirq, \
> + intel_pinctrl_resume_noirq) \
> }
>
> #endif /* PINCTRL_INTEL_H */
> --
> 2.7.4
>
--
With Best Regards,
Andy Shevchenko
next prev parent reply other threads:[~2019-04-08 12:43 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-08 10:49 [PATCH] pinctrl: pinctrl-intel: move gpio suspend/resume to noirq phase Binbin Wu
2019-04-08 12:43 ` Andy Shevchenko [this message]
2019-04-08 12:51 ` Mika Westerberg
2019-04-09 15:28 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190408124348.GQ9224@smile.fi.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=binbin.wu@intel.com \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox