Re: [GIT PULL] PHY: For 5.1 -rc

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

On Wed, Apr 03, 2019 at 10:13:53AM +0530, Kishon Vijay Abraham I wrote:
> Hi Greg,
> 
> Please find the pull request for 5.1 -rc cycle below.
> 
> It fixes PHY programming sequence in phy-ti-pipe3 driver to align with
> TRM, requests IRQ only for OTG in phy-rcar-gen3-usb2 and a bunch of
> other linker errors and compilation warnings seen in randconfig.
> 
> Please see the complete list of changes in the tag message below and let
> me know if I have to make any modifications.
> 
> Thanks
> Kishon
> 
> The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:
> 
>   Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)
> 
> are available in the Git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git tags/phy-for-5.1-rc
> 
> for you to fetch changes up to d5d60c3f25ab52de7c5dfd31f584f190b754629e:
> 
>   phy: fix platform_no_drv_owner.cocci warnings (2019-04-03 10:02:20 +0530)
> 
> ----------------------------------------------------------------
> phy: for 5.1-rc
> 
>   *) Follow TRM sequence in phy-ti-pipe3 driver to ensure DPLL & PHY
>      operates correctly over the entire temperature range
>   *) Fix missing bit-wise 'OR' operator in ti-pipe3 driver
>   *) Fix to request IRQ only for OTG in phy-rcar-gen3-usb2 driver
>   *) Fix linker errors and compilation warnings got with randconfig
>   *) Fix sparse warnings and .cocci warnings
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> 
> ----------------------------------------------------------------
> Arnd Bergmann (3):
>       phy: allwinner: allow compile testing
>       phy: ti: usb2: fix OMAP_CONTROL_PHY dependency
>       phy: mapphone-mdm6600: add gpiolib dependency
> 
> Colin Ian King (1):
>       phy: ti-pipe3: fix missing bit-wise or operator when assigning val
> 
> Fabrizio Castro (1):
>       phy: renesas: rcar-gen3-usb2: No need to request IRQ for non-OTG
> 
> Roger Quadros (4):
>       phy: ti-pipe3: Introduce mode property in driver data
>       phy: ti-pipe3: improve DPLL stability for SATA & USB
>       phy: ti-pipe3: Fix SATA & USB PHY power up sequence
>       phy: ti-pipe3: Fix PCIe power up sequence
> 
> Tony Lindgren (1):
>       phy: phy-twl4030-usb: Fix cable state handling
> 
> YueHaibing (3):
>       phy: rockchip-typec: Make usb3_pll_cfg and dp_pll_cfg static
>       phy: qcom-ufs: Make ufs_qcom_phy_disable_iface_clk static
>       phy: fix platform_no_drv_owner.cocci warnings
> 
>  drivers/phy/allwinner/Kconfig              |   9 ++--
>  drivers/phy/marvell/phy-mvebu-a3700-utmi.c |   1 -
>  drivers/phy/motorola/Kconfig               |   2 +-
>  drivers/phy/qualcomm/phy-qcom-ufs.c        |   2 +-
>  drivers/phy/renesas/phy-rcar-gen3-usb2.c   |  27 ++++++------
>  drivers/phy/rockchip/phy-rockchip-typec.c  |   4 +-
>  drivers/phy/ti/Kconfig                     |   2 +-
>  drivers/phy/ti/phy-ti-pipe3.c              | 362 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------------------------

That's a lot of changes so late in the release cycle for one driver.
Are you sure those are not 5.2-rc1 things?

thanks,

greg k-h