[PATCH v2 4/7] dt-bindings: mfd: max77620: Add compatible for Maxim 77663

Dmitry Osipenko
2019-04-22T19:19:26Z

Maxim 77663 has a few minor differences in regards to hardware interface
and available capabilities by comparing it with 77620 and 20024 models,
hence re-use 77620 device-tree binding for the 77663.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
Documentation/devicetree/bindings/mfd/max77620.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mfd/max77620.txt b/Documentation/devicetree/bindings/mfd/max77620.txt
index 9c16d51cc15b..9058499051e0 100644
--- a/Documentation/devicetree/bindings/mfd/max77620.txt
+++ b/Documentation/devicetree/bindings/mfd/max77620.txt
@@ -4,7 +4,8 @@ Required properties:
-------------------
- compatible: Must be one of
"maxim,max77620"
- "maxim,max20024".
+ "maxim,max20024"
+ "maxim,max77663".
- reg: I2C device address.

Optional properties:
@@ -105,6 +106,7 @@ Optional properties:
Here supported time periods by device in microseconds are as follows:
MAX77620 supports 40, 80, 160, 320, 640, 1280, 2560 and 5120 microseconds.
MAX20024 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds.
+MAX77663 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds.

-maxim,power-ok-control: configure map power ok bit
1: Enables POK(Power OK) to control nRST_IO and GPIO1
--
2.21.0