From: Vignesh Raghavendra <vigneshr@ti.com>
To: Vignesh Raghavendra <vigneshr@ti.com>,
David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Boris Brezillon <bbrezillon@kernel.org>,
Marek Vasut <marek.vasut@gmail.com>,
Richard Weinberger <richard@nod.at>,
Rob Herring <robh+dt@kernel.org>
Cc: <linux-mtd@lists.infradead.org>,
Tudor Ambarus <Tudor.Ambarus@microchip.com>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Joakim Tjernlund <Joakim.Tjernlund@infinera.com>,
<devicetree@vger.kernel.org>,
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>,
Mason Yang <masonccyang@mxic.com.tw>,
<linux-arm-kernel@lists.infradead.org>, <nsekhar@ti.com>,
<linux-kernel@vger.kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Subject: [PATCH v4 4/5] dt-bindings: mtd: Add bindings for TI's AM654 HyperBus memory controller
Date: Tue, 23 Apr 2019 16:18:13 +0530 [thread overview]
Message-ID: <20190423104814.5762-5-vigneshr@ti.com> (raw)
In-Reply-To: <20190423104814.5762-1-vigneshr@ti.com>
Add binding documentation for TI's HyperBus memory controller present on
AM654 SoC.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
.../devicetree/bindings/mtd/ti,am654-hbmc.txt | 32 +++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 33 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt
diff --git a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt
new file mode 100644
index 000000000000..fc87c7918389
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt
@@ -0,0 +1,32 @@
+Bindings for HyperBus Memory Controller (HBMC) on TI's K3 family of SoCs
+
+Required properties:
+- compatible : "ti,am654-hbmc" for AM654 SoC
+- reg : Two entries:
+ First entry pointed to the register space of HBMC controller
+ Second entry pointing to the memory map region dedicated for
+ MMIO access to attached flash devices
+- ranges : Address range allocated for each chipselect in the MMIO space
+
+Optional properties:
+- mux-controls : phandle to the multiplexer that controls selection of
+ HBMC vs OSPI. Mux state of 1 indicates HBMC is selected.
+
+Example:
+
+ hbmc: hbmc@47034000 {
+ compatible = "ti,am654-hbmc";
+ reg = <0x0 0x47034000 0x0 0x100>,
+ <0x5 0x00000000 0x1 0x0000000>;
+ power-domains = <&k3_pds 55>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5 0x00000000 0x4000000>, /* CS0 - 64MB */
+ <0x1 0x5 0x04000000 0x4000000>; /* CS1 - 64MB
+
+ /* Slave flash node */
+ flash@0 {
+ compatible = "cypress,hyperflash";
+ reg = <0x0 0x4000000>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index a5f22f85c848..1ade81f9a32a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7258,6 +7258,7 @@ S: Supported
F: drivers/mtd/hyperbus/
F: include/linux/mtd/hyperbus.h
F: Documentation/devicetree/bindings/mtd/cypress,hyperflash.txt
+F: Documentation/devicetree/bindings/mtd/ti,am654-hbmc.txt
HYPERVISOR VIRTUAL CONSOLE DRIVER
L: linuxppc-dev@lists.ozlabs.org
--
2.21.0
next prev parent reply other threads:[~2019-04-23 10:49 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-23 10:48 [PATCH v4 0/5] MTD: Add Initial Hyperbus support Vignesh Raghavendra
2019-04-23 10:48 ` [PATCH v4 1/5] mtd: cfi_cmdset_0002: Add support for polling status register Vignesh Raghavendra
2019-04-27 19:02 ` Sergei Shtylyov
2019-04-23 10:48 ` [PATCH v4 2/5] dt-bindings: mtd: Add binding documentation for HyperFlash Vignesh Raghavendra
2019-04-26 20:10 ` Rob Herring
2019-04-23 10:48 ` [PATCH v4 3/5] mtd: Add support for HyperBus memory devices Vignesh Raghavendra
2019-04-23 10:48 ` Vignesh Raghavendra [this message]
2019-04-26 20:20 ` [PATCH v4 4/5] dt-bindings: mtd: Add bindings for TI's AM654 HyperBus memory controller Rob Herring
2019-04-27 3:01 ` Vignesh Raghavendra
2019-04-23 10:48 ` [PATCH v4 5/5] mtd: hyperbus: Add driver for TI's " Vignesh Raghavendra
2019-04-27 20:31 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190423104814.5762-5-vigneshr@ti.com \
--to=vigneshr@ti.com \
--cc=Joakim.Tjernlund@infinera.com \
--cc=Tudor.Ambarus@microchip.com \
--cc=bbrezillon@kernel.org \
--cc=computersforpeace@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=mark.rutland@arm.com \
--cc=masonccyang@mxic.com.tw \
--cc=miquel.raynal@bootlin.com \
--cc=nsekhar@ti.com \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
--cc=sergei.shtylyov@cogentembedded.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox