From: Bjorn Helgaas <helgaas@kernel.org>
To: Alex Williamson <alex.williamson@redhat.com>
Cc: mr.nuke.me@gmail.com, linux-pci@vger.kernel.org,
austin_bolen@dell.com, alex_gagniuc@dellteam.com,
keith.busch@intel.com, Shyam_Iyer@Dell.com, lukas@wunner.de,
okaya@kernel.org, torvalds@linux-foundation.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] PCI: Add link_change error handler and vfio-pci user
Date: Wed, 24 Apr 2019 12:57:58 -0500 [thread overview]
Message-ID: <20190424175758.GC244134@google.com> (raw)
In-Reply-To: <155605909349.3575.13433421148215616375.stgit@gimli.home>
On Tue, Apr 23, 2019 at 04:42:28PM -0600, Alex Williamson wrote:
> The PCIe bandwidth notification service generates logging any time a
> link changes speed or width to a state that is considered downgraded.
> Unfortunately, it cannot differentiate signal integrity related link
> changes from those intentionally initiated by an endpoint driver,
> including drivers that may live in userspace or VMs when making use
> of vfio-pci. Therefore, allow the driver to have a say in whether
> the link is indeed downgraded and worth noting in the log, or if the
> change is perhaps intentional.
>
> For vfio-pci, we don't know the intentions of the user/guest driver
> either, but we do know that GPU drivers in guests actively manage
> the link state and therefore trigger the bandwidth notification for
> what appear to be entirely intentional link changes.
>
> Fixes: e8303bb7a75c PCI/LINK: Report degraded links via link bandwidth notification
> Link: https://lore.kernel.org/linux-pci/155597243666.19387.1205950870601742062.stgit@gimli.home/T/#u
> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
> ---
>
> Changing to pci_dbg() logging is not super usable, so let's try the
> previous idea of letting the driver handle link change events as they
> see fit. Ideally this might be two patches, but for easier handling,
> folding the pci and vfio-pci bits together. Comments? Thanks,
I'm a little uneasy about the bandwidth notification logging as a
whole. Messages in dmesg don't seem like a solid base for building
management tools.
I assume the eventual goal would be some sort of digested notification
along the lines of "hey mr/ms administrator, the link to device X
unexpectedly became slower, you might want to check that out."
If I were building that, I don't think I would use dmesg. I might
write a daemon that polls /sys/.../current_link_{speed,width}, or
maybe use some sort of netlink event. Maybe it would be useful to
have the admin designate devices of interest.
I'm hesitant about adding a .link_change() handler. If there's
something useful a driver could do with it, that's one thing. But
using it merely to suppress a message doesn't really seem worth the
trouble, and it seems unfriendly to ask drivers to add it when they
didn't ask for it and get no benefit from it.
> drivers/pci/probe.c | 13 +++++++++++++
> drivers/vfio/pci/vfio_pci.c | 10 ++++++++++
> include/linux/pci.h | 3 +++
> 3 files changed, 26 insertions(+)
>
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index 7e12d0163863..233cd4b5b6e8 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -2403,6 +2403,19 @@ void pcie_report_downtraining(struct pci_dev *dev)
> if (PCI_FUNC(dev->devfn) != 0 || dev->is_virtfn)
> return;
>
> + /*
> + * If driver handles link_change event, defer to driver. PCIe drivers
> + * can call pcie_print_link_status() to print current link info.
> + */
> + device_lock(&dev->dev);
> + if (dev->driver && dev->driver->err_handler &&
> + dev->driver->err_handler->link_change) {
> + dev->driver->err_handler->link_change(dev);
> + device_unlock(&dev->dev);
> + return;
> + }
> + device_unlock(&dev->dev);
> +
> /* Print link status only if the device is constrained by the fabric */
> __pcie_print_link_status(dev, false);
> }
> diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
> index cab71da46f4a..c9ffc0ccabb3 100644
> --- a/drivers/vfio/pci/vfio_pci.c
> +++ b/drivers/vfio/pci/vfio_pci.c
> @@ -1418,8 +1418,18 @@ static pci_ers_result_t vfio_pci_aer_err_detected(struct pci_dev *pdev,
> return PCI_ERS_RESULT_CAN_RECOVER;
> }
>
> +/*
> + * Ignore link change notification, we can't differentiate signal related
> + * link changes from user driver power management type operations, so do
> + * nothing. Potentially this could be routed out to the user.
> + */
> +static void vfio_pci_link_change(struct pci_dev *pdev)
> +{
> +}
> +
> static const struct pci_error_handlers vfio_err_handlers = {
> .error_detected = vfio_pci_aer_err_detected,
> + .link_change = vfio_pci_link_change,
> };
>
> static struct pci_driver vfio_pci_driver = {
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 27854731afc4..e9194bc03f9e 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -763,6 +763,9 @@ struct pci_error_handlers {
>
> /* Device driver may resume normal operations */
> void (*resume)(struct pci_dev *dev);
> +
> + /* PCIe link change notification */
> + void (*link_change)(struct pci_dev *dev);
> };
>
>
>
next prev parent reply other threads:[~2019-04-24 17:58 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-23 22:42 [PATCH] PCI: Add link_change error handler and vfio-pci user Alex Williamson
2019-04-24 16:45 ` Alex_Gagniuc
2019-04-24 17:19 ` Alex Williamson
2019-04-24 17:35 ` Alex G
2019-04-24 17:57 ` Bjorn Helgaas [this message]
2019-04-29 14:51 ` Alex Williamson
2019-04-29 16:45 ` Sinan Kaya
2019-04-29 16:59 ` Alex Williamson
2019-04-30 17:59 ` Keith Busch
2019-04-29 17:43 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190424175758.GC244134@google.com \
--to=helgaas@kernel.org \
--cc=Shyam_Iyer@Dell.com \
--cc=alex.williamson@redhat.com \
--cc=alex_gagniuc@dellteam.com \
--cc=austin_bolen@dell.com \
--cc=keith.busch@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=mr.nuke.me@gmail.com \
--cc=okaya@kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox