Re: "iommu/amd: Set exclusion range correctly" causes smartpqi offline

[Joerg Roedel <jroedel@suse.de>]

On Fri, Apr 26, 2019 at 10:52:28AM -0400, Qian Cai wrote:
> Applying some memory pressure would causes smartpqi offline even in today's
> linux-next. This can always be reproduced by a LTP test cases [1] or sometimes
> just compiling kernels.
> 
> Reverting the commit "iommu/amd: Set exclusion range correctly" fixed the issue.
> 
> [  213.437112] smartpqi 0000:23:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT
> domain=0x0000 address=0x1000 flags=0x0000]
> [  213.447659] smartpqi 0000:23:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT
> domain=0x0000 address=0x1800 flags=0x0000]
> [  233.362013] smartpqi 0000:23:00.0: controller is offline: status code 0x14803
> [  233.369359] smartpqi 0000:23:00.0: controller offline
> [  233.388915] print_req_error: I/O error, dev sdb, sector 3317352 flags 2000001
> [  233.388921] sd 0:0:0:0: [sdb] tag#95 UNKNOWN(0x2003) Result: hostbyte=0x01
> driverbyte=0x00
> [  233.388931] sd 0:0:0:0: [sdb] tag#95 CDB: opcode=0x2a 2a 00 00 55 89 00 00 01
> 08 00
> [  233.389003] Write-error on swap-device (254:1:4474640)
> [  233.389015] Write-error on swap-device (254:1:2190776)
> [  233.389023] Write-error on swap-device (254:1:8351936)
> 
> [1] /opt/ltp/testcases/bin/mtest01 -p80 -w

I can't explain that, can you please boot with 'amd_iommu_dump' on the
kernel command line and send me dmesg after boot?

Thanks,

	Joerg