[PATCH v2] mmc: usdhi6rol0: mark expected switch fall-throughs

[PATCH v2] mmc: usdhi6rol0: mark expected switch fall-throughs

[Gustavo A. R. Silva]

In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

This patch fixes the following warnings:

In file included from drivers/mmc/host/usdhi6rol0.c:9:
drivers/mmc/host/usdhi6rol0.c: In function ‘usdhi6_timeout_work’:
./include/linux/device.h:1483:2: warning: this statement may fall through [-Wimplicit-fallthrough=]
  _dev_err(dev, dev_fmt(fmt), ##__VA_ARGS__)
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/mmc/host/usdhi6rol0.c:1689:3: note: in expansion of macro ‘dev_err’
   dev_err(mmc_dev(host->mmc), "Invalid state %u\n", host->wait);
   ^~~~~~~
drivers/mmc/host/usdhi6rol0.c:1691:2: note: here
  case USDHI6_WAIT_FOR_CMD:
  ^~~~
drivers/mmc/host/usdhi6rol0.c:1711:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   usdhi6_sg_unmap(host, true);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/mmc/host/usdhi6rol0.c:1716:2: note: here
  case USDHI6_WAIT_FOR_DATA_END:
  ^~~~
  CC [M]  drivers/isdn/hisax/hisax_isac.o
drivers/mmc/host/usdhi6rol0.c: In function ‘usdhi6_stop_cmd’:
drivers/mmc/host/usdhi6rol0.c:1338:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (mrq->stop->opcode == MMC_STOP_TRANSMISSION) {
      ^
drivers/mmc/host/usdhi6rol0.c:1343:2: note: here
  default:
  ^~~~~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
---
Changes in v2:
 - Turn multiple line comments into single line comments.
 - Fix additional fall-through warning.

 drivers/mmc/host/usdhi6rol0.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/mmc/host/usdhi6rol0.c b/drivers/mmc/host/usdhi6rol0.c
index cd8b1b9d4d8a..f0cc5e0dbf79 100644
--- a/drivers/mmc/host/usdhi6rol0.c
+++ b/drivers/mmc/host/usdhi6rol0.c
@@ -1339,7 +1339,7 @@ static int usdhi6_stop_cmd(struct usdhi6_host *host)
 			host->wait = USDHI6_WAIT_FOR_STOP;
 			return 0;
 		}
-		/* Unsupported STOP command */
+		/* fall through - Unsupported STOP command */
 	default:
 		dev_err(mmc_dev(host->mmc),
 			"unsupported stop CMD%d for CMD%d\n",
@@ -1687,7 +1687,7 @@ static void usdhi6_timeout_work(struct work_struct *work)
 	switch (host->wait) {
 	default:
 		dev_err(mmc_dev(host->mmc), "Invalid state %u\n", host->wait);
-		/* mrq can be NULL in this actually impossible case */
+		/* fall through - mrq can be NULL in this actually impossible case */
 	case USDHI6_WAIT_FOR_CMD:
 		usdhi6_error_code(host);
 		if (mrq)
@@ -1709,10 +1709,7 @@ static void usdhi6_timeout_work(struct work_struct *work)
 			host->offset, data->blocks, data->blksz, data->sg_len,
 			sg_dma_len(sg), sg->offset);
 		usdhi6_sg_unmap(host, true);
-		/*
-		 * If USDHI6_WAIT_FOR_DATA_END times out, we have already unmapped
-		 * the page
-		 */
+		/* fall through - If USDHI6_WAIT_FOR_DATA_END times out, we have already unmapped the page */
 	case USDHI6_WAIT_FOR_DATA_END:
 		usdhi6_error_code(host);
 		data->error = -ETIMEDOUT;
-- 
2.21.0

Re: [PATCH v2] mmc: usdhi6rol0: mark expected switch fall-throughs

[Ulf Hansson]

On Wed, 1 May 2019 at 22:36, Gustavo A. R. Silva <gustavo@embeddedor.com> wrote:
>
> In preparation to enabling -Wimplicit-fallthrough, mark switch
> cases where we are expecting to fall through.
>
> This patch fixes the following warnings:
>
> In file included from drivers/mmc/host/usdhi6rol0.c:9:
> drivers/mmc/host/usdhi6rol0.c: In function ‘usdhi6_timeout_work’:
> ./include/linux/device.h:1483:2: warning: this statement may fall through [-Wimplicit-fallthrough=]
>   _dev_err(dev, dev_fmt(fmt), ##__VA_ARGS__)
>   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/mmc/host/usdhi6rol0.c:1689:3: note: in expansion of macro ‘dev_err’
>    dev_err(mmc_dev(host->mmc), "Invalid state %u\n", host->wait);
>    ^~~~~~~
> drivers/mmc/host/usdhi6rol0.c:1691:2: note: here
>   case USDHI6_WAIT_FOR_CMD:
>   ^~~~
> drivers/mmc/host/usdhi6rol0.c:1711:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
>    usdhi6_sg_unmap(host, true);
>    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/mmc/host/usdhi6rol0.c:1716:2: note: here
>   case USDHI6_WAIT_FOR_DATA_END:
>   ^~~~
>   CC [M]  drivers/isdn/hisax/hisax_isac.o
> drivers/mmc/host/usdhi6rol0.c: In function ‘usdhi6_stop_cmd’:
> drivers/mmc/host/usdhi6rol0.c:1338:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
>    if (mrq->stop->opcode == MMC_STOP_TRANSMISSION) {
>       ^
> drivers/mmc/host/usdhi6rol0.c:1343:2: note: here
>   default:
>   ^~~~~~~
>
> Warning level 3 was used: -Wimplicit-fallthrough=3
>
> This patch is part of the ongoing efforts to enable
> -Wimplicit-fallthrough.
>
> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>

Applied for next, thanks!

I took the liberty to clean up the comments, avoiding to break 80
chars per line.

Kind regards
Uffe


> ---
> Changes in v2:
>  - Turn multiple line comments into single line comments.
>  - Fix additional fall-through warning.
>
>  drivers/mmc/host/usdhi6rol0.c | 9 +++------
>  1 file changed, 3 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/mmc/host/usdhi6rol0.c b/drivers/mmc/host/usdhi6rol0.c
> index cd8b1b9d4d8a..f0cc5e0dbf79 100644
> --- a/drivers/mmc/host/usdhi6rol0.c
> +++ b/drivers/mmc/host/usdhi6rol0.c
> @@ -1339,7 +1339,7 @@ static int usdhi6_stop_cmd(struct usdhi6_host *host)
>                         host->wait = USDHI6_WAIT_FOR_STOP;
>                         return 0;
>                 }
> -               /* Unsupported STOP command */
> +               /* fall through - Unsupported STOP command */
>         default:
>                 dev_err(mmc_dev(host->mmc),
>                         "unsupported stop CMD%d for CMD%d\n",
> @@ -1687,7 +1687,7 @@ static void usdhi6_timeout_work(struct work_struct *work)
>         switch (host->wait) {
>         default:
>                 dev_err(mmc_dev(host->mmc), "Invalid state %u\n", host->wait);
> -               /* mrq can be NULL in this actually impossible case */
> +               /* fall through - mrq can be NULL in this actually impossible case */
>         case USDHI6_WAIT_FOR_CMD:
>                 usdhi6_error_code(host);
>                 if (mrq)
> @@ -1709,10 +1709,7 @@ static void usdhi6_timeout_work(struct work_struct *work)
>                         host->offset, data->blocks, data->blksz, data->sg_len,
>                         sg_dma_len(sg), sg->offset);
>                 usdhi6_sg_unmap(host, true);
> -               /*
> -                * If USDHI6_WAIT_FOR_DATA_END times out, we have already unmapped
> -                * the page
> -                */
> +               /* fall through - If USDHI6_WAIT_FOR_DATA_END times out, we have already unmapped the page */
>         case USDHI6_WAIT_FOR_DATA_END:
>                 usdhi6_error_code(host);
>                 data->error = -ETIMEDOUT;
> --
> 2.21.0
>

Re: [PATCH v2] mmc: usdhi6rol0: mark expected switch fall-throughs

[Gustavo A. R. Silva]

On 5/3/19 8:29 AM, Ulf Hansson wrote:
> On Wed, 1 May 2019 at 22:36, Gustavo A. R. Silva <gustavo@embeddedor.com> wrote:
>>
>> In preparation to enabling -Wimplicit-fallthrough, mark switch
>> cases where we are expecting to fall through.
>>

[..]

>>
>> Warning level 3 was used: -Wimplicit-fallthrough=3
>>
>> This patch is part of the ongoing efforts to enable
>> -Wimplicit-fallthrough.
>>
>> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
> 
> Applied for next, thanks!
> 
> I took the liberty to clean up the comments, avoiding to break 80
> chars per line.
> 

Awesome. :)

Thanks, Uffe.
--
Gustavo