[RFC][PATCH 1/2 v2] ftrace/x86_32: Remove support for non DYNAMIC_FTRACE

[Steven Rostedt <rostedt@goodmis.org>]

From: "Steven Rostedt (VMware)" <rostedt@goodmis.org>

When DYNAMIC_FTRACE is enabled in the kernel, all the functions that can be
traced by the function tracer have a "nop" placeholder at the start of the
function. When function tracing is enabled, the nop is converted into a call
to the tracing infrastructure where the functions get traced. This also
allows for specifying specific functions to trace, and a lot of
infrastructure is built on top of this.

When DYNAMIC_FTRACE is not enabled, all the functions have a call to the
ftrace trampoline. A check is made to see if a function pointer is the
ftrace_stub or not, and if it is not, it calls the function pointer to trace
the code. This adds over 10% overhead to the kernel even when tracing is
disabled.

When an architecture supports DYNAMIC_FTRACE there really is no reason to
use the static tracing. I have kept non DYNAMIC_FTRACE available in x86 so
that the generic code for non DYNAMIC_FTRACE can be tested. There is no
reason to support non DYNAMIC_FTRACE for both x86_64 and x86_32. As the non
DYNAMIC_FTRACE for x86_32 does not even support fentry, and we want to
remove mcount completely, there's no reason to keep non DYNAMIC_FTRACE
around for x86_32.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
---
 arch/x86/Kconfig            | 11 +++++++++++
 arch/x86/kernel/ftrace_32.S | 39 -------------------------------------
 2 files changed, 11 insertions(+), 39 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 5ad92419be19..0544041ae3a2 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -31,6 +31,17 @@ config X86_64
 	select X86_DEV_DMA_OPS
 	select ARCH_HAS_SYSCALL_WRAPPER
 
+config FORCE_DYNAMIC_FTRACE
+	def_bool y
+	depends on X86_32
+	depends on FUNCTION_TRACER
+	select DYNAMIC_FTRACE
+	help
+	 We keep the static function tracing (!DYNAMIC_FTRACE) around
+	 in order to test the non static function tracing in the
+	 generic code, as other architectures still use it. But we
+	 only need to keep it around for x86_64. No need to keep it
+	 for x86_32. For x86_32, force DYNAMIC_FTRACE. 
 #
 # Arch settings
 #
diff --git a/arch/x86/kernel/ftrace_32.S b/arch/x86/kernel/ftrace_32.S
index 4c8440de3355..459e6b4a19bc 100644
--- a/arch/x86/kernel/ftrace_32.S
+++ b/arch/x86/kernel/ftrace_32.S
@@ -18,8 +18,6 @@ EXPORT_SYMBOL(__fentry__)
 EXPORT_SYMBOL(mcount)
 #endif
 
-#ifdef CONFIG_DYNAMIC_FTRACE
-
 /* mcount uses a frame pointer even if CONFIG_FRAME_POINTER is not set */
 #if !defined(CC_USING_FENTRY) || defined(CONFIG_FRAME_POINTER)
 # define USING_FRAME_POINTER
@@ -170,43 +168,6 @@ GLOBAL(ftrace_regs_call)
 	lea	3*4(%esp), %esp			/* Skip orig_ax, ip and cs */
 
 	jmp	.Lftrace_ret
-#else /* ! CONFIG_DYNAMIC_FTRACE */
-
-ENTRY(function_hook)
-	cmpl	$__PAGE_OFFSET, %esp
-	jb	ftrace_stub			/* Paging not enabled yet? */
-
-	cmpl	$ftrace_stub, ftrace_trace_function
-	jnz	.Ltrace
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	cmpl	$ftrace_stub, ftrace_graph_return
-	jnz	ftrace_graph_caller
-
-	cmpl	$ftrace_graph_entry_stub, ftrace_graph_entry
-	jnz	ftrace_graph_caller
-#endif
-.globl ftrace_stub
-ftrace_stub:
-	ret
-
-	/* taken from glibc */
-.Ltrace:
-	pushl	%eax
-	pushl	%ecx
-	pushl	%edx
-	movl	0xc(%esp), %eax
-	movl	0x4(%ebp), %edx
-	subl	$MCOUNT_INSN_SIZE, %eax
-
-	movl	ftrace_trace_function, %ecx
-	CALL_NOSPEC %ecx
-
-	popl	%edx
-	popl	%ecx
-	popl	%eax
-	jmp	ftrace_stub
-END(function_hook)
-#endif /* CONFIG_DYNAMIC_FTRACE */
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 ENTRY(ftrace_graph_caller)
-- 
2.20.1