[PATCH 5.0 118/139] net: ieee802154: fix missing checks for regmap_update_bits

Greg Kroah-Hartman
2019-05-23T19:36:36Z

[ Upstream commit 22e8860cf8f777fbf6a83f2fb7127f682a8e9de4 ]

regmap_update_bits could fail and deserves a check.

The patch adds the checks and if it fails, returns its error
code upstream.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ieee802154/mcr20a.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/net/ieee802154/mcr20a.c b/drivers/net/ieee802154/mcr20a.c
index c589f5ae75bb5..8bb53ec8d9cf2 100644
--- a/drivers/net/ieee802154/mcr20a.c
+++ b/drivers/net/ieee802154/mcr20a.c
@@ -533,6 +533,8 @@ mcr20a_start(struct ieee802154_hw *hw)
dev_dbg(printdev(lp), "no slotted operation\n");
ret = regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL1,
DAR_PHY_CTRL1_SLOTTED, 0x0);
+ if (ret < 0)
+ return ret;

/* enable irq */
enable_irq(lp->spi->irq);
@@ -540,11 +542,15 @@ mcr20a_start(struct ieee802154_hw *hw)
/* Unmask SEQ interrupt */
ret = regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL2,
DAR_PHY_CTRL2_SEQMSK, 0x0);
+ if (ret < 0)
+ return ret;

/* Start the RX sequence */
dev_dbg(printdev(lp), "start the RX sequence\n");
ret = regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL1,
DAR_PHY_CTRL1_XCVSEQ_MASK, MCR20A_XCVSEQ_RX);
+ if (ret < 0)
+ return ret;

return 0;
}
--
2.20.1