From: Dmitry Osipenko <digetx@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Joseph Lo <josephl@nvidia.com>,
Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Peter De Schrijver <pdeschrijver@nvidia.com>,
Prashant Gaikwad <pgaikwad@nvidia.com>
Cc: devicetree@vger.kernel.org, linux-clk@vger.kernel.org,
linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 0/8] memory: tegra: Introduce Tegra30 EMC driver
Date: Fri, 24 May 2019 20:23:45 +0300 [thread overview]
Message-ID: <20190524172353.29087-1-digetx@gmail.com> (raw)
Hello,
This series introduces driver for the External Memory Controller (EMC)
found on Tegra30 chips, it controls the external DRAM on the board. The
purpose of this driver is to program memory timing for external memory on
the EMC clock rate change. The driver was tested using the ACTMON devfreq
driver that performs memory frequency scaling based on memory-usage load.
Changelog:
v3: - Addressed review comments that were made by Stephen Boyd to v2 by
adding explicit typing for the callback variable, by including
"clk-provider.h" directly in the code and by dropping __clk_lookup
usage where possible.
Added more patches into this series:
memory: tegra20-emc: Drop setting EMC rate to max on probe
memory: tegra20-emc: Adapt for clock driver changes
memory: tegra20-emc: Include io.h instead of iopoll.h
memory: tegra20-emc: Replace clk_get_sys with devm_clk_get
Initially I was going to include these patches into other patchset,
but changed my mind after rearranging things a tad. The "Adapt for
clock driver changes" patch is directly related to the clock changes
done in the first patch of this series, the rest are minor cleanups
that are fine to include here as well.
Added some more words to the commit message of "Add binding for NVIDIA
Tegra30 External Memory Controller" patch, clarifying why common DDR
timing device-tree form isn't suitable for Tegra30.
The Tegra30 EMC driver now explicitly selects the registers access
mode (EMC_DBG mux), not relying on the setting left from bootloader.
v2: - Added support for changing MC clock diver configuration based on
Memory Controller (MC) configuration which is part of the memory
timing.
- Merged the "Add custom EMC clock implementation" patch into this
series because the "Introduce Tegra30 EMC driver" patch directly
depends on it. Please note that Tegra20 EMC driver will need to be
adapted for the clock changes as well, I'll send out the Tegra20
patches after this series will be applied because of some other
dependencies (devfreq) and because the temporary breakage won't
be critical (driver will just error out on probe).
- EMC driver now performs MC configuration validation by checking
that the number of MC / EMC timings matches and that the timings
rate is the same.
- EMC driver now supports timings that want to change the MC clock
configuration.
- Other minor prettifying changes of the code.
Dmitry Osipenko (8):
clk: tegra20/30: Add custom EMC clock implementation
memory: tegra20-emc: Drop setting EMC rate to max on probe
memory: tegra20-emc: Adapt for clock driver changes
memory: tegra20-emc: Include io.h instead of iopoll.h
memory: tegra20-emc: Replace clk_get_sys with devm_clk_get
dt-bindings: memory: Add binding for NVIDIA Tegra30 External Memory
Controller
memory: tegra: Introduce Tegra30 EMC driver
ARM: dts: tegra30: Add External Memory Controller node
.../memory-controllers/nvidia,tegra30-emc.txt | 249 ++++
arch/arm/boot/dts/tegra30.dtsi | 11 +
drivers/clk/tegra/Makefile | 2 +
drivers/clk/tegra/clk-tegra20-emc.c | 299 +++++
drivers/clk/tegra/clk-tegra20.c | 55 +-
drivers/clk/tegra/clk-tegra30.c | 38 +-
drivers/clk/tegra/clk.h | 6 +
drivers/memory/tegra/Kconfig | 10 +
drivers/memory/tegra/Makefile | 1 +
drivers/memory/tegra/mc.c | 3 -
drivers/memory/tegra/mc.h | 30 +-
drivers/memory/tegra/tegra20-emc.c | 94 +-
drivers/memory/tegra/tegra30-emc.c | 1165 +++++++++++++++++
drivers/memory/tegra/tegra30.c | 44 +
include/linux/clk/tegra.h | 14 +
15 files changed, 1903 insertions(+), 118 deletions(-)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.txt
create mode 100644 drivers/clk/tegra/clk-tegra20-emc.c
create mode 100644 drivers/memory/tegra/tegra30-emc.c
--
2.21.0
next reply other threads:[~2019-05-24 17:24 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-24 17:23 Dmitry Osipenko [this message]
2019-05-24 17:23 ` [PATCH v3 1/8] clk: tegra20/30: Add custom EMC clock implementation Dmitry Osipenko
2019-06-13 10:49 ` Peter De Schrijver
2019-06-13 12:14 ` Dmitry Osipenko
2019-05-24 17:23 ` [PATCH v3 2/8] memory: tegra20-emc: Drop setting EMC rate to max on probe Dmitry Osipenko
2019-05-24 17:23 ` [PATCH v3 3/8] memory: tegra20-emc: Adapt for clock driver changes Dmitry Osipenko
2019-05-24 17:23 ` [PATCH v3 4/8] memory: tegra20-emc: Include io.h instead of iopoll.h Dmitry Osipenko
2019-05-24 17:23 ` [PATCH v3 5/8] memory: tegra20-emc: Replace clk_get_sys with devm_clk_get Dmitry Osipenko
2019-05-24 17:23 ` [PATCH v3 6/8] dt-bindings: memory: Add binding for NVIDIA Tegra30 External Memory Controller Dmitry Osipenko
2019-05-24 17:23 ` [PATCH v3 7/8] memory: tegra: Introduce Tegra30 EMC driver Dmitry Osipenko
2019-05-24 17:23 ` [PATCH v3 8/8] ARM: dts: tegra30: Add External Memory Controller node Dmitry Osipenko
2019-06-11 0:01 ` [PATCH v3 0/8] memory: tegra: Introduce Tegra30 EMC driver Dmitry Osipenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190524172353.29087-1-digetx@gmail.com \
--to=digetx@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=josephl@nvidia.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=pdeschrijver@nvidia.com \
--cc=pgaikwad@nvidia.com \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox