public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Nishka Dasgupta <nishkadg.linux@gmail.com>
To: gregkh@linuxfoundation.org, devel@driverdev.osuosl.org,
	linux-kernel@vger.kernel.org, straube.linux@gmail.com,
	larry.finger@lwfinger.net, florian.c.schilhabel@googlemail.com,
	colin.king@canonical.com, valdis.kletnieks@vt.edu,
	tiny.windzz@gmail.com
Cc: Nishka Dasgupta <nishkadg.linux@gmail.com>
Subject: [PATCH 1/2] staging: rtl8712: r8712_setdatarate_cmd(): Change
Date: Fri,  7 Jun 2019 19:36:57 +0530	[thread overview]
Message-ID: <20190607140658.11932-1-nishkadg.linux@gmail.com> (raw)

Change the return values of function r8712_setdatarate_cmd from _SUCCESS
and _FAIL to 0 and -ENOMEM respectively.
Change the return type of the function from u8 to int to reflect this.
Change the call site of the function to check for 0 instead of _SUCCESS.
(Checking that the return value != 0 is not necessary; the return value
itself can simply be passed into the conditional.)

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
---
 drivers/staging/rtl8712/rtl871x_cmd.c         | 8 ++++----
 drivers/staging/rtl8712/rtl871x_cmd.h         | 2 +-
 drivers/staging/rtl8712/rtl871x_ioctl_linux.c | 2 +-
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/staging/rtl8712/rtl871x_cmd.c b/drivers/staging/rtl8712/rtl871x_cmd.c
index 05a78ac24987..e478c031f95f 100644
--- a/drivers/staging/rtl8712/rtl871x_cmd.c
+++ b/drivers/staging/rtl8712/rtl871x_cmd.c
@@ -242,7 +242,7 @@ u8 r8712_sitesurvey_cmd(struct _adapter *padapter,
 	return _SUCCESS;
 }
 
-u8 r8712_setdatarate_cmd(struct _adapter *padapter, u8 *rateset)
+int r8712_setdatarate_cmd(struct _adapter *padapter, u8 *rateset)
 {
 	struct cmd_obj		*ph2c;
 	struct setdatarate_parm	*pbsetdataratepara;
@@ -250,18 +250,18 @@ u8 r8712_setdatarate_cmd(struct _adapter *padapter, u8 *rateset)
 
 	ph2c = kmalloc(sizeof(*ph2c), GFP_ATOMIC);
 	if (!ph2c)
-		return _FAIL;
+		return -ENOMEM;
 	pbsetdataratepara = kmalloc(sizeof(*pbsetdataratepara), GFP_ATOMIC);
 	if (!pbsetdataratepara) {
 		kfree(ph2c);
-		return _FAIL;
+		return -ENOMEM;
 	}
 	init_h2fwcmd_w_parm_no_rsp(ph2c, pbsetdataratepara,
 				   GEN_CMD_CODE(_SetDataRate));
 	pbsetdataratepara->mac_id = 5;
 	memcpy(pbsetdataratepara->datarates, rateset, NumRates);
 	r8712_enqueue_cmd(pcmdpriv, ph2c);
-	return _SUCCESS;
+	return 0;
 }
 
 u8 r8712_set_chplan_cmd(struct _adapter *padapter, int chplan)
diff --git a/drivers/staging/rtl8712/rtl871x_cmd.h b/drivers/staging/rtl8712/rtl871x_cmd.h
index 262984c58efb..800216cca2f6 100644
--- a/drivers/staging/rtl8712/rtl871x_cmd.h
+++ b/drivers/staging/rtl8712/rtl871x_cmd.h
@@ -719,7 +719,7 @@ u8 r8712_joinbss_cmd(struct _adapter *padapter,
 u8 r8712_disassoc_cmd(struct _adapter *padapter);
 u8 r8712_setopmode_cmd(struct _adapter *padapter,
 		 enum NDIS_802_11_NETWORK_INFRASTRUCTURE networktype);
-u8 r8712_setdatarate_cmd(struct _adapter *padapter, u8 *rateset);
+int r8712_setdatarate_cmd(struct _adapter *padapter, u8 *rateset);
 u8 r8712_set_chplan_cmd(struct _adapter  *padapter, int chplan);
 u8 r8712_setbasicrate_cmd(struct _adapter *padapter, u8 *rateset);
 u8 r8712_getrfreg_cmd(struct _adapter *padapter, u8 offset, u8 *pval);
diff --git a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
index b424b8436fcf..761e2ba68a42 100644
--- a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
+++ b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
@@ -1367,7 +1367,7 @@ static int r8711_wx_set_rate(struct net_device *dev,
 			datarates[i] = 0xff;
 		}
 	}
-	if (r8712_setdatarate_cmd(padapter, datarates) != _SUCCESS)
+	if (r8712_setdatarate_cmd(padapter, datarates))
 		ret = -ENOMEM;
 	return ret;
 }
-- 
2.19.1


             reply	other threads:[~2019-06-07 14:07 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-07 14:06 Nishka Dasgupta [this message]
2019-06-07 14:06 ` [PATCH 2/2] staging: rtl8712: r8712_createbss_cmd(): Change Nishka Dasgupta
2019-06-07 14:18   ` Dan Carpenter
2019-06-07 14:15 ` [PATCH 1/2] staging: rtl8712: r8712_setdatarate_cmd(): Change Dan Carpenter
2019-06-10  4:32   ` Nishka Dasgupta
2019-06-10 14:33     ` Dan Carpenter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190607140658.11932-1-nishkadg.linux@gmail.com \
    --to=nishkadg.linux@gmail.com \
    --cc=colin.king@canonical.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=florian.c.schilhabel@googlemail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=larry.finger@lwfinger.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=straube.linux@gmail.com \
    --cc=tiny.windzz@gmail.com \
    --cc=valdis.kletnieks@vt.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox