Re: [PATCH] iio: humidity: Replace older GPIO APIs with GPIO Consumer APIs for the dht11 sensor

[Jonathan Cameron <jic23@kernel.org>]

On Tue, 11 Jun 2019 13:30:42 +0200
Harald Geyer <harald@ccbib.org> wrote:

> Shobhit Kukreti writes:
> > The dht11 driver uses a single gpio to make measurements. It was
> > using the older global gpio numberspace. The patch replaces the
> > old gpio api with the new gpio descriptor based api.
> > 
> > Removed header files "linux/gpio.h" and "linux/of_gpio.h"
> >
> > Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>  
> 
> Acked-by: Harald Geyer <harald@ccbib.org>

Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.

thanks,

Jonathan

> 
> > ---
> >  drivers/iio/humidity/dht11.c | 28 ++++++++++------------------
> >  1 file changed, 10 insertions(+), 18 deletions(-)
> > 
> > diff --git a/drivers/iio/humidity/dht11.c b/drivers/iio/humidity/dht11.c
> > index c815920..f5128d8 100644
> > --- a/drivers/iio/humidity/dht11.c
> > +++ b/drivers/iio/humidity/dht11.c
> > @@ -22,8 +22,7 @@
> >  #include <linux/completion.h>
> >  #include <linux/mutex.h>
> >  #include <linux/delay.h>
> > -#include <linux/gpio.h>
> > -#include <linux/of_gpio.h>
> > +#include <linux/gpio/consumer.h>
> >  #include <linux/timekeeping.h>
> >  
> >  #include <linux/iio/iio.h>
> > @@ -72,7 +71,7 @@
> >  struct dht11 {
> >  	struct device			*dev;
> >  
> > -	int				gpio;
> > +	struct gpio_desc		*gpiod;
> >  	int				irq;
> >  
> >  	struct completion		completion;
> > @@ -179,7 +178,7 @@ static irqreturn_t dht11_handle_irq(int irq, void *data)
> >  	if (dht11->num_edges < DHT11_EDGES_PER_READ && dht11->num_edges >= 0) {
> >  		dht11->edges[dht11->num_edges].ts = ktime_get_boot_ns();
> >  		dht11->edges[dht11->num_edges++].value =
> > -						gpio_get_value(dht11->gpio);
> > +						gpiod_get_value(dht11->gpiod);
> >  
> >  		if (dht11->num_edges >= DHT11_EDGES_PER_READ)
> >  			complete(&dht11->completion);
> > @@ -217,12 +216,12 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
> >  		reinit_completion(&dht11->completion);
> >  
> >  		dht11->num_edges = 0;
> > -		ret = gpio_direction_output(dht11->gpio, 0);
> > +		ret = gpiod_direction_output(dht11->gpiod, 0);
> >  		if (ret)
> >  			goto err;
> >  		usleep_range(DHT11_START_TRANSMISSION_MIN,
> >  			     DHT11_START_TRANSMISSION_MAX);
> > -		ret = gpio_direction_input(dht11->gpio);
> > +		ret = gpiod_direction_input(dht11->gpiod);
> >  		if (ret)
> >  			goto err;
> >  
> > @@ -294,10 +293,8 @@ MODULE_DEVICE_TABLE(of, dht11_dt_ids);
> >  static int dht11_probe(struct platform_device *pdev)
> >  {
> >  	struct device *dev = &pdev->dev;
> > -	struct device_node *node = dev->of_node;
> >  	struct dht11 *dht11;
> >  	struct iio_dev *iio;
> > -	int ret;
> >  
> >  	iio = devm_iio_device_alloc(dev, sizeof(*dht11));
> >  	if (!iio) {
> > @@ -307,18 +304,13 @@ static int dht11_probe(struct platform_device *pdev)
> >  
> >  	dht11 = iio_priv(iio);
> >  	dht11->dev = dev;
> > +	dht11->gpiod = devm_gpiod_get(dev, NULL, GPIOD_IN);
> > +	if (IS_ERR(dht11->gpiod))
> > +		return PTR_ERR(dht11->gpiod);
> >  
> > -	ret = of_get_gpio(node, 0);
> > -	if (ret < 0)
> > -		return ret;
> > -	dht11->gpio = ret;
> > -	ret = devm_gpio_request_one(dev, dht11->gpio, GPIOF_IN, pdev->name);
> > -	if (ret)
> > -		return ret;
> > -
> > -	dht11->irq = gpio_to_irq(dht11->gpio);
> > +	dht11->irq = gpiod_to_irq(dht11->gpiod);
> >  	if (dht11->irq < 0) {
> > -		dev_err(dev, "GPIO %d has no interrupt\n", dht11->gpio);
> > +		dev_err(dev, "GPIO %d has no interrupt\n", desc_to_gpio(dht11->gpiod));
> >  		return -EINVAL;
> >  	}
> >  
> > -- 
> > 2.7.4
> >   
>