[PATCH] USB: serial: ftdi_sio: add ID for isodebug v1

[Andreas Fritiofson <andreas.fritiofson@unjo.com>]

This adds the vid:pid of the isodebug v1 isolated JTAG/SWD+UART. Only the
second channel is available for use as a serial port.

Signed-off-by: Andreas Fritiofson <andreas.fritiofson@unjo.com>
---
 drivers/usb/serial/ftdi_sio.c     | 1 +
 drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++
 2 files changed, 7 insertions(+)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8f5b17471..ba74c2ad6 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1027,6 +1027,7 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(AIRBUS_DS_VID, AIRBUS_DS_P8GR) },
 	/* EZPrototypes devices */
 	{ USB_DEVICE(EZPROTOTYPES_VID, HJELMSLUND_USB485_ISO_PID) },
+	{ USB_DEVICE_INTERFACE_NUMBER(UNJO_VID, ISODEBUG_V1_PID, 1) },
 	{ }					/* Terminating entry */
 };
 
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index b863bedb5..5c681f494 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1541,3 +1541,9 @@
 #define CHETCO_SEASMART_DISPLAY_PID	0xA5AD /* SeaSmart NMEA2000 Display */
 #define CHETCO_SEASMART_LITE_PID	0xA5AE /* SeaSmart Lite USB Adapter */
 #define CHETCO_SEASMART_ANALOG_PID	0xA5AF /* SeaSmart Analog Adapter */
+
+/*
+ * Unjo AB
+ */
+#define UNJO_VID			0x22B7
+#define ISODEBUG_V1_PID			0x150D
-- 
2.17.1