From: Jonathan Cameron <jic23@kernel.org>
To: Fuqian Huang <huangfq.daxian@gmail.com>
Cc: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
freeman.liu@spreadtrum.com
Subject: Re: [PATCH 01/14] iio: adc: sc27xx: Introduce local variable 'struct device *dev'
Date: Sun, 14 Jul 2019 15:50:52 +0100 [thread overview]
Message-ID: <20190714155052.5092cf0d@archlinux> (raw)
In-Reply-To: <20190708123221.11658-1-huangfq.daxian@gmail.com>
On Mon, 8 Jul 2019 20:32:21 +0800
Fuqian Huang <huangfq.daxian@gmail.com> wrote:
> Introduce local variable 'struct device *dev' and use it instead of
> dereferencing it repeatly.
>
> Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Ok, this is a fair bit of churn but probably on balance a worthwhile
little improvement.
Applied to the togreg branch of iio.git and pushed out
as testing to see if we missed anything.
+CC Freeman Liu as original author.
Thanks,
Jonathan
> ---
> drivers/iio/adc/sc27xx_adc.c | 41 +++++++++++++++++++++--------------------
> 1 file changed, 21 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/iio/adc/sc27xx_adc.c b/drivers/iio/adc/sc27xx_adc.c
> index f7f7a18904b4..ec86f640e963 100644
> --- a/drivers/iio/adc/sc27xx_adc.c
> +++ b/drivers/iio/adc/sc27xx_adc.c
> @@ -504,88 +504,89 @@ static void sc27xx_adc_free_hwlock(void *_data)
>
> static int sc27xx_adc_probe(struct platform_device *pdev)
> {
> - struct device_node *np = pdev->dev.of_node;
> + struct device *dev = &pdev->dev;
> + struct device_node *np = dev->of_node;
> struct sc27xx_adc_data *sc27xx_data;
> struct iio_dev *indio_dev;
> int ret;
>
> - indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*sc27xx_data));
> + indio_dev = devm_iio_device_alloc(dev, sizeof(*sc27xx_data));
> if (!indio_dev)
> return -ENOMEM;
>
> sc27xx_data = iio_priv(indio_dev);
>
> - sc27xx_data->regmap = dev_get_regmap(pdev->dev.parent, NULL);
> + sc27xx_data->regmap = dev_get_regmap(dev->parent, NULL);
> if (!sc27xx_data->regmap) {
> - dev_err(&pdev->dev, "failed to get ADC regmap\n");
> + dev_err(dev, "failed to get ADC regmap\n");
> return -ENODEV;
> }
>
> ret = of_property_read_u32(np, "reg", &sc27xx_data->base);
> if (ret) {
> - dev_err(&pdev->dev, "failed to get ADC base address\n");
> + dev_err(dev, "failed to get ADC base address\n");
> return ret;
> }
>
> sc27xx_data->irq = platform_get_irq(pdev, 0);
> if (sc27xx_data->irq < 0) {
> - dev_err(&pdev->dev, "failed to get ADC irq number\n");
> + dev_err(dev, "failed to get ADC irq number\n");
> return sc27xx_data->irq;
> }
>
> ret = of_hwspin_lock_get_id(np, 0);
> if (ret < 0) {
> - dev_err(&pdev->dev, "failed to get hwspinlock id\n");
> + dev_err(dev, "failed to get hwspinlock id\n");
> return ret;
> }
>
> sc27xx_data->hwlock = hwspin_lock_request_specific(ret);
> if (!sc27xx_data->hwlock) {
> - dev_err(&pdev->dev, "failed to request hwspinlock\n");
> + dev_err(dev, "failed to request hwspinlock\n");
> return -ENXIO;
> }
>
> - ret = devm_add_action(&pdev->dev, sc27xx_adc_free_hwlock,
> + ret = devm_add_action(dev, sc27xx_adc_free_hwlock,
> sc27xx_data->hwlock);
> if (ret) {
> sc27xx_adc_free_hwlock(sc27xx_data->hwlock);
> - dev_err(&pdev->dev, "failed to add hwspinlock action\n");
> + dev_err(dev, "failed to add hwspinlock action\n");
> return ret;
> }
>
> init_completion(&sc27xx_data->completion);
> - sc27xx_data->dev = &pdev->dev;
> + sc27xx_data->dev = dev;
>
> ret = sc27xx_adc_enable(sc27xx_data);
> if (ret) {
> - dev_err(&pdev->dev, "failed to enable ADC module\n");
> + dev_err(dev, "failed to enable ADC module\n");
> return ret;
> }
>
> - ret = devm_add_action(&pdev->dev, sc27xx_adc_disable, sc27xx_data);
> + ret = devm_add_action(dev, sc27xx_adc_disable, sc27xx_data);
> if (ret) {
> sc27xx_adc_disable(sc27xx_data);
> - dev_err(&pdev->dev, "failed to add ADC disable action\n");
> + dev_err(dev, "failed to add ADC disable action\n");
> return ret;
> }
>
> - ret = devm_request_threaded_irq(&pdev->dev, sc27xx_data->irq, NULL,
> + ret = devm_request_threaded_irq(dev, sc27xx_data->irq, NULL,
> sc27xx_adc_isr, IRQF_ONESHOT,
> pdev->name, sc27xx_data);
> if (ret) {
> - dev_err(&pdev->dev, "failed to request ADC irq\n");
> + dev_err(dev, "failed to request ADC irq\n");
> return ret;
> }
>
> - indio_dev->dev.parent = &pdev->dev;
> - indio_dev->name = dev_name(&pdev->dev);
> + indio_dev->dev.parent = dev;
> + indio_dev->name = dev_name(dev);
> indio_dev->modes = INDIO_DIRECT_MODE;
> indio_dev->info = &sc27xx_info;
> indio_dev->channels = sc27xx_channels;
> indio_dev->num_channels = ARRAY_SIZE(sc27xx_channels);
> - ret = devm_iio_device_register(&pdev->dev, indio_dev);
> + ret = devm_iio_device_register(dev, indio_dev);
> if (ret)
> - dev_err(&pdev->dev, "could not register iio (ADC)");
> + dev_err(dev, "could not register iio (ADC)");
>
> return ret;
> }
prev parent reply other threads:[~2019-07-14 14:51 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-08 12:32 [PATCH 01/14] iio: adc: sc27xx: Introduce local variable 'struct device *dev' Fuqian Huang
2019-07-14 14:50 ` Jonathan Cameron [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190714155052.5092cf0d@archlinux \
--to=jic23@kernel.org \
--cc=freeman.liu@spreadtrum.com \
--cc=huangfq.daxian@gmail.com \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox