Re: [PATCH] iio: imu: st_lsm6dsx: make IIO_CHAN_INFO_SCALE shared by type

[Lorenzo Bianconi <lorenzo@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 2460 bytes --]

> On Thu,  1 Aug 2019 16:39:08 +0200
> Martin Kepplinger <martin.kepplinger@puri.sm> wrote:
> 
> > in_accel_x_scale, in_accel_y_scale and in_accel_z_scale are always
> > the same. The scale is still defined to be in "info_mask_separate".
> > 
> > Userspace (iio-sensor-proxy and others) is not used to that and only
> > looks for "in_accel_scale" for the scaling factor to apply.
> > 
> > Change IIO_CHAN_INFO_SCALE from being separate in all channel to be
> > shared by type.
> > 
> > This removes in_accel_x_scale, in_accel_y_scale and in_accel_z_scale and
> > makes available in_accel_scale.
> > 
> > Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> > ---
> > 
> > AFAIK in all other drivers, IIO_CHAN_INFO_SCALE is "shared by type". Sure
> > devices are different, but LSM6DSX devices still don't have different
> > scales for x/y/z channels :)
> 
> I'm fine with this, but would like a Lorenzo ack as we have had
> devices in other series where these are not equal.   It used to
> be common in accelerometers as I think it was hard to get a large
> range in the vertical direction.  Doubt that applies on these modern
> parts though!
> 
> Thanks,
> 
> Jonathan

AFAIK all the supported sensors have the same sensitivity on all axis and so I
am fine with this patch (it should be done in this way from day 0 actually :))
but is it going to break uapi? if not feel free to add:

Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>

Regards,
Lorenzo

> 
> 
> > 
> > thanks,
> > 
> >                               martin
> > 
> > 
> > 
> >  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> > index af379a5429ed..59c3ab7cbb6f 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> > @@ -56,8 +56,8 @@ enum st_lsm6dsx_hw_id {
> >  	.address = addr,						\
> >  	.modified = 1,							\
> >  	.channel2 = mod,						\
> > -	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |			\
> > -			      BIT(IIO_CHAN_INFO_SCALE),			\
> > +	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),			\
> > +	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),		\
> >  	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
> >  	.scan_index = scan_idx,						\
> >  	.scan_type = {							\
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]