Re: [v2 2/3] dt/bindings: display: Add optional property node defined for Mali DP500

[Rob Herring <robh@kernel.org>]

On Fri, Jul 19, 2019 at 05:58:42PM +0800, Wen He wrote:
> Add optional property node 'arm,malidp-arqos-value' for the Mali DP500.
> This property describe the ARQoS levels of DP500's QoS signaling.
> 
> Signed-off-by: Wen He <wen.he_1@nxp.com>
> ---
>  Documentation/devicetree/bindings/display/arm,malidp.txt | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/arm,malidp.txt b/Documentation/devicetree/bindings/display/arm,malidp.txt
> index 2f7870983ef1..76a0e7251251 100644
> --- a/Documentation/devicetree/bindings/display/arm,malidp.txt
> +++ b/Documentation/devicetree/bindings/display/arm,malidp.txt
> @@ -37,6 +37,8 @@ Optional properties:
>      Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
>      to be used for the framebuffer; if not present, the framebuffer may
>      be located anywhere in memory.
> +  - arm,malidp-arqos-high-level: integer of u32 value describing the ARQoS
> +    levels of DP500's QoS signaling.

u32 here, and...

>  
>  
>  Example:
> @@ -54,6 +56,7 @@ Example:
>  		clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
>  		clock-names = "pxlclk", "mclk", "aclk", "pclk";
>  		arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
> +		arm,malidp-arqos-high-level = <&rqosvalue>;

phandle here?

>  		port {
>  			dp0_output: endpoint {
>  				remote-endpoint = <&tda998x_2_input>;
> -- 
> 2.17.1
>