[PATCH AUTOSEL 4.19 53/68] net: stmmac: Fix issues when number of Queues >= 4

Sasha Levin
2019-08-14T02:18:10Z

From: Jose Abreu <Jose.Abreu@synopsys.com>

[ Upstream commit e8df7e8c233a18d2704e37ecff47583b494789d3 ]

When queues >= 4 we use different registers but we were not subtracting
the offset of 4. Fix this.

Found out by Coverity.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 4 ++++
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 4 ++++
2 files changed, 8 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index d0e6e1503581f..48cf5e2b24417 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -88,6 +88,8 @@ static void dwmac4_rx_queue_priority(struct mac_device_info *hw,
u32 value;

base_register = (queue < 4) ? GMAC_RXQ_CTRL2 : GMAC_RXQ_CTRL3;
+ if (queue >= 4)
+ queue -= 4;

value = readl(ioaddr + base_register);

@@ -105,6 +107,8 @@ static void dwmac4_tx_queue_priority(struct mac_device_info *hw,
u32 value;

base_register = (queue < 4) ? GMAC_TXQ_PRTY_MAP0 : GMAC_TXQ_PRTY_MAP1;
+ if (queue >= 4)
+ queue -= 4;

value = readl(ioaddr + base_register);

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
index d182f82f7b586..870302a7177e2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
@@ -106,6 +106,8 @@ static void dwxgmac2_rx_queue_prio(struct mac_device_info *hw, u32 prio,
u32 value, reg;

reg = (queue < 4) ? XGMAC_RXQ_CTRL2 : XGMAC_RXQ_CTRL3;
+ if (queue >= 4)
+ queue -= 4;

value = readl(ioaddr + reg);
value &= ~XGMAC_PSRQ(queue);
@@ -169,6 +171,8 @@ static void dwxgmac2_map_mtl_to_dma(struct mac_device_info *hw, u32 queue,
u32 value, reg;

reg = (queue < 4) ? XGMAC_MTL_RXQ_DMA_MAP0 : XGMAC_MTL_RXQ_DMA_MAP1;
+ if (queue >= 4)
+ queue -= 4;

value = readl(ioaddr + reg);
value &= ~XGMAC_QxMDMACH(queue);
--
2.20.1