From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: linux-hyperv@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, x86@kernel.org,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
"H. Peter Anvin" <hpa@zytor.com>,
"K. Y. Srinivasan" <kys@microsoft.com>,
Haiyang Zhang <haiyangz@microsoft.com>,
Stephen Hemminger <sthemmin@microsoft.com>,
Sasha Levin <sashal@kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Michael Kelley <mikelley@microsoft.com>,
Tianyu Lan <Tianyu.Lan@microsoft.com>,
Peter Zijlstra <peterz@infradead.org>
Subject: [PATCH] x86/hyper-v: enable TSC page clocksource on 32bit
Date: Wed, 21 Aug 2019 11:56:50 +0200 [thread overview]
Message-ID: <20190821095650.1841-1-vkuznets@redhat.com> (raw)
There is no particular reason to not enable TSC page clocksource
on 32-bit. mul_u64_u64_shr() is available and despite the increased
computational complexity (compared to 64bit) TSC page is still a huge
win compared to MSR-based clocksource.
In-kernel reads:
MSR based clocksource: 3361 cycles
TSC page clocksource: 49 cycles
Reads from userspace (unilizing vDSO in case of TSC page):
MSR based clocksource: 5664 cycles
TSC page clocksource: 131 cycles
Enabling TSC page on 32bits allows us to get rid of CONFIG_HYPERV_TSCPAGE
as it is now not any different from CONFIG_HYPERV_TIMER.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
---
arch/x86/include/asm/vdso/gettimeofday.h | 6 +++---
drivers/clocksource/hyperv_timer.c | 11 -----------
drivers/hv/Kconfig | 3 ---
include/clocksource/hyperv_timer.h | 6 ++----
4 files changed, 5 insertions(+), 21 deletions(-)
diff --git a/arch/x86/include/asm/vdso/gettimeofday.h b/arch/x86/include/asm/vdso/gettimeofday.h
index ba71a63cdac4..e9ee139cf29e 100644
--- a/arch/x86/include/asm/vdso/gettimeofday.h
+++ b/arch/x86/include/asm/vdso/gettimeofday.h
@@ -51,7 +51,7 @@ extern struct pvclock_vsyscall_time_info pvclock_page
__attribute__((visibility("hidden")));
#endif
-#ifdef CONFIG_HYPERV_TSCPAGE
+#ifdef CONFIG_HYPERV_TIMER
extern struct ms_hyperv_tsc_page hvclock_page
__attribute__((visibility("hidden")));
#endif
@@ -228,7 +228,7 @@ static u64 vread_pvclock(void)
}
#endif
-#ifdef CONFIG_HYPERV_TSCPAGE
+#ifdef CONFIG_HYPERV_TIMER
static u64 vread_hvclock(void)
{
return hv_read_tsc_page(&hvclock_page);
@@ -251,7 +251,7 @@ static inline u64 __arch_get_hw_counter(s32 clock_mode)
return vread_pvclock();
}
#endif
-#ifdef CONFIG_HYPERV_TSCPAGE
+#ifdef CONFIG_HYPERV_TIMER
if (clock_mode == VCLOCK_HVCLOCK) {
barrier();
return vread_hvclock();
diff --git a/drivers/clocksource/hyperv_timer.c b/drivers/clocksource/hyperv_timer.c
index ba2c79e6a0ee..b6083faab540 100644
--- a/drivers/clocksource/hyperv_timer.c
+++ b/drivers/clocksource/hyperv_timer.c
@@ -212,8 +212,6 @@ EXPORT_SYMBOL_GPL(hv_stimer_global_cleanup);
struct clocksource *hyperv_cs;
EXPORT_SYMBOL_GPL(hyperv_cs);
-#ifdef CONFIG_HYPERV_TSCPAGE
-
static struct ms_hyperv_tsc_page *tsc_pg;
struct ms_hyperv_tsc_page *hv_get_tsc_page(void)
@@ -244,7 +242,6 @@ static struct clocksource hyperv_cs_tsc = {
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-#endif
static u64 notrace read_hv_sched_clock_msr(void)
{
@@ -271,7 +268,6 @@ static struct clocksource hyperv_cs_msr = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-#ifdef CONFIG_HYPERV_TSCPAGE
static bool __init hv_init_tsc_clocksource(void)
{
u64 tsc_msr;
@@ -306,13 +302,6 @@ static bool __init hv_init_tsc_clocksource(void)
sched_clock_register(read_hv_sched_clock_tsc, 64, HV_CLOCK_HZ);
return true;
}
-#else
-static bool __init hv_init_tsc_clocksource(void)
-{
- return false;
-}
-#endif
-
void __init hv_init_clocksource(void)
{
diff --git a/drivers/hv/Kconfig b/drivers/hv/Kconfig
index 9a59957922d4..79e5356a737a 100644
--- a/drivers/hv/Kconfig
+++ b/drivers/hv/Kconfig
@@ -14,9 +14,6 @@ config HYPERV
config HYPERV_TIMER
def_bool HYPERV
-config HYPERV_TSCPAGE
- def_bool HYPERV && X86_64
-
config HYPERV_UTILS
tristate "Microsoft Hyper-V Utilities driver"
depends on HYPERV && CONNECTOR && NLS
diff --git a/include/clocksource/hyperv_timer.h b/include/clocksource/hyperv_timer.h
index a821deb8ecb2..f72e4619d0a7 100644
--- a/include/clocksource/hyperv_timer.h
+++ b/include/clocksource/hyperv_timer.h
@@ -28,12 +28,10 @@ extern void hv_stimer_cleanup(unsigned int cpu);
extern void hv_stimer_global_cleanup(void);
extern void hv_stimer0_isr(void);
-#if IS_ENABLED(CONFIG_HYPERV)
+#ifdef CONFIG_HYPERV_TIMER
extern struct clocksource *hyperv_cs;
extern void hv_init_clocksource(void);
-#endif /* CONFIG_HYPERV */
-#ifdef CONFIG_HYPERV_TSCPAGE
extern struct ms_hyperv_tsc_page *hv_get_tsc_page(void);
static inline notrace u64
@@ -102,6 +100,6 @@ static inline u64 hv_read_tsc_page_tsc(const struct ms_hyperv_tsc_page *tsc_pg,
{
return U64_MAX;
}
-#endif /* CONFIG_HYPERV_TSCPAGE */
+#endif /* CONFIG_HYPERV_TIMER */
#endif
--
2.20.1
next reply other threads:[~2019-08-21 9:56 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-21 9:56 Vitaly Kuznetsov [this message]
2019-08-21 21:16 ` [PATCH] x86/hyper-v: enable TSC page clocksource on 32bit Michael Kelley
2019-08-21 21:17 ` Thomas Gleixner
2019-08-21 21:23 ` Thomas Gleixner
2019-08-22 7:52 ` Vitaly Kuznetsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190821095650.1841-1-vkuznets@redhat.com \
--to=vkuznets@redhat.com \
--cc=Tianyu.Lan@microsoft.com \
--cc=bp@alien8.de \
--cc=daniel.lezcano@linaro.org \
--cc=haiyangz@microsoft.com \
--cc=hpa@zytor.com \
--cc=kys@microsoft.com \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mikelley@microsoft.com \
--cc=mingo@redhat.com \
--cc=peterz@infradead.org \
--cc=sashal@kernel.org \
--cc=sthemmin@microsoft.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox