From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: linux-i2c@vger.kernel.org, Chanwoo Choi <cw00.choi@samsung.com>,
Krzysztof Kozlowski <krzk@kernel.org>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Alessandro Zummo <a.zummo@towertech.it>,
linux-kernel@vger.kernel.org, linux-rtc@vger.kernel.org
Subject: Re: [PATCH 1/2] rtc: max77686: convert to devm_i2c_new_dummy_device()
Date: Thu, 29 Aug 2019 22:57:52 +0200 [thread overview]
Message-ID: <20190829205752.GL21922@piout.net> (raw)
In-Reply-To: <20190820154239.8230-2-wsa+renesas@sang-engineering.com>
On 20/08/2019 17:42:37+0200, Wolfram Sang wrote:
> I was about to simplify the call to i2c_unregister_device() when I
> realized that converting to devm_i2c_new_dummy_device() will simplify
> the driver a lot. So I took this approach.
>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
> Build tested only, buildbot is happy, too.
>
> Please apply to your tree.
>
I'm confused because I already applied:
https://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git/commit/?h=rtc-next&id=7150710f3084de8d35ce3221eeae2caee8813f92
> drivers/rtc/rtc-max77686.c | 17 ++++-------------
> 1 file changed, 4 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/rtc/rtc-max77686.c b/drivers/rtc/rtc-max77686.c
> index d04fd1024697..4027b33034dc 100644
> --- a/drivers/rtc/rtc-max77686.c
> +++ b/drivers/rtc/rtc-max77686.c
> @@ -693,8 +693,8 @@ static int max77686_init_rtc_regmap(struct max77686_rtc_info *info)
> goto add_rtc_irq;
> }
>
> - info->rtc = i2c_new_dummy_device(parent_i2c->adapter,
> - info->drv_data->rtc_i2c_addr);
> + info->rtc = devm_i2c_new_dummy_device(info->dev, parent_i2c->adapter,
> + info->drv_data->rtc_i2c_addr);
> if (IS_ERR(info->rtc)) {
> dev_err(info->dev, "Failed to allocate I2C device for RTC\n");
> return PTR_ERR(info->rtc);
> @@ -705,7 +705,7 @@ static int max77686_init_rtc_regmap(struct max77686_rtc_info *info)
> if (IS_ERR(info->rtc_regmap)) {
> ret = PTR_ERR(info->rtc_regmap);
> dev_err(info->dev, "Failed to allocate RTC regmap: %d\n", ret);
> - goto err_unregister_i2c;
> + return ret;
> }
>
> add_rtc_irq:
> @@ -715,15 +715,10 @@ static int max77686_init_rtc_regmap(struct max77686_rtc_info *info)
> &info->rtc_irq_data);
> if (ret < 0) {
> dev_err(info->dev, "Failed to add RTC irq chip: %d\n", ret);
> - goto err_unregister_i2c;
> + return ret;
> }
>
> return 0;
> -
> -err_unregister_i2c:
> - if (info->rtc)
> - i2c_unregister_device(info->rtc);
> - return ret;
> }
>
> static int max77686_rtc_probe(struct platform_device *pdev)
> @@ -786,8 +781,6 @@ static int max77686_rtc_probe(struct platform_device *pdev)
>
> err_rtc:
> regmap_del_irq_chip(info->rtc_irq, info->rtc_irq_data);
> - if (info->rtc)
> - i2c_unregister_device(info->rtc);
>
> return ret;
> }
> @@ -798,8 +791,6 @@ static int max77686_rtc_remove(struct platform_device *pdev)
>
> free_irq(info->virq, info);
> regmap_del_irq_chip(info->rtc_irq, info->rtc_irq_data);
> - if (info->rtc)
> - i2c_unregister_device(info->rtc);
>
> return 0;
> }
> --
> 2.20.1
>
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
next prev parent reply other threads:[~2019-08-29 20:58 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-20 15:42 [PATCH 0/2] rtc: convert two drivers to devm_i2c_new_dummy_device() Wolfram Sang
2019-08-20 15:42 ` [PATCH 1/2] rtc: max77686: convert " Wolfram Sang
2019-08-29 20:57 ` Alexandre Belloni [this message]
2019-08-30 12:45 ` Wolfram Sang
2019-08-30 12:53 ` Alexandre Belloni
2019-08-30 13:00 ` Wolfram Sang
2019-08-30 13:06 ` Alexandre Belloni
2019-08-30 13:18 ` Wolfram Sang
2019-08-20 15:42 ` [PATCH 2/2] rtc: s35390a: " Wolfram Sang
2019-08-29 20:58 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190829205752.GL21922@piout.net \
--to=alexandre.belloni@bootlin.com \
--cc=a.zummo@towertech.it \
--cc=b.zolnierkie@samsung.com \
--cc=cw00.choi@samsung.com \
--cc=krzk@kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox