public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Amy.Shih@advantech.com.tw
Cc: she90122@gmail.com, oakley.ding@advantech.com.tw,
	bichan.lu@advantech.com.tw, jia.sui@advantech.com.cn,
	Jean Delvare <jdelvare@suse.com>,
	linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [v6,1/1] hwmon: (nct7904) Fix incorrect temperature limitation register setting of LTD.
Date: Mon, 2 Sep 2019 09:09:48 -0700	[thread overview]
Message-ID: <20190902160948.GA16583@roeck-us.net> (raw)
In-Reply-To: <20850618155720.24857-1-Amy.Shih@advantech.com.tw>

On Mon, Jun 18, 2085 at 03:57:19PM +0000, Amy.Shih@advantech.com.tw wrote:
> From: "amy.shih" <amy.shih@advantech.com.tw>
> 
> According to kernel hwmon sysfs-interface documentation, temperature
> critical max value, typically greater than corresponding temp_max values.
> Thus, reads the LTD_HV_HL (LTD HIGH VALUE HIGH LIMITATION) and LTD_LV_HL
> (LTD LOW VALUE HIGH LIMITATION) for case hwmon_temp_crit and
> hwmon_temp_crit_hyst. Reads the LTD_HV_LL (HIGH VALUE LOW LIMITATION)
> and LTD_LV_LL (LOW VALUE LOW LIMITATION) for case hwmon_temp_max
> and hwmon_temp_max_hyst.
> 
> Signed-off-by: amy.shih <amy.shih@advantech.com.tw>
> ---
> 
> Changes in v6:
> - Fix incorrect temperature limitation register setting of LTD.

This is a separate (follow-up) patch; v6 is inappropriate here.
Nevertheless, applied on top of the previous patch to hwmon-next.

Thanks,
Guenter

> Changes in v5:
> - Squashed subsequent fixes of three patches into one patch.
> Changes in v4:
> - Fix the incorrect return value of case hwmon_fan_min in function "nct7904_write_fan".
> - Fix the confused calculation of case hwmon_fan_min in function
> Changes in v3:
> - Squashed subsequent fixes of patches into one patch.
> 
> -- Fix bad fallthrough in various switch statements.
> -- Fix the wrong declared of tmp as u8 in nct7904_write_in, declared tmp to int.
> -- Fix incorrect register setting of voltage.
> -- Fix incorrect register bit mapping of temperature alarm.
> -- Fix wrong return code 0x1fff in function nct7904_write_fan.
> -- Delete wrong comment in function nct7904_write_in.
> -- Fix wrong attribute names for temperature.
> -- Fix wrong registers setting for temperature.
> 
> Changes in v2:
> - Fix bad fallthrough in various switch statements.
> - Fix the wrong declared of tmp as u8 in nct7904_write_in, declared tmp to int.
> ---
>  drivers/hwmon/nct7904.c | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/hwmon/nct7904.c b/drivers/hwmon/nct7904.c
> index 76372f20d71a..ce688ab4fce2 100644
> --- a/drivers/hwmon/nct7904.c
> +++ b/drivers/hwmon/nct7904.c
> @@ -398,22 +398,22 @@ static int nct7904_read_temp(struct device *dev, u32 attr, int channel,
>  		}
>  		return 0;
>  	case hwmon_temp_max:
> -		reg1 = LTD_HV_HL_REG;
> +		reg1 = LTD_HV_LL_REG;
>  		reg2 = TEMP_CH1_W_REG;
>  		reg3 = DTS_T_CPU1_W_REG;
>  		break;
>  	case hwmon_temp_max_hyst:
> -		reg1 = LTD_LV_HL_REG;
> +		reg1 = LTD_LV_LL_REG;
>  		reg2 = TEMP_CH1_WH_REG;
>  		reg3 = DTS_T_CPU1_WH_REG;
>  		break;
>  	case hwmon_temp_crit:
> -		reg1 = LTD_HV_LL_REG;
> +		reg1 = LTD_HV_HL_REG;
>  		reg2 = TEMP_CH1_C_REG;
>  		reg3 = DTS_T_CPU1_C_REG;
>  		break;
>  	case hwmon_temp_crit_hyst:
> -		reg1 = LTD_LV_LL_REG;
> +		reg1 = LTD_LV_HL_REG;
>  		reg2 = TEMP_CH1_CH_REG;
>  		reg3 = DTS_T_CPU1_CH_REG;
>  		break;
> @@ -507,22 +507,22 @@ static int nct7904_write_temp(struct device *dev, u32 attr, int channel,
>  
>  	switch (attr) {
>  	case hwmon_temp_max:
> -		reg1 = LTD_HV_HL_REG;
> +		reg1 = LTD_HV_LL_REG;
>  		reg2 = TEMP_CH1_W_REG;
>  		reg3 = DTS_T_CPU1_W_REG;
>  		break;
>  	case hwmon_temp_max_hyst:
> -		reg1 = LTD_LV_HL_REG;
> +		reg1 = LTD_LV_LL_REG;
>  		reg2 = TEMP_CH1_WH_REG;
>  		reg3 = DTS_T_CPU1_WH_REG;
>  		break;
>  	case hwmon_temp_crit:
> -		reg1 = LTD_HV_LL_REG;
> +		reg1 = LTD_HV_HL_REG;
>  		reg2 = TEMP_CH1_C_REG;
>  		reg3 = DTS_T_CPU1_C_REG;
>  		break;
>  	case hwmon_temp_crit_hyst:
> -		reg1 = LTD_LV_LL_REG;
> +		reg1 = LTD_LV_HL_REG;
>  		reg2 = TEMP_CH1_CH_REG;
>  		reg3 = DTS_T_CPU1_CH_REG;
>  		break;

  reply	other threads:[~2019-09-02 16:09 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2085-06-18 15:57 [v6,1/1] hwmon: (nct7904) Fix incorrect temperature limitation register setting of LTD Amy.Shih
2019-09-02 16:09 ` Guenter Roeck [this message]
2019-09-28  9:37 ` Jean Delvare

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190902160948.GA16583@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=Amy.Shih@advantech.com.tw \
    --cc=bichan.lu@advantech.com.tw \
    --cc=jdelvare@suse.com \
    --cc=jia.sui@advantech.com.cn \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=oakley.ding@advantech.com.tw \
    --cc=she90122@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox