From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Tony Lindgren <tony@atomide.com>, Suman Anna <s-anna@ti.com>,
Keerthy <j-keerthy@ti.com>, Sasha Levin <sashal@kernel.org>,
linux-omap@vger.kernel.org
Subject: [PATCH AUTOSEL 4.19 04/52] ARM: OMAP2+: Fix missing SYSC_HAS_RESET_STATUS for dra7 epwmss
Date: Wed, 4 Sep 2019 11:59:16 -0400 [thread overview]
Message-ID: <20190904160004.3671-4-sashal@kernel.org> (raw)
In-Reply-To: <20190904160004.3671-1-sashal@kernel.org>
From: Tony Lindgren <tony@atomide.com>
[ Upstream commit afd58b162e48076e3fe66d08a69eefbd6fe71643 ]
TRM says PWMSS_SYSCONFIG bit for SOFTRESET changes to zero when
reset is completed. Let's configure it as otherwise we get warnings
on boot when we check the data against dts provided data. Eventually
the legacy platform data will be just dropped, but let's fix the
warning first.
Reviewed-by: Suman Anna <s-anna@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index e6c7061a8e736..3547f32822b64 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -385,7 +385,8 @@ static struct omap_hwmod dra7xx_dcan2_hwmod = {
static struct omap_hwmod_class_sysconfig dra7xx_epwmss_sysc = {
.rev_offs = 0x0,
.sysc_offs = 0x4,
- .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET,
+ .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_RESET_STATUS,
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type2,
};
--
2.20.1
next prev parent reply other threads:[~2019-09-04 16:12 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-04 15:59 [PATCH AUTOSEL 4.19 01/52] ieee802154: hwsim: Fix error handle path in hwsim_init_module Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 02/52] ieee802154: hwsim: unregister hw while hwsim_subscribe_all_others fails Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 03/52] ARM: dts: am57xx: Disable voltage switching for SD card Sasha Levin
2019-09-04 15:59 ` Sasha Levin [this message]
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 05/52] bus: ti-sysc: Fix using configured sysc mask value Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 06/52] s390/bpf: fix lcgr instruction encoding Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 07/52] ARM: OMAP2+: Fix omap4 errata warning on other SoCs Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 08/52] ARM: dts: dra74x: Fix iodelay configuration for mmc3 Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 09/52] ARM: OMAP1: ams-delta-fiq: Fix missing irq_ack Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 10/52] bus: ti-sysc: Simplify cleanup upon failures in sysc_probe() Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 11/52] s390/bpf: use 32-bit index for tail calls Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 12/52] batman-adv: fix uninit-value in batadv_netlink_get_ifindex() Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 13/52] selftests/bpf: fix "bind{4, 6} deny specific IP & port" on s390 Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 14/52] tools: bpftool: close prog FD before exit on showing a single program Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 15/52] fpga: altera-ps-spi: Fix getting of optional confd gpio Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 16/52] netfilter: ebtables: Fix argument order to ADD_COUNTER Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 17/52] netfilter: nft_flow_offload: missing netlink attribute policy Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 18/52] netfilter: xt_nfacct: Fix alignment mismatch in xt_nfacct_match_info Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 19/52] NFSv4: Fix return values for nfs4_file_open() Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 20/52] NFSv4: Fix return value in nfs_finish_open() Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 21/52] NFS: Fix initialisation of I/O result struct in nfs_pgio_rpcsetup Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 22/52] Kconfig: Fix the reference to the IDT77105 Phy driver in the description of ATM_NICSTAR_USE_IDT77105 Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 23/52] xdp: unpin xdp umem pages in error path Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 24/52] qed: Add cleanup in qed_slowpath_start() Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 25/52] ARM: 8874/1: mm: only adjust sections of valid mm structures Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 26/52] batman-adv: Only read OGM tvlv_len after buffer len check Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 27/52] batman-adv: Only read OGM2 " Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 28/52] bpf: allow narrow loads of some sk_reuseport_md fields with offset > 0 Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 29/52] r8152: Set memory to all 0xFFs on failed reg reads Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 30/52] x86/apic: Fix arch_dynirq_lower_bound() bug for DT enabled machines Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 31/52] netfilter: xt_physdev: Fix spurious error message in physdev_mt_check Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 32/52] netfilter: nf_conntrack_ftp: Fix debug output Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 33/52] NFSv2: Fix eof handling Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 34/52] NFSv2: Fix write regression Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 35/52] kallsyms: Don't let kallsyms_lookup_size_offset() fail on retrieving the first symbol Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 36/52] cifs: set domainName when a domain-key is used in multiuser Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 37/52] cifs: Use kzfree() to zero out the password Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 38/52] x86/build: Add -Wnoaddress-of-packed-member to REALMODE_CFLAGS, to silence GCC9 build warning Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 39/52] usb: host: xhci-tegra: Set DMA mask correctly Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 40/52] ARM: 8901/1: add a criteria for pfn_valid of arm Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 41/52] ibmvnic: Do not process reset during or after device removal Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 42/52] sky2: Disable MSI on yet another ASUS boards (P6Xxxx) Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 43/52] i2c: designware: Synchronize IRQs when unregistering slave client Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 44/52] perf/x86/intel: Restrict period on Nehalem Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 45/52] perf/x86/amd/ibs: Fix sample bias for dispatched micro-ops Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 46/52] amd-xgbe: Fix error path in xgbe_mod_init() Sasha Levin
2019-09-04 15:59 ` [PATCH AUTOSEL 4.19 47/52] net: stmmac: dwmac-rk: Don't fail if phy regulator is absent Sasha Levin
2019-09-04 16:00 ` [PATCH AUTOSEL 4.19 48/52] tools/power x86_energy_perf_policy: Fix "uninitialized variable" warnings at -O2 Sasha Levin
2019-09-04 16:00 ` [PATCH AUTOSEL 4.19 49/52] tools/power x86_energy_perf_policy: Fix argument parsing Sasha Levin
2019-09-04 16:00 ` [PATCH AUTOSEL 4.19 50/52] tools/power turbostat: fix buffer overrun Sasha Levin
2019-09-04 16:00 ` [PATCH AUTOSEL 4.19 51/52] net: aquantia: fix out of memory condition on rx side Sasha Levin
2019-09-04 16:00 ` [PATCH AUTOSEL 4.19 52/52] net: seeq: Fix the function used to release some memory in an error handling path Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190904160004.3671-4-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=j-keerthy@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=s-anna@ti.com \
--cc=stable@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox