From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Alexandre Belloni <alexandre.belloni@bootlin.com>
Subject: [PATCH] pinctrl: at91-pio4: implement .get_multiple and .set_multiple
Date: Thu, 5 Sep 2019 16:13:04 +0200 [thread overview]
Message-ID: <20190905141304.22005-1-alexandre.belloni@bootlin.com> (raw)
Implement .get_multiple and .set_multiple to allow reading or setting
multiple pins simultaneously. Pins in the same bank will all be switched at
the same time, improving synchronization and performances.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/pinctrl/pinctrl-at91-pio4.c | 60 +++++++++++++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
index d6de4d360cd4..488a302a60d4 100644
--- a/drivers/pinctrl/pinctrl-at91-pio4.c
+++ b/drivers/pinctrl/pinctrl-at91-pio4.c
@@ -328,6 +328,35 @@ static int atmel_gpio_get(struct gpio_chip *chip, unsigned offset)
return !!(reg & BIT(pin->line));
}
+static int atmel_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
+ unsigned long *bits)
+{
+ struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip);
+ unsigned int bank;
+
+ bitmap_zero(bits, atmel_pioctrl->npins);
+
+ for (bank = 0; bank < atmel_pioctrl->nbanks; bank++) {
+ unsigned int word = bank;
+ unsigned int offset = 0;
+ unsigned int reg;
+
+#if ATMEL_PIO_NPINS_PER_BANK != BITS_PER_LONG
+ word = BIT_WORD(bank * ATMEL_PIO_NPINS_PER_BANK);
+ offset = bank * ATMEL_PIO_NPINS_PER_BANK % BITS_PER_LONG;
+#endif
+ if (!mask[word])
+ continue;
+
+ reg = atmel_gpio_read(atmel_pioctrl, bank, ATMEL_PIO_PDSR);
+ bits[word] |= mask[word] & (reg << offset);
+
+ pr_err("ABE: %d %08x\n", bank, bits[word]);
+ }
+
+ return 0;
+}
+
static int atmel_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
int value)
{
@@ -358,11 +387,42 @@ static void atmel_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
BIT(pin->line));
}
+static void atmel_gpio_set_multiple(struct gpio_chip *chip, unsigned long *mask,
+ unsigned long *bits)
+{
+ struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip);
+ unsigned int bank;
+
+ for (bank = 0; bank < atmel_pioctrl->nbanks; bank++) {
+ unsigned int bitmask;
+ unsigned int word = bank;
+
+#if ATMEL_PIO_NPINS_PER_BANK != BITS_PER_LONG
+ word = BIT_WORD(bank * ATMEL_PIO_NPINS_PER_BANK);
+#endif
+ if (!mask[word])
+ continue;
+
+ bitmask = mask[word] & bits[word];
+ atmel_gpio_write(atmel_pioctrl, bank, ATMEL_PIO_SODR, bitmask);
+
+ bitmask = mask[word] & ~bits[word];
+ atmel_gpio_write(atmel_pioctrl, bank, ATMEL_PIO_CODR, bitmask);
+
+#if ATMEL_PIO_NPINS_PER_BANK != BITS_PER_LONG
+ mask[word] >>= ATMEL_PIO_NPINS_PER_BANK;
+ bits[word] >>= ATMEL_PIO_NPINS_PER_BANK;
+#endif
+ }
+}
+
static struct gpio_chip atmel_gpio_chip = {
.direction_input = atmel_gpio_direction_input,
.get = atmel_gpio_get,
+ .get_multiple = atmel_gpio_get_multiple,
.direction_output = atmel_gpio_direction_output,
.set = atmel_gpio_set,
+ .set_multiple = atmel_gpio_set_multiple,
.to_irq = atmel_gpio_to_irq,
.base = 0,
};
--
2.21.0
next reply other threads:[~2019-09-05 14:20 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-05 14:13 Alexandre Belloni [this message]
2019-09-05 14:33 ` [PATCH] pinctrl: at91-pio4: implement .get_multiple and .set_multiple Claudiu.Beznea
2019-09-11 0:27 ` Linus Walleij
2019-09-11 9:11 ` Alexandre Belloni
2019-09-12 13:46 ` Linus Walleij
2019-09-14 19:36 ` Ludovic Desroches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190905141304.22005-1-alexandre.belloni@bootlin.com \
--to=alexandre.belloni@bootlin.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ludovic.desroches@microchip.com \
--cc=nicolas.ferre@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox