public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* [PATCH v2 3/3] iio: accel: adxl372: Perform a reset at start up
@ 2019-09-10 14:44 Stefan Popa
  2019-09-15 13:33 ` Jonathan Cameron
  0 siblings, 1 reply; 2+ messages in thread
From: Stefan Popa @ 2019-09-10 14:44 UTC (permalink / raw)
  To: jic23
  Cc: Michael.Hennerich, knaack.h, lars, pmeerw, linux-kernel,
	linux-iio, stefan.popa

We need to perform a reset a start up to make sure that the chip is in a
consistent state. This reset also disables all the interrupts which
should only be enabled together with the iio buffer. Not doing this, was
sometimes causing unwanted interrupts to trigger.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
---
Changes in v2:
	- Instead of disabling the interrupts, now this patch performs
	  a software reset.

 drivers/iio/accel/adxl372.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/iio/accel/adxl372.c b/drivers/iio/accel/adxl372.c
index 33edca8..8a00528 100644
--- a/drivers/iio/accel/adxl372.c
+++ b/drivers/iio/accel/adxl372.c
@@ -575,6 +575,14 @@ static int adxl372_setup(struct adxl372_state *st)
 		return -ENODEV;
 	}
 
+	/*
+	 * Perform a software reset to make sure the device is in a consistent
+	 * state after start up.
+	 */
+	ret = regmap_write(st->regmap, ADXL372_RESET, ADXL372_RESET_CODE);
+	if (ret < 0)
+		return ret;
+
 	ret = adxl372_set_op_mode(st, ADXL372_STANDBY);
 	if (ret < 0)
 		return ret;
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2019-09-15 13:33 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-09-10 14:44 [PATCH v2 3/3] iio: accel: adxl372: Perform a reset at start up Stefan Popa
2019-09-15 13:33 ` Jonathan Cameron

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox