From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Saiyam Doshi <saiyamdoshi.in@gmail.com>
Cc: ludovic.desroches@microchip.com, ulf.hansson@linaro.org,
nicolas.ferre@microchip.com, linux-mmc@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] mmc: host: atmel-mci: assign false/true to bool variable
Date: Wed, 18 Sep 2019 20:01:12 +0200 [thread overview]
Message-ID: <20190918180112.GR21254@piout.net> (raw)
In-Reply-To: <20190918172823.GA28786@SD>
Hello,
On 18/09/2019 22:58:23+0530, Saiyam Doshi wrote:
> Use false/true instead of 0/1 in bool variable assignment.
>
> This fixes below coccicheck warning.
> "WARNING: Assignment of 0/1 to bool variable"
>
> Generated by: scripts/coccinelle/misc/boolinit.cocci
>
> More information about semantic patching is available at
> http://coccinelle.lip6.fr/
>
More useful than information than info on semantic patching, it would be
good to have info on why you feel this is necessary.
> Signed-off-by: Saiyam Doshi <saiyamdoshi.in@gmail.com>
> ---
> drivers/mmc/host/atmel-mci.c | 50 ++++++++++++++++++------------------
> 1 file changed, 25 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
> index c26fbe5f2222..91088b1712ae 100644
> --- a/drivers/mmc/host/atmel-mci.c
> +++ b/drivers/mmc/host/atmel-mci.c
> @@ -706,7 +706,7 @@ static void atmci_timeout_timer(struct timer_list *t)
> host->mrq->cmd->error = -ETIMEDOUT;
> host->cmd = NULL;
> }
> - host->need_reset = 1;
> + host->need_reset = true;
> host->state = STATE_END_REQUEST;
> smp_wmb();
> tasklet_schedule(&host->tasklet);
> @@ -1610,7 +1610,7 @@ static void atmci_command_complete(struct atmel_mci *host,
> else if (host->mrq->data && (host->mrq->data->blksz & 3)) {
> if (host->caps.need_blksz_mul_4) {
> cmd->error = -EINVAL;
> - host->need_reset = 1;
> + host->need_reset = true;
> }
> } else
> cmd->error = 0;
> @@ -2396,45 +2396,45 @@ static void atmci_get_cap(struct atmel_mci *host)
> dev_info(&host->pdev->dev,
> "version: 0x%x\n", version);
>
> - host->caps.has_dma_conf_reg = 0;
> - host->caps.has_pdc = 1;
> - host->caps.has_cfg_reg = 0;
> - host->caps.has_cstor_reg = 0;
> - host->caps.has_highspeed = 0;
> - host->caps.has_rwproof = 0;
> - host->caps.has_odd_clk_div = 0;
> - host->caps.has_bad_data_ordering = 1;
> - host->caps.need_reset_after_xfer = 1;
> - host->caps.need_blksz_mul_4 = 1;
> - host->caps.need_notbusy_for_read_ops = 0;
> + host->caps.has_dma_conf_reg = false;
> + host->caps.has_pdc = true;
> + host->caps.has_cfg_reg = false;
> + host->caps.has_cstor_reg = false;
> + host->caps.has_highspeed = false;
> + host->caps.has_rwproof = false;
> + host->caps.has_odd_clk_div = false;
> + host->caps.has_bad_data_ordering = true;
> + host->caps.need_reset_after_xfer = true;
> + host->caps.need_blksz_mul_4 = true;
> + host->caps.need_notbusy_for_read_ops = false;
>
> /* keep only major version number */
> switch (version & 0xf00) {
> case 0x600:
> case 0x500:
> - host->caps.has_odd_clk_div = 1;
> + host->caps.has_odd_clk_div = true;
> /* Fall through */
> case 0x400:
> case 0x300:
> - host->caps.has_dma_conf_reg = 1;
> - host->caps.has_pdc = 0;
> - host->caps.has_cfg_reg = 1;
> - host->caps.has_cstor_reg = 1;
> - host->caps.has_highspeed = 1;
> + host->caps.has_dma_conf_reg = true;
> + host->caps.has_pdc = false;
> + host->caps.has_cfg_reg = true;
> + host->caps.has_cstor_reg = true;
> + host->caps.has_highspeed = true;
> /* Fall through */
> case 0x200:
> - host->caps.has_rwproof = 1;
> - host->caps.need_blksz_mul_4 = 0;
> - host->caps.need_notbusy_for_read_ops = 1;
> + host->caps.has_rwproof = true;
> + host->caps.need_blksz_mul_4 = false;
> + host->caps.need_notbusy_for_read_ops = true;
> /* Fall through */
> case 0x100:
> - host->caps.has_bad_data_ordering = 0;
> - host->caps.need_reset_after_xfer = 0;
> + host->caps.has_bad_data_ordering = false;
> + host->caps.need_reset_after_xfer = false;
> /* Fall through */
> case 0x0:
> break;
> default:
> - host->caps.has_pdc = 0;
> + host->caps.has_pdc = false;
> dev_warn(&host->pdev->dev,
> "Unmanaged mci version, set minimum capabilities\n");
> break;
> --
> 2.20.1
>
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
next prev parent reply other threads:[~2019-09-18 18:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-18 17:28 [PATCH] mmc: host: atmel-mci: assign false/true to bool variable Saiyam Doshi
2019-09-18 18:01 ` Alexandre Belloni [this message]
2019-09-22 16:49 ` Saiyam Doshi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190918180112.GR21254@piout.net \
--to=alexandre.belloni@bootlin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=ludovic.desroches@microchip.com \
--cc=nicolas.ferre@microchip.com \
--cc=saiyamdoshi.in@gmail.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox