From: Dan Murphy <dmurphy@ti.com>
To: <jacek.anaszewski@gmail.com>, <pavel@ucw.cz>
Cc: <linux-leds@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Dan Murphy <dmurphy@ti.com>
Subject: [PATCH v8 3/9] dt: bindings: Add multicolor class dt bindings documention
Date: Fri, 20 Sep 2019 12:41:33 -0500 [thread overview]
Message-ID: <20190920174139.30079-4-dmurphy@ti.com> (raw)
In-Reply-To: <20190920174139.30079-1-dmurphy@ti.com>
Add DT bindings for the LEDs multicolor class framework.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
.../bindings/leds/leds-class-multicolor.txt | 95 +++++++++++++++++++
1 file changed, 95 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-class-multicolor.txt
diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.txt b/Documentation/devicetree/bindings/leds/leds-class-multicolor.txt
new file mode 100644
index 000000000000..215d3c90f351
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.txt
@@ -0,0 +1,95 @@
+* Multicolor LED properties
+
+Monochrome LEDs can grouped into LED clusters. These clusters can provide a
+visible output that have a wide range of colors and intensities.
+
+The nodes and properties defined in this document are unique to the multicolor
+LED class. Common LED nodes and properties are inherited from the common.txt
+within this documentation directory.
+
+Required LED Child properties:
+ - color : For multicolor LED support this property should be defined as
+ LED_COLOR_ID_MULTI and further definition can be found in
+ include/linux/leds/common.h.
+
+led-controller@30 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "ti,lp5024";
+ reg = <0x29>;
+
+ multi-led@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_STATUS;
+
+
+ led@3 {
+ reg = <3>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@5 {
+ reg = <5>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+
+ multi-led@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+ reg = <2>;
+ ti,led-bank = <2 3 5>;
+
+ led@6 {
+ reg = <0x6>;
+ color = <LED_COLOR_ID_RED>;
+ led-sources = <6 9 15>;
+ };
+
+ led@7 {
+ reg = <0x7>;
+ color = <LED_COLOR_ID_GREEN>;
+ led-sources = <7 10 16>;
+ };
+
+ led@8 {
+ reg = <0x8>;
+ color = <LED_COLOR_ID_BLUE>;
+ led-sources = <8 11 17>;
+ };
+ };
+
+ multi-led@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+
+ led@12 {
+ reg = <12>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@14 {
+ reg = <14>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+
+};
--
2.22.0.214.g8dca754b1e
next prev parent reply other threads:[~2019-09-20 17:38 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-20 17:41 [PATCH v8 0/9] Multicolor FW v8 update Dan Murphy
2019-09-20 17:41 ` [PATCH v8 1/9] leds: multicolor: Add sysfs interface definition Dan Murphy
2019-09-21 10:55 ` Jacek Anaszewski
2019-09-23 14:23 ` Dan Murphy
2019-09-20 17:41 ` [PATCH v8 2/9] documention: leds: Add multicolor class documentation Dan Murphy
2019-09-21 12:28 ` Jacek Anaszewski
2019-09-23 14:50 ` Dan Murphy
2019-09-23 21:21 ` Jacek Anaszewski
2019-09-20 17:41 ` Dan Murphy [this message]
2019-09-21 12:57 ` [PATCH v8 3/9] dt: bindings: Add multicolor class dt bindings documention Jacek Anaszewski
2019-09-23 14:52 ` Dan Murphy
2019-09-20 17:41 ` [PATCH v8 4/9] dt-bindings: leds: Add multicolor ID to the color ID list Dan Murphy
2019-09-21 12:58 ` Jacek Anaszewski
2019-09-20 17:41 ` [PATCH v8 5/9] " Dan Murphy
2019-09-21 12:59 ` Jacek Anaszewski
2019-09-20 17:41 ` [PATCH v8 6/9] leds: multicolor: Introduce a multicolor class definition Dan Murphy
2019-09-21 13:30 ` Jacek Anaszewski
2019-09-23 15:14 ` Dan Murphy
2019-09-23 21:36 ` Jacek Anaszewski
2019-09-21 18:08 ` Jacek Anaszewski
2019-09-23 15:11 ` Dan Murphy
2019-09-20 17:41 ` [PATCH v8 7/9] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers Dan Murphy
2019-09-21 15:13 ` Jacek Anaszewski
2019-09-23 15:28 ` Dan Murphy
2019-09-23 21:42 ` Jacek Anaszewski
2019-09-24 14:52 ` Dan Murphy
2019-09-20 17:41 ` [PATCH v8 8/9] leds: lp50xx: Add the LP50XX family of the RGB LED driver Dan Murphy
2019-09-21 15:11 ` Jacek Anaszewski
2019-09-23 17:56 ` Dan Murphy
2019-09-23 21:59 ` Jacek Anaszewski
2019-09-20 17:41 ` [PATCH v8 9/9] leds: Update the lp55xx to use the multi color framework Dan Murphy
2019-09-21 18:06 ` Jacek Anaszewski
[not found] ` <b3ba9d9f-5267-8184-e858-e09b4debcdb6@ti.com>
2019-09-23 22:13 ` Jacek Anaszewski
2019-09-22 8:29 ` kbuild test robot
2019-09-20 17:44 ` [PATCH v8 0/9] Multicolor FW v8 update Randy Dunlap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190920174139.30079-4-dmurphy@ti.com \
--to=dmurphy@ti.com \
--cc=jacek.anaszewski@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=pavel@ucw.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox