[RFT v3 6/8] ARM: dts: exynos: Remove MCT subnode for interrupt map on Exynos5250

[Krzysztof Kozlowski <krzk@kernel.org>]

Multi Core Timer node has interrupts routed to two different parents -
GIC and combiner.  This was modeled with a interrupt-map within a
subnode but can be expressed in an easier and more common way, directly
in the node itself.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Not tested.
---
 arch/arm/boot/dts/exynos5250.dtsi | 30 ++++++++++++------------------
 1 file changed, 12 insertions(+), 18 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 7a01349317a3..e0fcf3c2f537 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -233,28 +233,22 @@
 			power-domains = <&pd_mau>;
 		};
 
-		timer@101c0000 {
+		mct: timer@101c0000 {
 			compatible = "samsung,exynos4210-mct";
 			reg = <0x101C0000 0x800>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&mct_map>;
-			interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
-				     <4 0>, <5 0>;
 			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
 			clock-names = "fin_pll", "mct";
-
-			mct_map: mct-map {
-				#interrupt-cells = <2>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = <0x0 0 &combiner 23 3>,
-						<0x1 0 &combiner 23 4>,
-						<0x2 0 &combiner 25 2>,
-						<0x3 0 &combiner 25 3>,
-						<0x4 0 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>,
-						<0x5 0 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>;
-			};
+			#address-cells = <0>;
+			#size-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&mct>;
+			interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
+			interrupt-map = <0 &combiner 23 3>,
+					<1 &combiner 23 4>,
+					<2 &combiner 25 2>,
+					<3 &combiner 25 3>,
+					<4 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>,
+					<5 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_0: pinctrl@11400000 {
-- 
2.17.1