public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Nathan Chancellor <natechancellor@gmail.com>
To: Nick Desaulniers <ndesaulniers@google.com>
Cc: linux@roeck-us.net, clang-built-linux@googlegroups.com,
	jdelvare@suse.com, "Tomasz Paweł Gajc" <tpgxyz@gmail.com>,
	"Henrik Rydberg" <rydberg@bitmath.org>,
	linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] hwmon: (applesmc) fix UB and udelay overflow
Date: Tue, 24 Sep 2019 11:38:27 -0700	[thread overview]
Message-ID: <20190924183827.GA2800937@archlinux-threadripper> (raw)
In-Reply-To: <20190924174728.201464-1-ndesaulniers@google.com>

On Tue, Sep 24, 2019 at 10:47:28AM -0700, Nick Desaulniers wrote:
> Fixes the following 2 issues in the driver:
> 1. Left shifting a signed integer is undefined behavior. Unsigned
>    integral types should be used for bitwise operations.
> 2. The delay scales from 0x0010 to 0x20000 by powers of 2, but udelay
>    will result in a linkage failure when given a constant that's greater
>    than 20000 (0x4E20). Agressive loop unrolling can fully unroll the
>    loop, resulting in later iterations overflowing the call to udelay.
> 
> 2 is fixed via splitting the loop in two, iterating the first up to the
> point where udelay would overflow, then switching to mdelay, as
> suggested in Documentation/timers/timers-howto.rst.
> 
> Reported-by: Tomasz Paweł Gajc <tpgxyz@gmail.com>
> Link: https://github.com/ClangBuiltLinux/linux/issues/678
> Debugged-by: Nathan Chancellor <natechancellor@gmail.com>
> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
> ---
> Changes V1 -> V2:
> * The first loop in send_byte() needs to break out on the same condition
>   now. Technically, the loop condition could even be removed. The diff
>   looks funny because of the duplicated logic between existing and newly
>   added for loops.
> 
>  drivers/hwmon/applesmc.c | 35 +++++++++++++++++++++++++++++++----
>  1 file changed, 31 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
> index 183ff3d25129..c76adb504dff 100644
> --- a/drivers/hwmon/applesmc.c
> +++ b/drivers/hwmon/applesmc.c
> @@ -46,6 +46,7 @@
>  #define APPLESMC_MIN_WAIT	0x0010
>  #define APPLESMC_RETRY_WAIT	0x0100
>  #define APPLESMC_MAX_WAIT	0x20000
> +#define APPLESMC_UDELAY_MAX	20000
>  
>  #define APPLESMC_READ_CMD	0x10
>  #define APPLESMC_WRITE_CMD	0x11
> @@ -157,14 +158,23 @@ static struct workqueue_struct *applesmc_led_wq;
>  static int wait_read(void)
>  {
>  	u8 status;
> -	int us;
> -	for (us = APPLESMC_MIN_WAIT; us < APPLESMC_MAX_WAIT; us <<= 1) {
> +	unsigned int us;
> +
> +	for (us = APPLESMC_MIN_WAIT; us < APPLESMC_UDELAY_MAX; us <<= 1) {
>  		udelay(us);
>  		status = inb(APPLESMC_CMD_PORT);
>  		/* read: wait for smc to settle */
>  		if (status & 0x01)
>  			return 0;
>  	}
> +	/* switch to mdelay for longer sleeps */
> +	for (; us < APPLESMC_MAX_WAIT; us <<= 1) {
> +		mdelay(us);
> +		status = inb(APPLESMC_CMD_PORT);
> +		/* read: wait for smc to settle */
> +		if (status & 0x01)
> +			return 0;
> +	}
>  
>  	pr_warn("wait_read() fail: 0x%02x\n", status);
>  	return -EIO;
> @@ -177,10 +187,10 @@ static int wait_read(void)
>  static int send_byte(u8 cmd, u16 port)
>  {
>  	u8 status;
> -	int us;
> +	unsigned int us;
>  
>  	outb(cmd, port);
> -	for (us = APPLESMC_MIN_WAIT; us < APPLESMC_MAX_WAIT; us <<= 1) {
> +	for (us = APPLESMC_MIN_WAIT; us < APPLESMC_UDELAY_MAX; us <<= 1) {
>  		udelay(us);
>  		status = inb(APPLESMC_CMD_PORT);
>  		/* write: wait for smc to settle */
> @@ -190,6 +200,23 @@ static int send_byte(u8 cmd, u16 port)
>  		if (status & 0x04)
>  			return 0;
>  		/* timeout: give up */
> +		if (us << 1 == APPLESMC_UDELAY_MAX)
> +			break;
> +		/* busy: long wait and resend */
> +		udelay(APPLESMC_RETRY_WAIT);
> +		outb(cmd, port);
> +	}
> +	/* switch to mdelay for longer sleeps */
> +	for (; us < APPLESMC_MAX_WAIT; us <<= 1) {
> +		mdelay(us);
> +		status = inb(APPLESMC_CMD_PORT);
> +		/* write: wait for smc to settle */
> +		if (status & 0x02)
> +			continue;
> +		/* ready: cmd accepted, return */
> +		if (status & 0x04)
> +			return 0;
> +		/* timeout: give up */
>  		if (us << 1 == APPLESMC_MAX_WAIT)
>  			break;
>  		/* busy: long wait and resend */
> -- 
> 2.23.0.351.gc4317032e6-goog
> 

This resolves the __bad_udelay appearance at -O3 for me. I am not
familiar enough with this code to give a reviewed by though!

Also, for some odd reason, I couldn't apply your patch with 'git apply':

% curl -LSs https://lore.kernel.org/lkml/20190924174728.201464-1-ndesaulniers@google.com/raw | git apply
error: corrupt patch at line 117

It looks like some of the '=' got changed into =3D and some spaces got
changed into =20. Weird encoding glitch?

Cheers,
Nathan

  reply	other threads:[~2019-09-24 18:38 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-24 17:37 [PATCH] hwmon: (applesmc) fix UB and udelay overflow Nick Desaulniers
2019-09-24 17:42 ` Nick Desaulniers
2019-09-24 17:47   ` [PATCH v2] " Nick Desaulniers
2019-09-24 18:38     ` Nathan Chancellor [this message]
2019-09-24 19:36       ` Nick Desaulniers
2019-09-24 19:41         ` Nathan Chancellor
2019-09-30 21:46     ` Cengiz Can
2019-10-01  0:01     ` Guenter Roeck
2019-10-02 21:43       ` Nick Desaulniers
2019-10-03  1:17         ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190924183827.GA2800937@archlinux-threadripper \
    --to=natechancellor@gmail.com \
    --cc=clang-built-linux@googlegroups.com \
    --cc=jdelvare@suse.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=ndesaulniers@google.com \
    --cc=rydberg@bitmath.org \
    --cc=tpgxyz@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox