linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sean Christopherson <sean.j.christopherson@intel.com>
To: Liran Alon <liran.alon@oracle.com>
Cc: "Paolo Bonzini" <pbonzini@redhat.com>,
	"Radim Krčmář" <rkrcmar@redhat.com>,
	"Vitaly Kuznetsov" <vkuznets@redhat.com>,
	"Wanpeng Li" <wanpengli@tencent.com>,
	"Jim Mattson" <jmattson@google.com>,
	"Joerg Roedel" <joro@8bytes.org>,
	kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Reto Buerki" <reet@codelabs.ch>
Subject: Re: [PATCH 1/2] KVM: nVMX: Always write vmcs02.GUEST_CR3 during nested VM-Enter
Date: Fri, 27 Sep 2019 07:27:25 -0700	[thread overview]
Message-ID: <20190927142725.GC24889@linux.intel.com> (raw)
In-Reply-To: <68340081-0094-4A74-9B33-3431F39659AA@oracle.com>

On Fri, Sep 27, 2019 at 03:06:02AM +0300, Liran Alon wrote:
> 
> 
> > On 27 Sep 2019, at 0:43, Sean Christopherson <sean.j.christopherson@intel.com> wrote:
> > 
> > Write the desired L2 CR3 into vmcs02.GUEST_CR3 during nested VM-Enter
> > isntead of deferring the VMWRITE until vmx_set_cr3().  If the VMWRITE
> > is deferred, then KVM can consume a stale vmcs02.GUEST_CR3 when it
> > refreshes vmcs12->guest_cr3 during nested_vmx_vmexit() if the emulated
> > VM-Exit occurs without actually entering L2, e.g. if the nested run
> > is squashed because L2 is being put into HLT.
> 
> I would rephrase to “If an emulated VMEntry is squashed because L1 sets
> vmcs12->guest_activity_state to HLT”.  I think it’s a bit more explicit.
> 
> > 
> > In an ideal world where EPT *requires* unrestricted guest (and vice
> > versa), VMX could handle CR3 similar to how it handles RSP and RIP,
> > e.g. mark CR3 dirty and conditionally load it at vmx_vcpu_run().  But
> > the unrestricted guest silliness complicates the dirty tracking logic
> > to the point that explicitly handling vmcs02.GUEST_CR3 during nested
> > VM-Enter is a simpler overall implementation.
> > 
> > Cc: stable@vger.kernel.org
> > Reported-by: Reto Buerki <reet@codelabs.ch>
> > Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
> > ---
> > arch/x86/kvm/vmx/nested.c | 8 ++++++++
> > arch/x86/kvm/vmx/vmx.c    | 9 ++++++---
> > 2 files changed, 14 insertions(+), 3 deletions(-)
> > 
> > diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
> > index 41abc62c9a8a..971a24134081 100644
> > --- a/arch/x86/kvm/vmx/nested.c
> > +++ b/arch/x86/kvm/vmx/nested.c
> > @@ -2418,6 +2418,14 @@ static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12,
> > 				entry_failure_code))
> > 		return -EINVAL;
> > 
> > +	/*
> > +	 * Immediately write vmcs02.GUEST_CR3.  It will be propagated to vmcs12
> > +	 * on nested VM-Exit, which can occur without actually running L2, e.g.
> > +	 * if L2 is entering HLT state, and thus without hitting vmx_set_cr3().
> > +	 */
> 
> If I understand correctly, it’s not exactly if L2 is entering HLT state in
> general.  (E.g. issue doesn’t occur if L2 runs HLT directly which is not
> configured to be intercepted by vmcs12).  It’s specifically when L1 enters L2
> with a HLT guest-activity-state. I suggest rephrasing comment.

I deliberately worded the comment so that it remains valid if there are
more conditions in the future that cause KVM to skip running L2.  What if
I split the difference and make the changelog more explicit, but leave the
comment as is?

> > +	if (enable_ept)
> > +		vmcs_writel(GUEST_CR3, vmcs12->guest_cr3);
> > +
> > 	/* Late preparation of GUEST_PDPTRs now that EFER and CRs are set. */
> > 	if (load_guest_pdptrs_vmcs12 && nested_cpu_has_ept(vmcs12) &&
> > 	    is_pae_paging(vcpu)) {
> > diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
> > index d4575ffb3cec..b530950a9c2b 100644
> > --- a/arch/x86/kvm/vmx/vmx.c
> > +++ b/arch/x86/kvm/vmx/vmx.c
> > @@ -2985,6 +2985,7 @@ void vmx_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
> > {
> > 	struct kvm *kvm = vcpu->kvm;
> > 	unsigned long guest_cr3;
> > +	bool skip_cr3 = false;
> > 	u64 eptp;
> > 
> > 	guest_cr3 = cr3;
> > @@ -3000,15 +3001,17 @@ void vmx_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
> > 			spin_unlock(&to_kvm_vmx(kvm)->ept_pointer_lock);
> > 		}
> > 
> > -		if (enable_unrestricted_guest || is_paging(vcpu) ||
> > -		    is_guest_mode(vcpu))
> > +		if (is_guest_mode(vcpu))
> > +			skip_cr3 = true;
> > +		else if (enable_unrestricted_guest || is_paging(vcpu))
> > 			guest_cr3 = kvm_read_cr3(vcpu);
> > 		else
> > 			guest_cr3 = to_kvm_vmx(kvm)->ept_identity_map_addr;
> > 		ept_load_pdptrs(vcpu);
> > 	}
> > 
> > -	vmcs_writel(GUEST_CR3, guest_cr3);
> > +	if (!skip_cr3)
> 
> Nit: It’s a matter of taste, but I prefer positive conditions. i.e. “bool
> write_guest_cr3”.
> 
> Anyway, code seems valid to me. Nice catch.
> Reviewed-by: Liran Alon <liran.alon@oracle.com>
> 
> -Liran
> 
> > +		vmcs_writel(GUEST_CR3, guest_cr3);
> > }
> > 
> > int vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
> > -- 
> > 2.22.0
> > 
> 

  reply	other threads:[~2019-09-27 14:27 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-26 21:43 [PATCH 0/2] KVM: nVMX: Bug fix for consuming stale vmcs02.GUEST_CR3 Sean Christopherson
2019-09-26 21:43 ` [PATCH 1/2] KVM: nVMX: Always write vmcs02.GUEST_CR3 during nested VM-Enter Sean Christopherson
2019-09-26 23:39   ` Jim Mattson
2019-09-27 14:22     ` Sean Christopherson
2019-09-27  0:06   ` Liran Alon
2019-09-27 14:27     ` Sean Christopherson [this message]
2019-09-27 14:44       ` Liran Alon
2019-09-27 15:02         ` Sean Christopherson
2019-09-26 21:43 ` [PATCH 2/2] KVM: VMX: Skip GUEST_CR3 VMREAD+VMWRITE if the VMCS is up-to-date Sean Christopherson
2019-09-27 12:11   ` Vitaly Kuznetsov
2019-09-27 14:24     ` Sean Christopherson
2019-09-27  7:45 ` [PATCH 0/2] KVM: nVMX: Bug fix for consuming stale vmcs02.GUEST_CR3 Reto Buerki
2019-09-27 12:12 ` Vitaly Kuznetsov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190927142725.GC24889@linux.intel.com \
    --to=sean.j.christopherson@intel.com \
    --cc=jmattson@google.com \
    --cc=joro@8bytes.org \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=liran.alon@oracle.com \
    --cc=pbonzini@redhat.com \
    --cc=reet@codelabs.ch \
    --cc=rkrcmar@redhat.com \
    --cc=vkuznets@redhat.com \
    --cc=wanpengli@tencent.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).