From: "james qian wang (Arm Technology China)" <james.qian.wang@arm.com>
To: "Lowry Li (Arm Technology China)" <Lowry.Li@arm.com>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>,
"maarten.lankhorst@linux.intel.com"
<maarten.lankhorst@linux.intel.com>,
"seanpaul@chromium.org" <seanpaul@chromium.org>,
"airlied@linux.ie" <airlied@linux.ie>,
Brian Starkey <Brian.Starkey@arm.com>,
Mihail Atanassov <Mihail.Atanassov@arm.com>,
Ayan Halder <Ayan.Halder@arm.com>,
"Jonathan Chai (Arm Technology China)" <Jonathan.Chai@arm.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"dri-devel@lists.freedesktop.org"
<dri-devel@lists.freedesktop.org>,
"Julien Yin (Arm Technology China)" <Julien.Yin@arm.com>,
nd <nd@arm.com>
Subject: Re: drm/komeda: Adds output-color format support
Date: Wed, 16 Oct 2019 08:20:11 +0000 [thread overview]
Message-ID: <20191016082002.GA18432@jamwan02-TSP300> (raw)
In-Reply-To: <20191015091019.26021-1-lowry.li@arm.com>
On Tue, Oct 15, 2019 at 09:10:36AM +0000, Lowry Li (Arm Technology China) wrote:
> Sets output color format according to the connector formats and
> display supported formats. Default value is RGB444 and only force
> YUV format which must be YUV.
>
> Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
> ---
> .../drm/arm/display/komeda/d71/d71_component.c | 14 +++++++++++++-
> .../gpu/drm/arm/display/komeda/komeda_crtc.c | 9 ++++++++-
> drivers/gpu/drm/arm/display/komeda/komeda_kms.h | 2 +-
> .../drm/arm/display/komeda/komeda_pipeline.h | 2 +-
> .../arm/display/komeda/komeda_pipeline_state.c | 17 ++++++++++++++---
> .../arm/display/komeda/komeda_wb_connector.c | 1 +
> 6 files changed, 38 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
> index 27cdb03573c1..7b374a3b911e 100644
> --- a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
> +++ b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
> @@ -944,7 +944,7 @@ static void d71_improc_update(struct komeda_component *c,
> {
> struct komeda_improc_state *st = to_improc_st(state);
> u32 __iomem *reg = c->reg;
> - u32 index;
> + u32 index, mask = 0, ctrl = 0;
>
> for_each_changed_input(state, index)
> malidp_write32(reg, BLK_INPUT_ID0 + index * 4,
> @@ -952,6 +952,18 @@ static void d71_improc_update(struct komeda_component *c,
>
> malidp_write32(reg, BLK_SIZE, HV_SIZE(st->hsize, st->vsize));
> malidp_write32(reg, IPS_DEPTH, st->color_depth);
> +
> + mask |= IPS_CTRL_YUV | IPS_CTRL_CHD422 | IPS_CTRL_CHD420;
> +
> + /* config color format */
> + if (st->color_format == DRM_COLOR_FORMAT_YCRCB420)
> + ctrl |= IPS_CTRL_YUV | IPS_CTRL_CHD422 | IPS_CTRL_CHD420;
> + else if (st->color_format == DRM_COLOR_FORMAT_YCRCB422)
> + ctrl |= IPS_CTRL_YUV | IPS_CTRL_CHD422;
> + else if (st->color_format == DRM_COLOR_FORMAT_YCRCB444)
> + ctrl |= IPS_CTRL_YUV;
> +
> + malidp_write32_mask(reg, BLK_CONTROL, mask, ctrl);
> }
>
> static void d71_improc_dump(struct komeda_component *c, struct seq_file *sf)
> diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c b/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c
> index fe295c4fca71..c9b8d2d5e195 100644
> --- a/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c
> +++ b/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c
> @@ -18,10 +18,11 @@
> #include "komeda_kms.h"
>
> void komeda_crtc_get_color_config(struct drm_crtc_state *crtc_st,
> - u32 *color_depths)
> + u32 *color_depths, u32 *color_formats)
> {
> struct drm_connector *conn;
> struct drm_connector_state *conn_st;
> + u32 conn_color_formats = ~0u;
> int i, min_bpc = 31, conn_bpc = 0;
>
> for_each_new_connector_in_state(crtc_st->state, conn, conn_st, i) {
> @@ -29,12 +30,18 @@ void komeda_crtc_get_color_config(struct drm_crtc_state *crtc_st,
> continue;
>
> conn_bpc = conn->display_info.bpc ? conn->display_info.bpc : 8;
> + conn_color_formats &= conn->display_info.color_formats;
>
> if (conn_bpc < min_bpc)
> min_bpc = conn_bpc;
> }
>
> + /* connector doesn't config any color_format, use RGB444 as default */
> + if (!conn_color_formats)
> + conn_color_formats = DRM_COLOR_FORMAT_RGB444;
> +
> *color_depths = GENMASK(min_bpc, 0);
> + *color_formats = conn_color_formats;
> }
>
> static void komeda_crtc_update_clock_ratio(struct komeda_crtc_state *kcrtc_st)
> diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_kms.h b/drivers/gpu/drm/arm/display/komeda/komeda_kms.h
> index a42503451b5d..456f3c435719 100644
> --- a/drivers/gpu/drm/arm/display/komeda/komeda_kms.h
> +++ b/drivers/gpu/drm/arm/display/komeda/komeda_kms.h
> @@ -167,7 +167,7 @@ static inline bool has_flip_h(u32 rot)
> }
>
> void komeda_crtc_get_color_config(struct drm_crtc_state *crtc_st,
> - u32 *color_depths);
> + u32 *color_depths, u32 *color_formats);
> unsigned long komeda_crtc_get_aclk(struct komeda_crtc_state *kcrtc_st);
>
> int komeda_kms_setup_crtcs(struct komeda_kms_dev *kms, struct komeda_dev *mdev);
> diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h
> index 7653f134a8eb..c0f53b19b62d 100644
> --- a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h
> +++ b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h
> @@ -323,7 +323,7 @@ struct komeda_improc {
>
> struct komeda_improc_state {
> struct komeda_component_state base;
> - u8 color_depth;
> + u8 color_format, color_depth;
> u16 hsize, vsize;
> };
>
> diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
> index e64bfeaa06c7..948d1951c8eb 100644
> --- a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
> +++ b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
> @@ -758,10 +758,11 @@ komeda_improc_validate(struct komeda_improc *improc,
> st->vsize = dflow->in_h;
>
> if (drm_atomic_crtc_needs_modeset(crtc_st)) {
> - u32 output_depths;
> - u32 avail_depths;
> + u32 output_depths, output_formats;
> + u32 avail_depths, avail_formats;
>
> - komeda_crtc_get_color_config(crtc_st, &output_depths);
> + komeda_crtc_get_color_config(crtc_st, &output_depths,
> + &output_formats);
>
> avail_depths = output_depths & improc->supported_color_depths;
> if (avail_depths == 0) {
> @@ -771,7 +772,17 @@ komeda_improc_validate(struct komeda_improc *improc,
> return -EINVAL;
> }
>
> + avail_formats = output_formats &
> + improc->supported_color_formats;
> + if (!avail_formats) {
> + DRM_DEBUG_ATOMIC("No available color_formats, conn formats 0x%x & display: 0x%x\n",
> + output_formats,
> + improc->supported_color_formats);
> + return -EINVAL;
> + }
> +
> st->color_depth = __fls(avail_depths);
> + st->color_format = BIT(__ffs(avail_formats));
> }
>
> komeda_component_add_input(&st->base, &dflow->input, 0);
> diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c b/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c
> index 740a81250630..abfa587db189 100644
> --- a/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c
> +++ b/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c
> @@ -174,6 +174,7 @@ static int komeda_wb_connector_add(struct komeda_kms_dev *kms,
>
> info = &kwb_conn->base.base.display_info;
> info->bpc = __fls(kcrtc->master->improc->supported_color_depths);
> + info->color_formats = kcrtc->master->improc->supported_color_formats;
>
> kcrtc->wb_conn = kwb_conn;
>
Looks good to me.
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
prev parent reply other threads:[~2019-10-16 8:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-15 9:10 [PATCH] drm/komeda: Adds output-color format support Lowry Li (Arm Technology China)
2019-10-16 8:20 ` james qian wang (Arm Technology China) [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191016082002.GA18432@jamwan02-TSP300 \
--to=james.qian.wang@arm.com \
--cc=Ayan.Halder@arm.com \
--cc=Brian.Starkey@arm.com \
--cc=Jonathan.Chai@arm.com \
--cc=Julien.Yin@arm.com \
--cc=Liviu.Dudau@arm.com \
--cc=Lowry.Li@arm.com \
--cc=Mihail.Atanassov@arm.com \
--cc=airlied@linux.ie \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=nd@arm.com \
--cc=seanpaul@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox