[PATCH 00/13] PHY: Add support for SERDES in TI's J721E SoC

[Kishon Vijay Abraham I <kishon@ti.com>]

TI's J721E SoC uses Cadence Sierra SERDES for USB, PCIe and SGMII.
TI has a wrapper named WIZ to control input signals to Sierra and
Torrent SERDES.

This patch series:
 1) Add support to WIZ module present in TI's J721E SoC
 2) Adapt Cadence Sierra PHY driver to be used for J721E SoC

Anil Varughese (1):
  phy: cadence: Sierra: Configure both lane cdb and common cdb registers
    for external SSC

Kishon Vijay Abraham I (12):
  dt-bindings: phy: Sierra: Add bindings for Sierra in TI's J721E
  phy: cadence: Sierra: Make "phy_clk" and "sierra_apb" optional
    resources
  phy: cadence: Sierra: Use "regmap" for read and write to Sierra
    registers
  phy: cadence: Sierra: Add support for SERDES_16G used in J721E SoC
  phy: cadence: Sierra: Make cdns_sierra_phy_init() as phy_ops
  phy: cadence: Sierra: Modify register macro names to be in sync with
    Sierra user guide
  phy: cadence: Sierra: Get reset control "array" for each link
  phy: cadence: Sierra: Check for PLL lock during PHY power on
  phy: cadence: Sierra: Change MAX_LANES of Sierra to 16
  phy: cadence: Sierra: Set cmn_refclk/cmn_refclk1 frequency to 25MHz
  dt-bindings: phy: Document WIZ (SERDES wrapper) bindings
  phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC

 .../bindings/phy/phy-cadence-sierra.txt       |  13 +-
 .../bindings/phy/ti,phy-j721e-wiz.txt         |  95 ++
 drivers/phy/cadence/phy-cadence-sierra.c      | 695 +++++++++++---
 drivers/phy/ti/Kconfig                        |  15 +
 drivers/phy/ti/Makefile                       |   1 +
 drivers/phy/ti/phy-j721e-wiz.c                | 904 ++++++++++++++++++
 6 files changed, 1585 insertions(+), 138 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.txt
 create mode 100644 drivers/phy/ti/phy-j721e-wiz.c

-- 
2.17.1