* [PATCH v3] dt-bindings: sound: Convert Samsung Exynos5433 TM2(E) audio complex with WM5110 codec to dt-schema [not found] <CGME20191017100514eucas1p2e189e26e887c9cdd2209357c91846641@eucas1p2.samsung.com> @ 2019-10-17 10:05 ` Marek Szyprowski 2019-10-17 18:56 ` Rob Herring 0 siblings, 1 reply; 2+ messages in thread From: Marek Szyprowski @ 2019-10-17 10:05 UTC (permalink / raw) To: devicetree, alsa-devel, linux-kernel, linux-samsung-soc Cc: Marek Szyprowski, Mark Brown, Sylwester Nawrocki, Liam Girdwood, Rob Herring, Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz, Maciej Falkowski From: Maciej Falkowski <m.falkowski@samsung.com> Convert Samsung Exynos5433 TM2(E) audio complex with WM5110 codec to newer dt-schema format. Signed-off-by: Maciej Falkowski <m.falkowski@samsung.com> [mszyprow: reordered non-standard properties, added list of values for widgets, minor other fixes] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- .../bindings/sound/samsung,tm2-audio.txt | 42 -------- .../bindings/sound/samsung,tm2-audio.yaml | 99 +++++++++++++++++++ 2 files changed, 99 insertions(+), 42 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt create mode 100644 Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt deleted file mode 100644 index f5ccc12ddc00..000000000000 --- a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt +++ /dev/null @@ -1,42 +0,0 @@ -Samsung Exynos5433 TM2(E) audio complex with WM5110 codec - -Required properties: - - - compatible : "samsung,tm2-audio" - - model : the user-visible name of this sound complex - - audio-codec : the first entry should be phandle of the wm5110 audio - codec node, as described in ../mfd/arizona.txt; - the second entry should be phandle of the HDMI - transmitter node - - i2s-controller : the list of phandle and argument tuples pointing to - I2S controllers, the first entry should be I2S0 and - the second one I2S1 - - audio-amplifier : the phandle of the MAX98504 amplifier - - samsung,audio-routing : a list of the connections between audio components; - each entry is a pair of strings, the first being the - connection's sink, the second being the connection's - source; valid names for sources and sinks are the - WM5110's and MAX98504's pins and the jacks on the - board: HP, SPK, Main Mic, Sub Mic, Third Mic, - Headset Mic - - mic-bias-gpios : GPIO pin that enables the Main Mic bias regulator - - -Example: - -sound { - compatible = "samsung,tm2-audio"; - audio-codec = <&wm5110>, <&hdmi>; - i2s-controller = <&i2s0 0>, <&i2s1 0>; - audio-amplifier = <&max98504>; - mic-bias-gpios = <&gpr3 2 0>; - model = "wm5110"; - samsung,audio-routing = - "HP", "HPOUT1L", - "HP", "HPOUT1R", - "SPK", "SPKOUT", - "SPKOUT", "HPOUT2L", - "SPKOUT", "HPOUT2R", - "Main Mic", "MICBIAS2", - "IN1R", "Main Mic"; -}; diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml new file mode 100644 index 000000000000..c9178d928ad4 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/samsung,tm2-audio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC Exynos5433 TM2(E) audio complex with WM5110 codec + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + +properties: + compatible: + const: samsung,tm2-audio + + model: + $ref: /schemas/types.yaml#/definitions/string + description: The user-visible name of this sound complex. + + i2s-controller: + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle-array + - items: + - description: phandle of the I2S0. + - description: phandle of the I2S1. + + audio-codec: + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle-array + - items: + - description: | + phandle of the wm5110 audio codec node, + as described in ../mfd/arizona.txt; + - description: phandle of the HDMI transmitter node. + + audio-amplifier: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle of the MAX98504 amplifier. + + mic-bias-gpios: + description: GPIO pin that enables the Main Mic bias regulator. + maxItems: 1 + + samsung,audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: | + List of the connections between audio components. + Each entry is a pair of strings, the first being the + connection's sink, the second being the connection's + source. Valid names for sources and sinks are: + the WM5110's pins: + "HPOUT1L", + "HPOUT1R", + "HPOUT2L", + "HPOUT2R", + "HPOUT3L", + "HPOUT3R", + MAX98504's pins: + "SPKOUT" + and the jacks on the board: + "HP", + "SPK", + "RCV", + "Main Mic", + "Sub Mic", + "Third Mic", + "Headset Mic". + +required: + - compatible + - model + - i2s-controller + - audio-codec + - audio-amplifier + - mic-bias-gpios + - samsung,audio-routing + +additionalProperties: false + +examples: + - | + sound { + compatible = "samsung,tm2-audio"; + model = "wm5110"; + i2s-controller = <&i2s0 0>, <&i2s1 0>; + audio-codec = <&wm5110>, <&hdmi>; + audio-amplifier = <&max98504>; + mic-bias-gpios = <&gpr3>; + samsung,audio-routing = + "HP", "HPOUT1L", + "HP", "HPOUT1R", + "SPK", "SPKOUT", + "SPKOUT", "HPOUT2L", + "SPKOUT", "HPOUT2R", + "Main Mic", "MICBIAS2", + "IN1R", "Main Mic"; + }; + -- 2.17.1 ^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v3] dt-bindings: sound: Convert Samsung Exynos5433 TM2(E) audio complex with WM5110 codec to dt-schema 2019-10-17 10:05 ` [PATCH v3] dt-bindings: sound: Convert Samsung Exynos5433 TM2(E) audio complex with WM5110 codec to dt-schema Marek Szyprowski @ 2019-10-17 18:56 ` Rob Herring 0 siblings, 0 replies; 2+ messages in thread From: Rob Herring @ 2019-10-17 18:56 UTC (permalink / raw) To: Marek Szyprowski Cc: devicetree, alsa-devel, linux-kernel, linux-samsung-soc, Mark Brown, Sylwester Nawrocki, Liam Girdwood, Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz, Maciej Falkowski On Thu, Oct 17, 2019 at 12:05:06PM +0200, Marek Szyprowski wrote: > From: Maciej Falkowski <m.falkowski@samsung.com> > > Convert Samsung Exynos5433 TM2(E) audio complex with WM5110 codec to > newer dt-schema format. > > Signed-off-by: Maciej Falkowski <m.falkowski@samsung.com> > [mszyprow: reordered non-standard properties, added list of values > for widgets, minor other fixes] > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > .../bindings/sound/samsung,tm2-audio.txt | 42 -------- > .../bindings/sound/samsung,tm2-audio.yaml | 99 +++++++++++++++++++ > 2 files changed, 99 insertions(+), 42 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt > create mode 100644 Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml > > diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt > deleted file mode 100644 > index f5ccc12ddc00..000000000000 > --- a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt > +++ /dev/null > @@ -1,42 +0,0 @@ > -Samsung Exynos5433 TM2(E) audio complex with WM5110 codec > - > -Required properties: > - > - - compatible : "samsung,tm2-audio" > - - model : the user-visible name of this sound complex > - - audio-codec : the first entry should be phandle of the wm5110 audio > - codec node, as described in ../mfd/arizona.txt; > - the second entry should be phandle of the HDMI > - transmitter node > - - i2s-controller : the list of phandle and argument tuples pointing to > - I2S controllers, the first entry should be I2S0 and > - the second one I2S1 > - - audio-amplifier : the phandle of the MAX98504 amplifier > - - samsung,audio-routing : a list of the connections between audio components; > - each entry is a pair of strings, the first being the > - connection's sink, the second being the connection's > - source; valid names for sources and sinks are the > - WM5110's and MAX98504's pins and the jacks on the > - board: HP, SPK, Main Mic, Sub Mic, Third Mic, > - Headset Mic > - - mic-bias-gpios : GPIO pin that enables the Main Mic bias regulator > - > - > -Example: > - > -sound { > - compatible = "samsung,tm2-audio"; > - audio-codec = <&wm5110>, <&hdmi>; > - i2s-controller = <&i2s0 0>, <&i2s1 0>; > - audio-amplifier = <&max98504>; > - mic-bias-gpios = <&gpr3 2 0>; > - model = "wm5110"; > - samsung,audio-routing = > - "HP", "HPOUT1L", > - "HP", "HPOUT1R", > - "SPK", "SPKOUT", > - "SPKOUT", "HPOUT2L", > - "SPKOUT", "HPOUT2R", > - "Main Mic", "MICBIAS2", > - "IN1R", "Main Mic"; > -}; > diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml > new file mode 100644 > index 000000000000..c9178d928ad4 > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.yaml > @@ -0,0 +1,99 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/sound/samsung,tm2-audio.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Samsung Exynos SoC Exynos5433 TM2(E) audio complex with WM5110 codec > + > +maintainers: > + - Krzysztof Kozlowski <krzk@kernel.org> > + - Sylwester Nawrocki <s.nawrocki@samsung.com> > + > +properties: > + compatible: > + const: samsung,tm2-audio > + > + model: > + $ref: /schemas/types.yaml#/definitions/string > + description: The user-visible name of this sound complex. > + > + i2s-controller: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/phandle-array > + - items: > + - description: phandle of the I2S0. > + - description: phandle of the I2S1. > + > + audio-codec: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/phandle-array > + - items: > + - description: | > + phandle of the wm5110 audio codec node, > + as described in ../mfd/arizona.txt; > + - description: phandle of the HDMI transmitter node. > + > + audio-amplifier: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: phandle of the MAX98504 amplifier. > + > + mic-bias-gpios: > + description: GPIO pin that enables the Main Mic bias regulator. > + maxItems: 1 > + > + samsung,audio-routing: > + $ref: /schemas/types.yaml#/definitions/non-unique-string-array > + description: | > + List of the connections between audio components. > + Each entry is a pair of strings, the first being the > + connection's sink, the second being the connection's > + source. Valid names for sources and sinks are: > + the WM5110's pins: > + "HPOUT1L", > + "HPOUT1R", > + "HPOUT2L", > + "HPOUT2R", > + "HPOUT3L", > + "HPOUT3R", > + MAX98504's pins: > + "SPKOUT" > + and the jacks on the board: > + "HP", > + "SPK", > + "RCV", > + "Main Mic", > + "Sub Mic", > + "Third Mic", > + "Headset Mic". All these strings can be a schema. > + > +required: > + - compatible > + - model > + - i2s-controller > + - audio-codec > + - audio-amplifier > + - mic-bias-gpios > + - samsung,audio-routing > + > +additionalProperties: false > + > +examples: > + - | > + sound { > + compatible = "samsung,tm2-audio"; > + model = "wm5110"; > + i2s-controller = <&i2s0 0>, <&i2s1 0>; > + audio-codec = <&wm5110>, <&hdmi>; > + audio-amplifier = <&max98504>; > + mic-bias-gpios = <&gpr3>; > + samsung,audio-routing = > + "HP", "HPOUT1L", > + "HP", "HPOUT1R", > + "SPK", "SPKOUT", > + "SPKOUT", "HPOUT2L", > + "SPKOUT", "HPOUT2R", > + "Main Mic", "MICBIAS2", > + "IN1R", "Main Mic"; > + }; > + > -- > 2.17.1 > ^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-10-17 18:56 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <CGME20191017100514eucas1p2e189e26e887c9cdd2209357c91846641@eucas1p2.samsung.com>
2019-10-17 10:05 ` [PATCH v3] dt-bindings: sound: Convert Samsung Exynos5433 TM2(E) audio complex with WM5110 codec to dt-schema Marek Szyprowski
2019-10-17 18:56 ` Rob Herring
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox