From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-9.8 required=3.0 tests=HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS, USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id CAFA6CA9EA0 for ; Fri, 18 Oct 2019 15:29:38 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id A91E6222BD for ; Fri, 18 Oct 2019 15:29:38 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2410508AbfJRP3h (ORCPT ); Fri, 18 Oct 2019 11:29:37 -0400 Received: from relay12.mail.gandi.net ([217.70.178.232]:48873 "EHLO relay12.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2393138AbfJRP3h (ORCPT ); Fri, 18 Oct 2019 11:29:37 -0400 Received: from localhost (aclermont-ferrand-651-1-259-53.w86-207.abo.wanadoo.fr [86.207.98.53]) (Authenticated sender: gregory.clement@bootlin.com) by relay12.mail.gandi.net (Postfix) with ESMTPSA id A7A76200004; Fri, 18 Oct 2019 15:29:33 +0000 (UTC) From: Gregory CLEMENT To: Mark Brown , linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Nicolas Ferre , Alexandre Belloni , Ludovic Desroches , linux-arm-kernel@lists.infradead.org, Thomas Petazzoni , Gregory CLEMENT , stable@vger.kernel.org Subject: [PATCH] spi: Fix SPI_CS_HIGH setting when using native and GPIO CS Date: Fri, 18 Oct 2019 17:29:29 +0200 Message-Id: <20191018152929.3287-1-gregory.clement@bootlin.com> X-Mailer: git-send-email 2.23.0 MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org When improving the CS GPIO support at core level, the SPI_CS_HIGH has been enabled for all the CS lines used for a given SPI controller. However, the SPI framework allows to have on the same controller native CS and GPIO CS. The native CS may not support the SPI_CS_HIGH, so they should not be setup automatically. With this patch the setting is done only for the CS that will use a GPIO as CS Fixes: f3186dd87669 ("spi: Optionally use GPIO descriptors for CS GPIOs") Cc: Signed-off-by: Gregory CLEMENT --- drivers/spi/spi.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 5414a10afd65..1b68acc28c8f 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1880,15 +1880,7 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, spi->mode |= SPI_3WIRE; if (of_property_read_bool(nc, "spi-lsb-first")) spi->mode |= SPI_LSB_FIRST; - - /* - * For descriptors associated with the device, polarity inversion is - * handled in the gpiolib, so all chip selects are "active high" in - * the logical sense, the gpiolib will invert the line if need be. - */ - if (ctlr->use_gpio_descriptors) - spi->mode |= SPI_CS_HIGH; - else if (of_property_read_bool(nc, "spi-cs-high")) + if (of_property_read_bool(nc, "spi-cs-high")) spi->mode |= SPI_CS_HIGH; /* Device DUAL/QUAD mode */ @@ -1952,6 +1944,14 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, } spi->chip_select = value; + /* + * For descriptors associated with the device, polarity inversion is + * handled in the gpiolib, so all gpio chip selects are "active high" + * in the logical sense, the gpiolib will invert the line if need be. + */ + if ((ctlr->use_gpio_descriptors) && ctlr->cs_gpiods[spi->chip_select]) + spi->mode |= SPI_CS_HIGH; + /* Device speed */ rc = of_property_read_u32(nc, "spi-max-frequency", &value); if (rc) { -- 2.23.0