[Patch 4/9] ARM: dts: DRA72: Add CAL dtsi node

Benoit Parrot
2019-10-18T15:46:49Z

This patch adds the required dtsi node to support the Camera
Adaptation Layer (CAL) for the DRA72 family of devices.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
arch/arm/boot/dts/dra72x.dtsi | 43 +++++++++++++++++++++++++++++++++++
1 file changed, 43 insertions(+)

diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index f5762709c853..29d4c7664e90 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -17,6 +17,49 @@
};
};

+&l4_per2 {
+ target-module@5b000 { /* 0x4845b000, ap 59 46.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x5b000 0x4>,
+ <0x5b010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>;
+ clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x5b000 0x1000>;
+
+ cal: cal@0 {
+ compatible = "ti,dra72-cal";
+ reg = <0x0000 0x400>,
+ <0x0800 0x40>,
+ <0x0900 0x40>;
+ reg-names = "cal_top",
+ "cal_rx_core0",
+ "cal_rx_core1";
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ syscon-camerrx = <&scm_conf 0xE94>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi2_0: port@0 {
+ reg = <0>;
+ };
+ csi2_1: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+ };
+};
+
&dss {
reg = <0x58000000 0x80>,
<0x58004054 0x4>,
--
2.17.1