[Patch 9/9] arm64: dts: k3-am654-base-board: Add CSI2 OV5640 camera

Benoit Parrot
2019-10-18T15:46:30Z

Add support for the OV5640 CSI camera:
- add the OV5640 nodes
- add the CAL node linkage
- enable CAL node

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
.../arm64/boot/dts/ti/k3-am654-base-board.dts | 36 +++++++++++++++++++
1 file changed, 36 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 1102b84f853d..918601c18f85 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -53,6 +53,12 @@
gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>;
};
};
+
+ clk_ov5640_fixed: clk_ov5640_fixed {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
};

&wkup_pmx0 {
@@ -184,6 +190,23 @@
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
clock-frequency = <400000>;
+
+ ov5640@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+
+ clocks = <&clk_ov5640_fixed>;
+ clock-names = "xclk";
+
+ port {
+ csi2_cam0: endpoint {
+ remote-endpoint = <&csi2_phy0>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+
};

&main_i2c2 {
@@ -280,3 +303,16 @@
&pcie1_ep {
status = "disabled";
};
+
+&cal {
+ status = "okay";
+};
+
+&csi2_0 {
+ csi2_phy0: endpoint@0 {
+ remote-endpoint = <&csi2_cam0>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+};
+
--
2.17.1