[PATCH AUTOSEL 5.3 66/99] nvme: Prevent resets during paused controller state

[Sasha Levin <sashal@kernel.org>]

From: Keith Busch <kbusch@kernel.org>

[ Upstream commit 4c75f877853cfa81b12374a07208e07b077f39b8 ]

A paused controller is doing critical internal activation work in the
background. Prevent subsequent controller resets from occurring during
this period by setting the controller state to RESETTING first. A helper
function, nvme_try_sched_reset_work(), is introduced for these paths so
they may continue with scheduling the reset_work after they've completed
their uninterruptible critical section.

Tested-by: Edmund Nadolski <edmund.nadolski@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 29 +++++++++++++++++++++++++----
 1 file changed, 25 insertions(+), 4 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 7284bee560a0f..b214df2f05850 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -118,6 +118,21 @@ static void nvme_queue_scan(struct nvme_ctrl *ctrl)
 		queue_work(nvme_wq, &ctrl->scan_work);
 }
 
+/*
+ * Use this function to proceed with scheduling reset_work for a controller
+ * that had previously been set to the resetting state. This is intended for
+ * code paths that can't be interrupted by other reset attempts. A hot removal
+ * may prevent this from succeeding.
+ */
+static int nvme_try_sched_reset(struct nvme_ctrl *ctrl)
+{
+	if (ctrl->state != NVME_CTRL_RESETTING)
+		return -EBUSY;
+	if (!queue_work(nvme_reset_wq, &ctrl->reset_work))
+		return -EBUSY;
+	return 0;
+}
+
 int nvme_reset_ctrl(struct nvme_ctrl *ctrl)
 {
 	if (!nvme_change_ctrl_state(ctrl, NVME_CTRL_RESETTING))
@@ -3687,13 +3702,13 @@ static void nvme_fw_act_work(struct work_struct *work)
 		if (time_after(jiffies, fw_act_timeout)) {
 			dev_warn(ctrl->device,
 				"Fw activation timeout, reset controller\n");
-			nvme_reset_ctrl(ctrl);
-			break;
+			nvme_try_sched_reset(ctrl);
+			return;
 		}
 		msleep(100);
 	}
 
-	if (ctrl->state != NVME_CTRL_LIVE)
+	if (!nvme_change_ctrl_state(ctrl, NVME_CTRL_LIVE))
 		return;
 
 	nvme_start_queues(ctrl);
@@ -3713,7 +3728,13 @@ static void nvme_handle_aen_notice(struct nvme_ctrl *ctrl, u32 result)
 		nvme_queue_scan(ctrl);
 		break;
 	case NVME_AER_NOTICE_FW_ACT_STARTING:
-		queue_work(nvme_wq, &ctrl->fw_act_work);
+		/*
+		 * We are (ab)using the RESETTING state to prevent subsequent
+		 * recovery actions from interfering with the controller's
+		 * firmware activation.
+		 */
+		if (nvme_change_ctrl_state(ctrl, NVME_CTRL_RESETTING))
+			queue_work(nvme_wq, &ctrl->fw_act_work);
 		break;
 #ifdef CONFIG_NVME_MULTIPATH
 	case NVME_AER_NOTICE_ANA:
-- 
2.20.1