From: Jonathan Cameron <jic23@kernel.org>
To: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <linux-iio@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Stefan Popa <stefan.popa@analog.com>
Subject: Re: [PATCH] iio: dac: ad5446: Add support for new AD5600 DAC
Date: Sun, 10 Nov 2019 15:15:55 +0000 [thread overview]
Message-ID: <20191110151555.38a0bb37@archlinux> (raw)
In-Reply-To: <20191106094721.25575-1-alexandru.ardelean@analog.com>
On Wed, 6 Nov 2019 11:47:21 +0200
Alexandru Ardelean <alexandru.ardelean@analog.com> wrote:
> From: Stefan Popa <stefan.popa@analog.com>
>
> The AD5600 is a single channel, 16-bit resolution, voltage output digital
> to analog converter (DAC). The AD5600 uses a 3-wire SPI interface. It is
> part of the AD5541 family of DACs.
>
> The ad5446 IIO driver implements support for some of these DACs (in the
> AD5441 family), so the change is a simple entry in this driver.
>
> Link: https://www.analog.com/media/en/technical-documentation/data-sheets/AD5600.pdf
>
> Signed-off-by: Stefan Popa <stefan.popa@analog.com>
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Applied to the togreg branch of iio.git and pushed out as testing
Thanks,
Jonathan
> ---
> drivers/iio/dac/Kconfig | 4 ++--
> drivers/iio/dac/ad5446.c | 6 ++++++
> 2 files changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
> index cc42219a64f7..979070196da9 100644
> --- a/drivers/iio/dac/Kconfig
> +++ b/drivers/iio/dac/Kconfig
> @@ -60,8 +60,8 @@ config AD5446
> help
> Say yes here to build support for Analog Devices AD5300, AD5301, AD5310,
> AD5311, AD5320, AD5321, AD5444, AD5446, AD5450, AD5451, AD5452, AD5453,
> - AD5512A, AD5541A, AD5542A, AD5543, AD5553, AD5601, AD5602, AD5611, AD5612,
> - AD5620, AD5621, AD5622, AD5640, AD5641, AD5660, AD5662 DACs
> + AD5512A, AD5541A, AD5542A, AD5543, AD5553, AD5600, AD5601, AD5602, AD5611,
> + AD5612, AD5620, AD5621, AD5622, AD5640, AD5641, AD5660, AD5662 DACs
> as well as Texas Instruments DAC081S101, DAC101S101, DAC121S101.
>
> To compile this driver as a module, choose M here: the
> diff --git a/drivers/iio/dac/ad5446.c b/drivers/iio/dac/ad5446.c
> index 7df8b4cc295d..61c670f7fc5f 100644
> --- a/drivers/iio/dac/ad5446.c
> +++ b/drivers/iio/dac/ad5446.c
> @@ -327,6 +327,7 @@ enum ad5446_supported_spi_device_ids {
> ID_AD5541A,
> ID_AD5512A,
> ID_AD5553,
> + ID_AD5600,
> ID_AD5601,
> ID_AD5611,
> ID_AD5621,
> @@ -381,6 +382,10 @@ static const struct ad5446_chip_info ad5446_spi_chip_info[] = {
> .channel = AD5446_CHANNEL(14, 16, 0),
> .write = ad5446_write,
> },
> + [ID_AD5600] = {
> + .channel = AD5446_CHANNEL(16, 16, 0),
> + .write = ad5446_write,
> + },
> [ID_AD5601] = {
> .channel = AD5446_CHANNEL_POWERDOWN(8, 16, 6),
> .write = ad5446_write,
> @@ -448,6 +453,7 @@ static const struct spi_device_id ad5446_spi_ids[] = {
> {"ad5542a", ID_AD5541A}, /* ad5541a and ad5542a are compatible */
> {"ad5543", ID_AD5541A}, /* ad5541a and ad5543 are compatible */
> {"ad5553", ID_AD5553},
> + {"ad5600", ID_AD5600},
> {"ad5601", ID_AD5601},
> {"ad5611", ID_AD5611},
> {"ad5621", ID_AD5621},
prev parent reply other threads:[~2019-11-10 15:16 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-06 9:47 [PATCH] iio: dac: ad5446: Add support for new AD5600 DAC Alexandru Ardelean
2019-11-10 15:15 ` Jonathan Cameron [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191110151555.38a0bb37@archlinux \
--to=jic23@kernel.org \
--cc=alexandru.ardelean@analog.com \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stefan.popa@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox