* [for-next][PATCH 1/2] ktest: Fix some typos in sample.conf
2019-11-13 18:49 [for-next][PATCH 0/2] ktest: Updates for 5.5 Steven Rostedt
@ 2019-11-13 18:49 ` Steven Rostedt
2019-11-13 18:50 ` [for-next][PATCH 2/2] ktest: Make default build option oldconfig not randconfig Steven Rostedt
1 sibling, 0 replies; 3+ messages in thread
From: Steven Rostedt @ 2019-11-13 18:49 UTC (permalink / raw)
To: linux-kernel; +Cc: John 'Warthog9' Hawley, Randy Dunlap, Masanari Iida
From: Masanari Iida <standby24x7@gmail.com>
This patch fixes some spelling typo in sample.conf
Link: http://lkml.kernel.org/r/20190930124925.20250-1-standby24x7@gmail.com
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
---
tools/testing/ktest/sample.conf | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf
index c3bc933d437b..10af34819642 100644
--- a/tools/testing/ktest/sample.conf
+++ b/tools/testing/ktest/sample.conf
@@ -10,7 +10,7 @@
#
# Options set in the beginning of the file are considered to be
-# default options. These options can be overriden by test specific
+# default options. These options can be overridden by test specific
# options, with the following exceptions:
#
# LOG_FILE
@@ -204,7 +204,7 @@
#
# This config file can also contain "config variables".
# These are assigned with ":=" instead of the ktest option
-# assigment "=".
+# assignment "=".
#
# The difference between ktest options and config variables
# is that config variables can be used multiple times,
@@ -263,7 +263,7 @@
#### Using options in other options ####
#
# Options that are defined in the config file may also be used
-# by other options. All options are evaulated at time of
+# by other options. All options are evaluated at time of
# use (except that config variables are evaluated at config
# processing time).
#
@@ -707,7 +707,7 @@
# Line to define a successful boot up in console output.
# This is what the line contains, not the entire line. If you need
-# the entire line to match, then use regural expression syntax like:
+# the entire line to match, then use regular expression syntax like:
# (do not add any quotes around it)
#
# SUCCESS_LINE = ^MyBox Login:$
@@ -839,7 +839,7 @@
# (ignored if POWEROFF_ON_SUCCESS is set)
#REBOOT_ON_SUCCESS = 1
-# In case there are isses with rebooting, you can specify this
+# In case there are issues with rebooting, you can specify this
# to always powercycle after this amount of time after calling
# reboot.
# Note, POWERCYCLE_AFTER_REBOOT = 0 does NOT disable it. It just
@@ -848,7 +848,7 @@
# (default undefined)
#POWERCYCLE_AFTER_REBOOT = 5
-# In case there's isses with halting, you can specify this
+# In case there's issues with halting, you can specify this
# to always poweroff after this amount of time after calling
# halt.
# Note, POWEROFF_AFTER_HALT = 0 does NOT disable it. It just
@@ -972,7 +972,7 @@
#
# PATCHCHECK_START is required and is the first patch to
# test (the SHA1 of the commit). You may also specify anything
-# that git checkout allows (branch name, tage, HEAD~3).
+# that git checkout allows (branch name, tag, HEAD~3).
#
# PATCHCHECK_END is the last patch to check (default HEAD)
#
@@ -994,7 +994,7 @@
# IGNORE_WARNINGS is set for the given commit's sha1
#
# IGNORE_WARNINGS can be used to disable the failure of patchcheck
-# on a particuler commit (SHA1). You can add more than one commit
+# on a particular commit (SHA1). You can add more than one commit
# by adding a list of SHA1s that are space delimited.
#
# If BUILD_NOCLEAN is set, then make mrproper will not be run on
@@ -1093,7 +1093,7 @@
# whatever reason. (Can't reboot, want to inspect each iteration)
# Doing a BISECT_MANUAL will have the test wait for you to
# tell it if the test passed or failed after each iteration.
-# This is basicall the same as running git bisect yourself
+# This is basically the same as running git bisect yourself
# but ktest will rebuild and install the kernel for you.
#
# BISECT_CHECK = 1 (optional, default 0)
@@ -1239,7 +1239,7 @@
#
# CONFIG_BISECT_EXEC (optional)
# The config bisect is a separate program that comes with ktest.pl.
-# By befault, it will look for:
+# By default, it will look for:
# `pwd`/config-bisect.pl # the location ktest.pl was executed from.
# If it does not find it there, it will look for:
# `dirname <ktest.pl>`/config-bisect.pl # The directory that holds ktest.pl
--
2.23.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [for-next][PATCH 2/2] ktest: Make default build option oldconfig not randconfig
2019-11-13 18:49 [for-next][PATCH 0/2] ktest: Updates for 5.5 Steven Rostedt
2019-11-13 18:49 ` [for-next][PATCH 1/2] ktest: Fix some typos in sample.conf Steven Rostedt
@ 2019-11-13 18:50 ` Steven Rostedt
1 sibling, 0 replies; 3+ messages in thread
From: Steven Rostedt @ 2019-11-13 18:50 UTC (permalink / raw)
To: linux-kernel; +Cc: John 'Warthog9' Hawley
From: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
For the last time, I screwed up my ktest config file, and the build went
into the default "randconfig", blowing away the .config that I had set up.
The reason for the default randconfig was because when this was first
written, I wanted to do a bunch of randconfigs. But as time progressed,
ktest isn't about randconfig anymore, and because randconfig destroys the
config in the build directory, it's a dangerous default to have. Use
oldconfig as the default.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
---
tools/testing/ktest/ktest.pl | 2 +-
tools/testing/ktest/sample.conf | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index 220d04f958a6..6a605ba75dd6 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -30,7 +30,7 @@ my %default = (
"EMAIL_WHEN_STARTED" => 0,
"NUM_TESTS" => 1,
"TEST_TYPE" => "build",
- "BUILD_TYPE" => "randconfig",
+ "BUILD_TYPE" => "oldconfig",
"MAKE_CMD" => "make",
"CLOSE_CONSOLE_SIGNAL" => "INT",
"TIMEOUT" => 120,
diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf
index 10af34819642..27666b8007ed 100644
--- a/tools/testing/ktest/sample.conf
+++ b/tools/testing/ktest/sample.conf
@@ -505,7 +505,7 @@
#TEST = ssh user@machine /root/run_test
# The build type is any make config type or special command
-# (default randconfig)
+# (default oldconfig)
# nobuild - skip the clean and build step
# useconfig:/path/to/config - use the given config and run
# oldconfig on it.
--
2.23.0
^ permalink raw reply related [flat|nested] 3+ messages in thread