[PATCH 4/5] ARM: dts: rockchip: Add Radxa Carrier board

[Jagan Teki <jagan@amarulasolutions.com>]

Carrier board often referred as baseboard. For making
complete SBC, the associated SOM will mount on top of
this carrier board.

Radxa has a carrier board which supports on board
peripherals, ports like USB-2.0, USB-3.0, HDMI, MIPI DSI/CSI,
eDP, Ethernet, PCIe, USB-C, 40-Pin GPIO header and etc.

Currently this carrier board can be used together with
VMARC RK3399Por SOM for making Rock PI N10 SBC.

So add this carrier board dtsi as a separate file in
ARM directory, so-that the same can reuse it in both
arm32 and arm64 variants of Rockchip SOMs.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 .../boot/dts/rockchip-radxa-carrierboard.dtsi | 81 +++++++++++++++++++
 1 file changed, 81 insertions(+)
 create mode 100644 arch/arm/boot/dts/rockchip-radxa-carrierboard.dtsi

diff --git a/arch/arm/boot/dts/rockchip-radxa-carrierboard.dtsi b/arch/arm/boot/dts/rockchip-radxa-carrierboard.dtsi
new file mode 100644
index 000000000000..df3712aedf8a
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip-radxa-carrierboard.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+};
+
+&gmac {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	i2c-scl-rising-time-ns = <140>;
+	i2c-scl-falling-time-ns = <30>;
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	vqmmc-supply = <&vccio_sd>;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins =
+				<4 RK_PD6 0 &pcfg_pull_up>;
+		};
+	};
+};
-- 
2.18.0.321.gffc6fa0e3