[Patch v4 09/10] arm64: dts: k3-am65-main Add CAL node

Benoit Parrot
2019-12-11T14:03:20Z

Add CAL dtsi node for AM654 device. Including proper power-domains and
clock properties.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index efb24579922c..551adcefcc83 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -624,4 +624,26 @@
dma-coherent;
interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
};
+
+ cal: cal@6f03000 {
+ compatible = "ti,am654-cal";
+ reg = <0x0 0x06f03000 0x0 0x400>,
+ <0x0 0x06f03800 0x0 0x40>;
+ reg-names = "cal_top",
+ "cal_rx_core0";
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ ti,camerrx-control = <&scm_conf 0x40c0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 2 0>;
+ power-domains = <&k3_pds 2 TI_SCI_PD_EXCLUSIVE>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi2_0: port@0 {
+ reg = <0>;
+ };
+ };
+ };
};
--
2.17.1