From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>,
Michael Walle <michael@walle.cc>,
Linus Walleij <linus.walleij@linaro.org>,
Sasha Levin <sashal@kernel.org>,
linux-gpio@vger.kernel.org
Subject: [PATCH AUTOSEL 4.4 30/37] gpio: mpc8xxx: Don't overwrite default irq_set_type callback
Date: Wed, 11 Dec 2019 10:38:06 -0500 [thread overview]
Message-ID: <20191211153813.24126-30-sashal@kernel.org> (raw)
In-Reply-To: <20191211153813.24126-1-sashal@kernel.org>
From: Vladimir Oltean <vladimir.oltean@nxp.com>
[ Upstream commit 4e50573f39229d5e9c985fa3b4923a8b29619ade ]
The per-SoC devtype structures can contain their own callbacks that
overwrite mpc8xxx_gpio_devtype_default.
The clear intention is that mpc8xxx_irq_set_type is used in case the SoC
does not specify a more specific callback. But what happens is that if
the SoC doesn't specify one, its .irq_set_type is de-facto NULL, and
this overwrites mpc8xxx_irq_set_type to a no-op. This means that the
following SoCs are affected:
- fsl,mpc8572-gpio
- fsl,ls1028a-gpio
- fsl,ls1088a-gpio
On these boards, the irq_set_type does exactly nothing, and the GPIO
controller keeps its GPICR register in the hardware-default state. On
the LS1028A, that is ACTIVE_BOTH, which means 2 interrupts are raised
even if the IRQ client requests LEVEL_HIGH. Another implication is that
the IRQs are not checked (e.g. level-triggered interrupts are not
rejected, although they are not supported).
Fixes: 82e39b0d8566 ("gpio: mpc8xxx: handle differences between incarnations at a single place")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20191115125551.31061-1-olteanv@gmail.com
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpio/gpio-mpc8xxx.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
index 9e02cb6afb0bb..ce6e15167d0b2 100644
--- a/drivers/gpio/gpio-mpc8xxx.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -409,7 +409,8 @@ static int mpc8xxx_probe(struct platform_device *pdev)
* It's assumed that only a single type of gpio controller is available
* on the current machine, so overwriting global data is fine.
*/
- mpc8xxx_irq_chip.irq_set_type = devtype->irq_set_type;
+ if (devtype->irq_set_type)
+ mpc8xxx_irq_chip.irq_set_type = devtype->irq_set_type;
gc->direction_output = devtype->gpio_dir_out ?: mpc8xxx_gpio_dir_out;
gc->get = devtype->gpio_get ?: mpc8xxx_gpio_get;
--
2.20.1
next prev parent reply other threads:[~2019-12-11 15:39 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-11 15:37 [PATCH AUTOSEL 4.4 01/37] scsi: mpt3sas: Fix clear pending bit in ioctl status Sasha Levin
2019-12-11 15:37 ` [PATCH AUTOSEL 4.4 02/37] scsi: lpfc: Fix locking on mailbox command completion Sasha Levin
2019-12-11 15:37 ` [PATCH AUTOSEL 4.4 03/37] Input: atmel_mxt_ts - disable IRQ across suspend Sasha Levin
2019-12-11 15:37 ` [PATCH AUTOSEL 4.4 04/37] iommu/tegra-smmu: Fix page tables in > 4 GiB memory Sasha Levin
2019-12-11 15:37 ` [PATCH AUTOSEL 4.4 05/37] scsi: target: compare full CHAP_A Algorithm strings Sasha Levin
2019-12-11 15:37 ` [PATCH AUTOSEL 4.4 06/37] scsi: lpfc: Fix SLI3 hba in loop mode not discovering devices Sasha Levin
2019-12-11 15:37 ` [PATCH AUTOSEL 4.4 07/37] scsi: csiostor: Don't enable IRQs too early Sasha Levin
2019-12-11 15:37 ` [PATCH AUTOSEL 4.4 08/37] powerpc/pseries: Mark accumulate_stolen_time() as notrace Sasha Levin
2019-12-11 15:37 ` [PATCH AUTOSEL 4.4 09/37] dma-debug: add a schedule point in debug_dma_dump_mappings() Sasha Levin
2019-12-11 15:37 ` [PATCH AUTOSEL 4.4 10/37] clocksource/drivers/asm9260: Add a check for of_clk_get Sasha Levin
2019-12-11 15:37 ` [PATCH AUTOSEL 4.4 11/37] powerpc/security/book3s64: Report L1TF status in sysfs Sasha Levin
2019-12-11 15:37 ` [PATCH AUTOSEL 4.4 12/37] jbd2: Fix statistics for the number of logged blocks Sasha Levin
2019-12-11 15:37 ` [PATCH AUTOSEL 4.4 13/37] scsi: tracing: Fix handling of TRANSFER LENGTH == 0 for READ(6) and WRITE(6) Sasha Levin
2019-12-11 15:37 ` [PATCH AUTOSEL 4.4 14/37] scsi: lpfc: Fix duplicate unreg_rpi error in port offline flow Sasha Levin
2019-12-11 15:37 ` [PATCH AUTOSEL 4.4 15/37] clk: qcom: Allow constant ratio freq tables for rcg Sasha Levin
2019-12-11 15:37 ` [PATCH AUTOSEL 4.4 16/37] irqchip/irq-bcm7038-l1: Enable parent IRQ if necessary Sasha Levin
2019-12-11 15:37 ` [PATCH AUTOSEL 4.4 17/37] irqchip: ingenic: Error out if IRQ domain creation failed Sasha Levin
2019-12-11 15:37 ` [PATCH AUTOSEL 4.4 18/37] mfd: mfd-core: Honour Device Tree's request to disable a child-device Sasha Levin
2019-12-11 15:37 ` [PATCH AUTOSEL 4.4 19/37] fs/quota: handle overflows of sysctl fs.quota.* and report as unsigned long Sasha Levin
2019-12-11 15:37 ` [PATCH AUTOSEL 4.4 20/37] scsi: lpfc: fix: Coverity: lpfc_cmpl_els_rsp(): Null pointer dereferences Sasha Levin
2019-12-11 15:37 ` [PATCH AUTOSEL 4.4 21/37] scsi: ufs: fix potential bug which ends in system hang Sasha Levin
2019-12-11 15:37 ` [PATCH AUTOSEL 4.4 22/37] powerpc/pseries/cmm: Implement release() function for sysfs device Sasha Levin
2019-12-11 15:37 ` [PATCH AUTOSEL 4.4 23/37] powerpc/security: Fix wrong message when RFI Flush is disable Sasha Levin
2019-12-11 15:38 ` [PATCH AUTOSEL 4.4 24/37] clk: pxa: fix one of the pxa RTC clocks Sasha Levin
2019-12-11 15:38 ` [PATCH AUTOSEL 4.4 25/37] bcache: at least try to shrink 1 node in bch_mca_scan() Sasha Levin
2019-12-11 15:38 ` [PATCH AUTOSEL 4.4 26/37] HID: Improve Windows Precision Touchpad detection Sasha Levin
2019-12-11 15:38 ` [PATCH AUTOSEL 4.4 27/37] ext4: work around deleting a file with i_nlink == 0 safely Sasha Levin
2019-12-11 16:19 ` Theodore Y. Ts'o
2019-12-11 18:25 ` Greg KH
2019-12-11 20:04 ` Sasha Levin
2019-12-12 15:17 ` Theodore Y. Ts'o
2019-12-13 0:54 ` Sasha Levin
2019-12-11 15:38 ` [PATCH AUTOSEL 4.4 28/37] scsi: pm80xx: Fix for SATA device discovery Sasha Levin
2019-12-11 15:38 ` [PATCH AUTOSEL 4.4 29/37] scsi: target: iscsi: Wait for all commands to finish before freeing a session Sasha Levin
2019-12-11 15:38 ` Sasha Levin [this message]
2019-12-11 15:38 ` [PATCH AUTOSEL 4.4 31/37] scripts/kallsyms: fix definitely-lost memory leak Sasha Levin
2019-12-11 15:38 ` [PATCH AUTOSEL 4.4 32/37] cdrom: respect device capabilities during opening action Sasha Levin
2019-12-11 15:38 ` [PATCH AUTOSEL 4.4 33/37] perf regs: Make perf_reg_name() return "unknown" instead of NULL Sasha Levin
2019-12-11 15:38 ` [PATCH AUTOSEL 4.4 34/37] libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h Sasha Levin
2019-12-11 15:38 ` [PATCH AUTOSEL 4.4 35/37] s390/cpum_sf: Check for SDBT and SDB consistency Sasha Levin
2019-12-11 15:38 ` [PATCH AUTOSEL 4.4 36/37] ocfs2: fix passing zero to 'PTR_ERR' warning Sasha Levin
2019-12-11 15:38 ` [PATCH AUTOSEL 4.4 37/37] kernel: sysctl: make drop_caches write-only Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191211153813.24126-30-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michael@walle.cc \
--cc=stable@vger.kernel.org \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox