[PATCH] regulator: bd71828: remove get_voltage operation

[Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>]

Simplify LDO6 voltage getting on BD71828 by removing the
get_voltage call-back and providing the fixed voltage in
regulator_desc instead

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Suggested-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/bd71828-regulator.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/regulator/bd71828-regulator.c b/drivers/regulator/bd71828-regulator.c
index edba51da5661..b2fa17be4988 100644
--- a/drivers/regulator/bd71828-regulator.c
+++ b/drivers/regulator/bd71828-regulator.c
@@ -197,15 +197,9 @@ static const struct regulator_ops bd71828_ldo_ops = {
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 };
 
-static int bd71828_ldo6_get_voltage(struct regulator_dev *rdev)
-{
-	return BD71828_LDO_6_VOLTAGE;
-}
-
 static const struct regulator_ops bd71828_ldo6_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
-	.get_voltage = bd71828_ldo6_get_voltage,
 	.is_enabled = regulator_is_enabled_regmap,
 };
 
@@ -697,6 +691,7 @@ static const struct bd71828_regulator_data bd71828_rdata[] = {
 			.id = BD71828_LDO6,
 			.ops = &bd71828_ldo6_ops,
 			.type = REGULATOR_VOLTAGE,
+			.fixed_uV = BD71828_LDO_6_VOLTAGE,
 			.n_voltages = 1,
 			.enable_reg = BD71828_REG_LDO6_EN,
 			.enable_mask = BD71828_MASK_RUN_EN,

base-commit: 522498f8cb8c547f415a9a39fb54fd1f7e1a1eda
-- 
2.21.0


-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]